Search NASA⌕ Search

DOE OSTI · 1565749

Phagocyte-Inspired Smart Microcapsules

Abstract

According to the article, phagocytes protect the organism by ingesting harmful foreign particles and cells. We use mesoscale computer simulations to design a phagocyte-inspired active microcapsule that is capable of selectively capturing nanoparticles dispersed in solvent. Our fully synthetic microdevice is actuated by a temperature-sensitive microgel enclosed inside a perforated spherical shell. The shell pores are decorated with a copolymer brush that regulates the transport of solutes into the capsule interior. When exposed to an external stimulus, the microgel swells, expanding through the shell pores to make contact with the nanoparticle-rich solution surrounding the capsule. Upon removal of the external stimulus, the gel retracts back into the shell, bringing along with it captured nanoparticles. We probe how periodic application of the stimulus combined with nanoparticle-microgel adhesion enable selectivity and enhance capturing efficiency of our nature-inspired microdevice.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Nikolov, Svetoslav, Fernandez-Nieves, Alberto, Alexeev, Alexander. 2019-03-26. Phagocyte-Inspired Smart Microcapsules. https://doi.org/10.1021/acsmacrolett.8b00992

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Tensile Modeling PVC Gels for Electrohydraulic Actuators

Polyvinyl chloride (PVC)-dibutyl adipate (DBA) gels are a fascinating dielectric elastomer actuator showing promise in soft robotics. When actuated with high voltages, the gel deforms towards the anode. A recent application of PVC gels in electrohydraulic actuators motivates elastic and hyperelastic constitutive relationships for tensile loading modes. PVC gels with plasticizer-to-polymer weight ratios of 2:1, 4:1, 6:1, and 8:1 w/w were evaluated. PVC gels exhibit a linear elastic region up to 25% strain. The elastic modulus decreased with increasing plasticizer content from 288.8 kPa, 56.1 kPa, 24.7 kPa, to 11 kPa. Poisson’s ratio also decreased with increasing plasticizer content from 0.42, 0.43, 0.39, to 0.35. We suggest that the decrease in polymer concentration facilitates a weakly interconnected polymer network susceptible to chain slippage that hinders the network response, thus lowering Poisson’s ratio. Our work suggests that PVC gels can be treated as isotropic and incompressible for large strains and hyperelastic modeling; however, highly plasticized gels tend to act less incompressible at small strains. The power scaling law between the elastic modulus and plasticizer weight ratio showed high agreement, making the elastic modulus deterministic for any plasticizer content. The Neo–Hookean, Mooney–Rivlin, Yeoh, Gent, Ogden, and extended tube hyperelastic constitutive models are investigated. The Yeoh model shows the highest feasibility when evaluated up to 3.5 stretch, showing a maximum normalized root-mean-square-error of 6.85%. Together, these findings establish a constitutive basis for PVC-DBA gels, incorporating small strain elasticity, large strain non-linear behavior, and network analysis while providing suggestive insight into the network structure required for accurately modeling the EPIC.

Polymer Science↗