Search NASA⌕ Search

DOE OSTI · 1432961

Scoping Study on Developing Alternatives to Radionuclide-based Logging Technologies

Abstract

Subsurface devices utilizing radioisotopes, 241 Am and 137 Cs, are critical for reservoir characterization and related completion and production decisions. Being small, mobile and used widely worldwide, these sources can pose radiological dispersal device (RDD) security risks. The security concerns have been exacerbated by recent stolen or missing source incidents, existence of a black-market on sources in general, and attempts at their malevolent use. Consequently, in addition to decades-long industry effort to develop non-nuclear and nuclear-based alternative logging technologies, governments, international agencies, and national labs are actively assessing measures and technologies to mitigate risks of such sources. Risk mitigation efforts include enhanced regulations, source-use guidelines, research and development on electronic tracking of sources, and continued exploration of alternative technologies by both the petroleum industry and U S Department of Energy (DOE). In recent years, the petroleum industry has continued to explore new nuclear-based and nonnuclear alternative techniques and several DOE-sponsored reports have been prepared on the topic. However, there has been no significant synergy between the industry and DOE efforts in developing alternatives.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Badruzzaman, Ahmed, Dowla, Farid, Chien, Hual-Te, Antolak, Arlyn, Schmidt, Andrea, Bakhtiari, Susan. 2015-11-06. Scoping Study on Developing Alternatives to Radionuclide-based Logging Technologies. https://doi.org/10.2172/1432961

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Carbon Capture and Utilization for Protein and Fatty Acids

The unlimited release version of the final report for the "Carbon Capture and Utilization for Protein and Fatty Acids" project. This project advanced an integrated open raceway algae cultivation and processing system to engineering scale for carbon capture and utilization (CCU) from the flue gas of a naphtha-fired power plant.

02 PETROLEUM↗

Oil in Alaska North Slope Gas Hydrate Reservoir: Micro-CT and Flow Simulation Insights into Permeability

Gas hydrate-bearing sands on the Alaska North Slope (ANS) host minor volumes of crude oil whose impact on formation permeability has never been quantified relative to a gas hydrate reservoir system. Here, we combine in situ pressure-core microcomputed-tomography (μ-CT), thermogravimetric analysis (TGA), gas-chromatography–mass-spectrometry (GC–MS), scanning-electron microscopy coupled with energy-dispersive spectroscopy (SEM-EDS), and Stokes-flow simulation to (i) quantify oil saturation, (ii) infer its source, and (iii) evaluate its influence on permeability after gas-hydrate dissociation. μ-CT and SEM-EDS imaging identify the host sediment as silty, with some grain-coating clay present. Eight representative 3003-voxel subvolumes extracted from a preserved pressure core (Core 15P-3c, from the B1 sand (unit B), HYDRATE 02 Geo Data Well (GDW), 886.96–887.29 m measured depth, MD) exhibit porosities of 0.34–0.37 and an average oil saturation of 0.09 ± 0.03, in comparison to an independent TGA-based estimate of 0.16. GC-MS fingerprints obtained from an adjacent depressurized core (Core 17P-1, 891.37–891.44 m MD), together with oil pore habit revealed by μ-CT, suggest that the oil is partly native but also includes contributions from mineral oil-based drilling fluid contamination. Further analysis of oil–porewater interactions and flushing tests confirms that native oil saturation in the analyzed samples ranges from 0.04 to 0.08 with an average of approximately 0.06, and the oil is highly immobile. Flow simulations demonstrate that the native oil saturation of ≈0.06 reduces permeability by approximately 50% due to both pore blockage and increased flow-path tortuosity. These findings reveal the potential presence of native oil within the ANS gas hydrate reservoir and suggest that future simulation models may need to account for its impact on permeability to improve long-term performance predictions of gas and water production.

02 PETROLEUM↗

Quantum Enhanced Fiber Sensing for Oil and Gas Applications (Final Technical Report)

The major goal of the project was to develop a quantum sensing approach compatible with current infrastructure in the oil and gas industry that could provide a quantum enhancement, with a focus towards pipeline leak detection. The proposed approach to achieving this goal consisted of the use of quantum states of light to enhance the sensitivity of fiber optic sensors beyond the classical limit. To address the limitations of existing commercial leak detection, the project focused on the study of two technologies: distributed acoustic sensors (DAS) and fiber Bragg grating (FBG)-based sensors. The initial phase of the project centered around the identification and mitigation of dominant sources of classical noise to enable operation at the classical shot noise limit (SNL). The second phase focused on the use of quantum resources to obtain sensitivities beyond the classical SNL. The final phase sought to combine quantum noise reduction techniques with advanced dynamical classical noise cancelation approaches.

02 PETROLEUM↗