Search NASA⌕ Search

DOE OSTI · 1310632

Materials Data on Lu2Mn12P7 by Materials Project

Abstract

Lu2Mn12P7 crystallizes in the hexagonal P-6 space group. The structure is three-dimensional. there are two inequivalent Lu sites. In the first Lu site, Lu is bonded in a 6-coordinate geometry to six equivalent P atoms. All Lu–P bond lengths are 2.81 Å. In the second Lu site, Lu is bonded in a 6-coordinate geometry to six equivalent P atoms. All Lu–P bond lengths are 2.82 Å. There are four inequivalent Mn sites. In the first Mn site, Mn is bonded to four P atoms to form distorted MnP4 tetrahedra that share corners with two equivalent MnP5 square pyramids, corners with twelve MnP4 tetrahedra, edges with two equivalent MnP5 square pyramids, and edges with three MnP4 tetrahedra. There are a spread of Mn–P bond distances ranging from 2.29–2.36 Å. In the second Mn site, Mn is bonded to four P atoms to form distorted MnP4 tetrahedra that share corners with two equivalent MnP5 square pyramids, corners with ten MnP4 tetrahedra, edges with four equivalent MnP5 square pyramids, and edges with three MnP4 tetrahedra. There are a spread of Mn–P bond distances ranging from 2.22–2.29 Å. In the third Mn site, Mn is bonded to four P atoms to form MnP4 tetrahedra that share corners with four equivalent MnP5 square pyramids, corners with ten MnP4 tetrahedra, an edgeedge with one MnP5 square pyramid, and edges with four MnP4 tetrahedra. There are a spread of Mn–P bond distances ranging from 2.31–2.33 Å. In the fourth Mn site, Mn is bonded to five P atoms to form distorted MnP5 square pyramids that share corners with four equivalent MnP5 square pyramids, corners with eight MnP4 tetrahedra, edges with four equivalent MnP5 square pyramids, and edges with seven MnP4 tetrahedra. There are a spread of Mn–P bond distances ranging from 2.43–2.52 Å. There are three inequivalent P sites. In the first P site, P is bonded in a 9-coordinate geometry to two equivalent Lu and seven Mn atoms. In the second P site, P is bonded in a 9-coordinate geometry to two equivalent Lu and seven Mn atoms. In the third P site, P is bonded in a 9-coordinate geometry to nine Mn atoms.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

2020-07-18. Materials Data on Lu2Mn12P7 by Materials Project. https://doi.org/10.17188/1310632

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗