Search NASA⌕ Search
Home/Archive/DOE OSTI

DOE OSTI · 1077181

HERMES Model Modifications and Applications 2012

Reaugh, John E.
View original source ↗Read source document ↗Export metadata ↓

Abstract

HERMES was developed to meet requirements for a model to describe explosive response to impacts that do not produce prompt detonation, but can include delayed detonations such as DDT and XDT. Such response is termed High Explosive Violent Response (HEVR). The HERMES model includes a constitutive description of strength as a function of pressure, strain-rate, strain, and ambient temperature; the development of damage including fragmentation and porosity; the conditions leading to ignition; the propagation of a burning reaction through the volume of damaged explosive; the burn-up of the damaged and undamaged explosive; and the development of detonation using the Computational Reaction Evolution dependent on Entropy (S) and Time (CREST) detonation model. CREST can distinguish gradual pressure increases from shock waves, and also predict the increase in shock sensitivity to detonation that results from increased porosity. This year HERMES has been implemented as a User Defined Function in ALE 3D. As a result, modifications to the model can be implemented in a timely fashion asynchronously from the ALE 3D distribution process. There are differences between the implementation of HERMES in ALE 3D and the implementation in LS DYNA. The major difference is the propagation of an ignition front from an element that has started to burn. In LS DYNA, the time at which an element begins to burn is based on the minimum line-of-sight distance between the element and any previously ignited element. In ALE 3D the time to burn is based on a level-set method that propagates the ignition front from all elements that were previously ignited. The ALE 3D implementation modifies the time of ignition when element deformation changes the distance from the element to the source. The LS DYNA implementation does not. There are also differences in the implementation of artificial viscosity, which is important for CREST since the artificial viscosity increases the element entropy in a shock. In general, however, the differences have proven minor. In collaboration with the Atomic Weapons Establishment, UK (AWE), we have characterized two additional explosives – PETN and Composition B, a mixture of 60% RDX and 40% TNT by weight. Applications of HERMES to these explosives are described below.

Explore related subjects

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMISTRY71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS97 MATHEMATICS AND COMPUTING

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Reaugh, John E.. 2013-04-17. HERMES Model Modifications and Applications 2012. https://doi.org/10.2172/1077181

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2026

Frontiers in divalent $f$-block chemistry

Divalent f-block chemistry has undergone rapid expansion in recent years, driven by advances in the stabilization of low-valent lanthanide and actinide complexes. Although f-elements were historically accessed in the +3 or higher oxidation states, the isolation of +2 species has revealed unusual spectroscopic signatures, distinct bonding motifs, and multiple accessible electronic configurations that influence their chemical and physical properties. These developments have generated opportunities in areas including quantum information science, molecular magnetism, catalysis, and luminescence. Computational chemistry has played a pivotal role in interpreting the electronic structure and reactivity of these systems. However, accurately modeling divalent f-block complexes remains challenging because of strong electronic correlation, multiconfigurational character, and the presence of close-in-energy competing electronic states. As experimental capabilities and theoretical methodologies continue to advance, a comprehensive assessment of divalent chemistry is both timely and needed. In this Review, we integrate experimental and theoretical perspectives to provide a systematic analysis of divalent lanthanide and actinide complexes across the f-block series. We critically assess the role of ligands in determining competing ground-state configurations (f n d 1 vs. f n+1 ) resulting in their distinct spectroscopic, magnetic, and bonding properties. Finally, we discuss emerging strategies for predictive modeling and rational design of low-valent f-block molecular systems, with potential applications ranging from dinitrogen reduction to quantum technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Unveiling the electronic structure and chemical bonding of the deprotonated cisplatin anion [(NH 3 )(NH 2 )PtCl 2 ] − via low-temperature photoelectron spectroscopy and theoretical calculations

The dehydrogenated cisplatin anion, [(NH 3 )(NH 2 )PtCl 2 ] − , was investigated via low-temperature photoelectron spectroscopy and theoretical calculations. Seven and four spectral peaks are respectively resolved at 193 and 266 nm, yielding rich electronic structure information for both the anion and neutral. From the threshold and maximum of the lowest electron binding energy band, the experimental adiabatic (ADE) and vertical detachment energies (VDE) are determined to be 3.3 ± 0.1 and 3.525 ± 0.025 eV, respectively. Theoretical calculations indicate the dominant isomer adopting a cis-geometry, in which the platinum center is coplanar with two chlorine and two nitrogen ligands. The calculated VDE of 3.54 eV based on this structure agrees well with the experimental value. Charge analyses reveal that the excess electron in the anion is primarily localized on the Pt and Cl atoms. A suite of theoretical analysis tools was employed to elucidate the bonding characteristics and interaction strength between Pt and its ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Adsorption, charge transfer and a coverage-driven transition of alkali metals on rutile TiO 2 (110)

The interaction of alkali metals with metal oxide surfaces is central to tuning surface reactivity in heterogeneous catalysis and photocatalysis. Here we present a comprehensive DFT+U study of the adsorption of alkali metals (Li, Na, K, Rb, Cs) on the (110) surface of rutile TiO 2 . At low coverage (θ = 1/8), all alkali metals bind preferentially to bridging oxygen sites with adsorption energies in the range −4.06 to −3.33 eV, transferring nearly one full electron (0.92–0.99 |e|) to the substrate and inducing Ti 4+ → Ti 3+ reduction. The excess charge localizes preferentially at subsurface Ti sites in the form of small polarons. Diffusion barriers indicate facile motion along bridging-oxygen rows, whereas inter-row hopping is strongly hindered. Coverage effects were examined systematically for potassium: adsorption energy and charge transfer per K atom decrease monotonically with increasing θ. Strikingly, a sharp energy discontinuity occurs between θ = 4/8 and θ = 5/8 (ΔE ≈ 1 eV per atom), which we identify as a coverage-driven structural transition arising from steric packing constraints and enhanced K–K electrostatic repulsion once every (1×1) surface cell is occupied. This structural transition perfectly correlates with a dramatic drop in the work function down to an ultra-low minimum of 0.84 eV at θ=5/8, followed by a metallization- driven recovery at higher coverages. Ab initio molecular dynamics simulations confirm zigzag K arrangements at moderate coverage (θ = 1/3), while at high coverage (θ = 2/3) short-range K–K correlations emerge without long-range order. These results provide atomistic insight into the structure–activity relationships underlying alkali promotion effects on oxide-supported catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗