Search NASA⌕ Search

DOE OSTI · 1663874

Materials Data on HoAl3 by Materials Project

Abstract

HoAl3 crystallizes in the trigonal R-3m space group. The structure is three-dimensional. there are two inequivalent Ho sites. In the first Ho site, Ho is bonded to twelve Al atoms to form HoAl12 cuboctahedra that share corners with six equivalent HoAl12 cuboctahedra, edges with six equivalent AlHo4Al8 cuboctahedra, faces with six equivalent AlHo4Al8 cuboctahedra, and faces with eight equivalent HoAl12 cuboctahedra. There are six shorter (3.06 Å) and six longer (3.08 Å) Ho–Al bond lengths. In the second Ho site, Ho is bonded to twelve Al atoms to form HoAl12 cuboctahedra that share corners with six equivalent AlHo4Al8 cuboctahedra, corners with nine equivalent HoAl12 cuboctahedra, edges with six equivalent AlHo4Al8 cuboctahedra, faces with three equivalent AlHo4Al8 cuboctahedra, and faces with seven HoAl12 cuboctahedra. There are a spread of Ho–Al bond distances ranging from 3.02–3.09 Å. There are two inequivalent Al sites. In the first Al site, Al is bonded in a 10-coordinate geometry to four Ho and six Al atoms. There are a spread of Al–Al bond distances ranging from 2.73–2.88 Å. In the second Al site, Al is bonded to four Ho and eight Al atoms to form distorted AlHo4Al8 cuboctahedra that share corners with four equivalent HoAl12 cuboctahedra, corners with six equivalent AlHo4Al8 cuboctahedra, edges with four equivalent AlHo4Al8 cuboctahedra, edges with six HoAl12 cuboctahedra, faces with four HoAl12 cuboctahedra, and faces with four equivalent AlHo4Al8 cuboctahedra. All Al–Al bond lengths are 3.08 Å.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

2020-07-16. Materials Data on HoAl3 by Materials Project. https://doi.org/10.17188/1663874

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗