Addressing Model Form Error for Time-Dependent Conservation Equations

Abstract

Model form error of the type considered here is error due to an approximate or incorrect representation of physics by a computational model. Typical approaches to adjust a model based on observed differences between experiment and prediction are to calibrate the model parameters utilizing the observed discrepancies and to develop parameterized additive corrections to the model output. These approaches are generally not suitable if significant physics is missing from the model and the desired quantities of interest for an application are different than those used for calibration. The approach developed here is to build a corrected surrogate solver through a multi- step process: 1) Sampled simulation results are used to develop a surrogate computational solver that maintains the overall conservative principles of the unmodified governing equations, 2) the surrogate solver is applied to candidate linear and non-linear corrector terms to develop corrections that are consistent with the original conservative principles, 3) constant multipliers on the these terms are calibrated using the experimental observations, and 4) the resulting surrogate solver is used to predict application response for the quantity of interest. This approach and several other calibration-based approaches were applied to an example problem based on the diffusive Burgers' equation. While all the approaches provided some model correction when the measure/calibration quantity was the same as that for an application, only the present approach was able to adequately correct the CompSim results when the prediction quantity was different from the calibration quantity.