Search NASA⌕ Search

DOE OSTI · 1357247

Plasma Interaction with Electron-Emitting Surfaces

Abstract

Electron emission from surfaces occurs in many plasma systems. Several types including secondary, thermionic and photon-induced emissions are intense under certain conditions. Understanding the effects of emission on the sheaths that govern plasma-surface interaction is important. This dissertation predicts some emitting sheath phenomena that were not reported in past studies. For example, most previous theoretical models assumed that an emitting sheath potential is always negative and that ions always accelerate into the wall. We show when the emission is intense that the sheath potential can become positive, fundamentally changing how the plasma and wall interact. In this inverse sheath state, ions are repelled, suggesting for instance that (a) no presheath exists in the plasma interior, (b) emitting walls could be used in applications to stop sputtering. Another topic considered is the transit of emitted electrons across the plasma to other surfaces, which is possible in low collisionality plasma systems. When transit occurs, the flux balance is a complex global problem where the sheaths at opposite surfaces are coupled through their exchange of emitted electrons. We also show that secondary emission can trigger a variety of sheath instability phenomena that change the state of the plasma-wall system or cause oscillations preventing steady state. Lastly, we analyze a mechanism where emitted electrons return to the same surface and knock out secondaries, which return and knock out more secondaries, etc., feedback amplifying the emission intensity. The four phenomena will be analyzed theoretically and verified with particle-in-cell simulations: (a) inverse sheath, (b) sheath coupling via transiting electrons, (c) sheath instabilities, (d) returning electron amplification. Consequences of these processes on the sheath potentials, wall heating, loss rate of charge, and cross field transport (near-wall conductivity) are discussed throughout. Possible implications are suggested for fusion machines, plasma propulsion engines, probes, dusty plasmas, RF discharges, and surfaces in space.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Campanell, Michael. 2014-09-01. Plasma Interaction with Electron-Emitting Surfaces. https://www.osti.gov/biblio/1357247

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Integral Nuclear Data and Benchmarking Needs for Fusion Energy Systems

Fusion energy systems are currently being designed and optimized using radiation transport codes. To deal with the unique environment inside a fusion-based system, many of these designs incorporate novel materials able to withstand the high radiation fields, ensure adequate cooling and thermal protection, and produce tritium. Validation plays a vital role in building trust in the predictive power of these models and computational methods. Validation of a code consists of modeling documented real-world experiments and comparing the code-predicted response to the measured response. Adequate validation requires measured responses from real-world experiments, also known as integral data, that mimic the system being designed, including materials, impinging radiation, and temperature, among other variables. The most trusted integral data are experimental responses that have been through a rigorous benchmarking process that develops a recommended computational model and evaluates all experimental uncertainties. Finally, there are a few research groups around the world that have been producing integral data for fusion applications, but a substantial investment is needed to address the unique validation needs of the fusion community.

Fusion↗

Pulsed Fission-Fusion (PuFF)

In September 2013 the NASA Innovative Advanced Concept (NIAC) organization awarded a phase I contract to the PuFF team. Our phase 1 proposal discussed a pulsed fission-fusion propulsion system that injected gaseous deuterium (D) and tritium (T) as a mixture in a column, surrounded concentrically by gaseous uranium fluoride (UF6) and then an outer shell of liquid lithium. A high power current would flow down the liquid lithium and the resulting Lorentz force would compress the column by roughly a factor of 10. The compressed column would reach criticality and a combination of fission and fusion reactions would occur. The fission reactions would further energize the fusion center, and the fusion reactions would generate neutrons that promote more complete burnup of the fission fuel. The lithium liner provides some help as a neutron reflector but also acts as a propulsive medium, being converted to plasma which is then expanded against a magnetic nozzle for thrust. The expansion of the (primarily) lithium plasma against the nozzle's magnetic field inducts a current that is used to charge the system for the next pulse. Our concept also included secondary injection of a Field Reversed Configuration (FRC) plasmoid that would provide a secondary compression direction, axially against the column, and push the column away from the injection manifold, increasing the manifold's survivability.Our phase 1 proposal included modeling the above process first under steady state assumptions and second under a time variant integration. We proposed including these results into a Mars concept vehicle and finally proposing promising conditions to be evaluated experimentally in Phase II. In phase I we quickly realized that we needed to modify our approach. Our steady state work was completed as proposed, and the results indicated that one, a two stage compression system was not needed and two, that we wanted to move away from UF6. The steady state model shows much more margin than expected, to the point that we may well reach breakeven with the Charger – 1 facility, a 572 kJ Marx bank currently under refurbishment at UAH. Additionally we found that using gaseous D-T and UF6, provided a relatively simple prospect of using a pulsed injector, made reaching criticality more difficult. The introduction of large amounts of fluorine meant a radiative sink, sapping power from the fusion plasma and was harder to handle. Therefore we moved to a solid uranium target that held D-T under pressure. In so doing we could move our target closer to criticality and remove any material that did not sustain the reaction.

Fusion↗