Search NASA⌕ Search

DOE OSTI · 1498708

WBS 4.1.2.31 Bioproduct Transition System Dynamics

Abstract

Bioproducts are chemicals derived from a biomass feedstock; they can be produced on their own or as co-products of a biorefinery that also produces biofuels. Bioproducts have historically been difficult to scale up and bring to market, despite a broad understanding developed within BETO of the various conversion processes that can be used to produce bioproducts. Expanding the bioproducts industry by bringing more bioproducts to market would have a variety of positive impacts. Growth in the bioproducts industry would support the biofuels industry by enabling biorefinery co-products that yield additional revenue streams, allowing biofuel selling prices to be reduced and expanding the biofuels market. A larger bioproducts industry also has the potential to reduce carbon and other emissions associated with the U.S. chemical sector and contribute to increased price stability in some areas of the chemical market by shifting portions of the chemical sector away from reliance on fossil feedstocks. The key barrier to realizing these positive impacts is a lack of knowledge around the factors that prevent or enable bioproducts to reach the commercial market. To date, there has been essentially no research done on how successful bioproducts (commercially produced bioproducts that have captured market share) become successful, why failed bioproducts fail, and what the similarities and differences are between successful and failed bioproducts. The current project addresses this knowledge gap with a decision support tool that can be used by investors, technology developers and government agencies to bring more bioproducts to market, thereby simultaneously growing the bioproducts and biofuels industries. Development of the decision support tool was based on research on the technology development process and success rates in analogous industries, data gathered during previous BETO-funded projects, and a series of interviews with subject-matter experts within BETO, the bioproducts industry, and the investment community. This information formed a knowledge base around how bioproducts are developed from applied research to commercial scale was assembled, which was used to build the Bioproduct Transition Dynamics (BTD) model, a system dynamics (SD) model that tracks bioproduct development projects from applied research through the 'valley of death' of piloting and demoing to commercial scale production. The end-of-project goal is to release the BTD, along with supporting documentation, as a transparent open-source model that will inform decisions around bioproduct development and investments and enable more bioproducts to reach the market. The BTD takes as inputs techno-economic data on specific bioproducts, behavioral parameters for developers and investors, expectations around government support, and exogenous market factors. Model outputs include bioproduct technological progress over time, a cash flow statement for the development project, and market share estimates. Following initial model development, a sensitivity analysis was performed on a subset of model inputs to determine, first, if the BTD could be used to answer analysis questions of interest to BETO, and second, which of the inputs considered were most influential on bioproduct success. Results indicate that the BTD can be used to identify scenarios that enable bioproduct development, and that 'soft' or semi-quantitative factors play a large role in determining if a bioproduct will reach the market. A workshop was also held for subject-matter experts and prospective BTD users in July 2018. The workshop covered BTD model logic, input data and assumptions as well as the sensitivity analysis results and a discussion of potential use cases. Workshop feedback was used to identify additional model development tasks and was incorporated into a draft technical report completed in September 2018. BTD model development, validation and application will continue through 2019.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Hanes, Rebecca J.. 2019-03-11. WBS 4.1.2.31 Bioproduct Transition System Dynamics. https://www.osti.gov/biblio/1498708

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Hydrotreating pine-derived catalytic fast pyrolysis oil to jet fuel: Process durability and impact of operating conditions

Hydrotreating woody biomass-derived catalytic fast pyrolysis (CFP) oil to jet fuel has the potential to enhance energy security due to the large abundance of forest and woody resources. CFP oil produced from pine over ZSM-5 was hydrotreated over sulfided NiMo/Al 2 O 3 for 410 h to study the impact of hydrotreating conditions (pressure, temperature, and weight hourly space velocity (WHSV)). The degree of deoxygenation remained high across the tested hydrotreating conditions, and the products contained < 0.01 wt% oxygen. Increasing hydrotreating pressure from 84 to 125 bar enhanced hydrogenation of aromatic rings and the formation of cycloalkanes and increasing the temperature from 385 to 400 degrees C enhanced cracking and the formation of jet-range molecules. Decreasing the weight hourly space velocity from 0.2 to 0.1 g/(g cat h) further enhanced cracking and led to higher gasoline- and lower jet fuel-range fractions. The highest jet fuel fraction (49 wt%) was obtained at 400 degrees C, 125 bar, 0.2 g/(g cat h) WHSV. CFP oils produced from pine over phosphorous-modified ZSM-5 were hydrotreated at this condition for 588 h to investigate the process durability. The hydrogenation performance of the catalyst gradually stabilized in approximately 300 h after which the product composition remained constant. Of the final hydrotreated CFP oil, 53 wt% fell in the jet fuel range with most of the tested fuel properties meeting ASTM D4054 and/or ASTM D7566 specifications. The freeze points were < -50 degrees C vs. guideline of < -40 degrees C and the viscosities at -20 degrees C were 3.8-4.1 mm 2 /s vs guideline of 8 mm 2 /s. Increasing the fraction of cycloalkanes could increase the cetane number and heating value, which did not meet the guidelines.

09 BIOMASS FUELS↗

Suppressing CO formation in low-temperature methanol steam reforming via Ce-modified CuZnGa layered oxide catalysts

Cu-based layered double hydroxides (LDHs) are widely recognized as effective catalysts for low-temperature methanol steam reforming, yet achieving high hydrogen productivity together with near-complete suppression of CO formation remains challenging. Here, we report the synthesis and evaluation of a series of CuZnGa LDH-derived catalysts and Ce-modified analogues prepared via an aqueous miscible organic method, which enables high metal dispersion and precise structural control. The optimized CuZnGa catalyst exhibits a hydrogen production rate of 16.9 µmol H 2 ·g cat −1 ·s −1 at 180 °C with an H 2 /CO ratio exceeding 3500, outperforming many state-of-the-art low-temperature systems. Importantly, the incorporation of small amounts of Ce further suppresses CO formation while maintaining high hydrogen productivity. Combined spectroscopic characterization and density functional theory calculations reveal that Ce is incorporated into the LDH lattice by substituting Ga 3+ sites up to a critical threshold, beyond which highly dispersed CeO x species are formed. These species provide mobile lattice oxygen that participates in a Mars-van Krevelen-type pathway, selectively oxidizing CO and suppressing the reverse water-gas shift reaction. This study establishes a clear relationship between Ce speciation, oxygen mobility, and catalytic selectivity in LDH-derived systems. The resulting catalysts demonstrate the potential of interface-engineered Cu-based materials for efficient low-temperature hydrogen production with minimal CO contamination.

09 BIOMASS FUELS↗

Graphitization of banana peel – synergistic effect of Ca and other elements of the biomass on carbon structure transformation

Recently, growing interest has been observed in using calcium as an effective catalyst for graphitizing disordered carbon materials derived from biomass and bioprecursors, such as cellulose and lignin, at relatively low tem peratures (<2000 °C). Herein, it is demonstrated that in the presence of elements such as calcium, silicon, sulfur, and potassium, which are abundant in banana peel composed of cellulose and lignin base, graphitization occurs much more effectively. The addition of external calcium source, in the form of calcium carbonate, to the banana peel-derived carbon and heat-treatment of the mixture under protective atmosphere up to 1750 °C results in a significant increase in the degree of the graphitization order and local formation of graphite crystals, whereas the same preparation and heat-treatment procedure applied to carbon material derived from pristine cellulose does not lead to such effective graphitization. It is indicated that the graphitization of banana peel carbon occurs due to the synergistic effect of the external Ca-based catalyst and the internal elements present in the raw biomass, supporting the transformation of the disordered graphene-like layers into graphitic structures. These findings are important for the future production of green graphite from biomass

09 BIOMASS FUELS↗