Advanced Reactor Siting Policy Considerations

Abstract

This report describes considerations for and challenges to revising the US Nuclear Regulatory Commission (NRC) guidance regarding population for siting an advanced reactor. Current regulations in 10 Code of Federal Regulations (CFR) Part 100, Reactor Site Criteria, and guidance support in Regulatory Guide (RG) 4.7, Revision 3, General Site Suitability Criteria for Nuclear Power Stations, are focused on large light water reactors (LWRs), addressing the distance that a nuclear reactor should be sited from a densely populated center. This report analyzes the alternatives to using a formula distance as the primary figure of merit for siting small modular reactors (SMRs) or non-light water reactors (non-LWRs). Some reactor vendors use a business plan that sites reactors close to an industrial partner to supply heat or to back-fit a reactor at a fossil plant site to take advantage of existing infrastructure. Factors such as smaller source terms (fission product release to the environment), passive safety systems, advances in barrier technology, advances in simulation and modeling, and improved understanding of societal risk may allow for siting these types of reactors closer to densely populated centers than has historically been accepted for large LWRs.