Search NASA⌕ Search

DOE OSTI · 1474730

Nuclear Data Sheets for A=244

Abstract

Available information pertaining to the nuclear structure of ground and excited states for all known nuclei with mass numbers A=244 have been compiled and evaluated. The adopted level and decay schemes, as well as the detailed nuclear properties and configuration assignments based on experimental data are presented for these nuclides. When there are insufficient data, expected values from systematics of nuclear properties and/or theoretical calculations are quoted. Unexpected or discrepant experimental results are also noted. Information provided in 244 U is tentative as it from the the possible production in the study of 1960 Di03 of debris of the first large-scale thermonuclear test (Ivy Mike) of November 1, 1952 in the Pacific Ocean. No new data are available for 244 Np and the information for g.s Jp is tentative. More experiment work is needed for 244 Np as theoretical work suggest an isomer with Jp=7- and g.s with Jp=2+. In 244Pu, a new K isomer was identified and in addition rotational bands built on the isomer have been observed via the deep inelastic excitation. In 244 Am, specifically in the (d,p)transfer reaction and in the (n,g ) secondary g ’s, there are a large number of gammas that are unplaced. Since its last measurement in 1966, the electron capture dataset has been updated with a tentative partial level scheme for 244 Cm which also provided a new half life measurement for 244 Bk. In 244 Fm, a fusion evaporation experiment measured the half life and provided upper limit for the SF, a and EC branching. A summary and compilation of the discovery of various isotopes in this mass region is given in 2013 Fr02 ( 244 Np, 244 Pu, 244 Am, 244 Cm, 244 Bk, and 244 Cf), 2011Me01 ( 244 Es), and 2013 Th02 ( 244 Fm). This work supersedes the 2003 evaluation by Y.A. Akovali( 2003Ak04).

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Nesaraja, C. D.. 2017-11-21. Nuclear Data Sheets for A=244. https://doi.org/10.1016/j.nds.2017.11.002

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Design-informed neutronics assessment of long-lived fission product transmutation in a tokamak fusion reactor blanket

This study presents a neutronics-based assessment of the feasibility and viability of transmuting six major long-lived fission products (LLFPs) from light-water reactors, namely 99 Tc, 129 I, 79 Se, 93 Zr, 126 Sn, and 135 Cs, within the blanket region of a tokamak fusion reactor, using the MIT ARC design as a concrete fusion configuration. Monte Carlo neutronics simulations were performed to evaluate LLFP transmutation and to compare the results with a reference boiling water reactor (BWR). The results indicate that transmutation of all six LLFPs is neutronics-feasible in fusion reactors, with transmutation half-lives significantly shorter than their natural decay half-lives. For elemental targets, transmutation of 135 Cs, 126 Sn, and 93 Zr was found potentially viable, as the net mass transmuted exceeded that achievable in the reference BWR under identical target volume and irradiation time. When isotopically separated targets were considered, transmutation of 126 Sn and 93 Zr appeared potentially viable. A parametric study demonstrated that plasma geometry modifications can enhance local neutron flux, increasing the transmuted 93 Zr mass by approximately 33% and reducing the transmutation half-life from approximately 240 years to 180 years. Repositioning the target and adjusting material layer thickness reduced the transmutation half-life of 93 Zr to 67 years and increased the net mass transmuted by a factor of 50. Furthermore, these results demonstrate that fusion reactors can enable LLFP transmutation beyond the practical limits of thermal fission reactors and highlight the critical role of reactor and blanket design optimization. Engineering and fuel-cycle considerations required for deployment are beyond the scope of this neutronics-focused study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A hybrid Monte Carlo-deterministic second moment method with efficient variance reduction

In this work, we present a hybrid method that combines Monte Carlo with deterministic finite element methods to solve a linear Boltzmann transport equation. Our hybrid method runs orders of magnitude faster than Monte Carlo, without sacrificing accuracy, for a proxy problem from radiative transfer that contains both optically-thick and optically-thin material. We believe that this is the first demonstration of a hybrid Second Moment Method in more than one spatial dimension, the first to consider more than one material, and the first to use variance reduction. Our variance reduction approach arises from an asymptotic analysis in which we show that the magnitude of the scattering source grows without bound. We transform the problem to compute the deviation of the radiation intensity from isotropy. The magnitude of the source in the transformed problem is bounded, and the quality of the hybrid method solution is dramatically improved by a substantial reduction in the variance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗