Search NASA⌕ Search

DOE OSTI · 1669492

Cathode Electrolyte Diagnostics Based on Scanning Probe Microscopy

Abstract

Various processes lead to degradation of cathodes in lithium-ion batteries. Questions remain regarding mechanisms of many of these processes. Probe microscopy methods including scanning electrochemical microscopy (SECM) are capable of directly probing processes at the cathode/electrolyte interface. SECM uses a small electrode to perform rapid electrochemical analysis of transient species generated at an active cathode/electrolyte interface. This paper discusses the background of the SECM instrument and its application to lithium-ion battery research. We also describe the application of SECM methods to the study of cathode degradation processes observed in lithium-ion batteries. Specifically, we focus on characterizing the dissolution of manganese from LiMn2O4 (LMO) based on recent debate in the literature. We describe experiments to observe and characterize the electrochemical properties of manganese complexes emerging from degrading LMO electrode materials.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Huang, Di, Engtrakul, Chaiwat (ORCID:0000000287730668), Nanayakkara, Sanjini, To, Bobby, He, Rong, Zhou, Meng, Luo, Hongmei, Tenent, Robert C. (ORCID:0000000291783762). 2020-05-20. Cathode Electrolyte Diagnostics Based on Scanning Probe Microscopy. https://doi.org/10.1117/12.2559415. https://searchnasa.com/record/osti%3A1669492/cathode-electrolyte-diagnostics-based-on-scanning-probe-microscopy

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Search NASA by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related reports

Effect of electrolyte composition on rock salt surface degradation in NMC cathodes during high-voltage potentiostatic holds

Surface degradation of lithium-ion cathodes at high voltages represents a significant barrier to increasing the useable energy of conventional cathodes. Though much work has been focused on mitigating the detrimental effects of such phenomena, the complex and correlated mechanisms involved have made progress difficult. Herein, the effect of electrolyte identity on surface degradation is examined. LiNi0.5Mn0.3Co0.2O2 (NMC532)/Li4Ti5O12 (LTO) full cells were constructed using three different electrolytes: a baseline organic carbonate electrolyte, a baseline organic carbonate electrolyte with an oxidizable additive, and a fluorinated carbonate electrolyte. Each system was subjected to a 60 h potentiostatic hold at 3.05 V (4.6 V vs. Li+/Li) and subsequently deconstructed for characterization via transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS). Molecular simulations were carried out on each distinct component of the three electrolytes in contact with crystal surfaces of an NMC532 particle. Results indicate an affinity for the additive-containing electrolyte to extract atomic oxygen from the cathode surface, whereas the fluorinated electrolyte components have negligible interactions. Hydrogen abstraction from the baseline electrolyte is facilitated by the NMC532 surface. TEM analysis of cathode surfaces, after the potentiostatic holds, revealed that the NMC532 particles cycled with the additive-containing electrolyte underwent significant surface degradation, including changes to local crystal structure in a region penetrating 20-40 nm from the surface; consistent with oxygen and lithium loss from the cathode material. However, the NMC532 in contact with the fluorinated electrolyte showed a disordered layer of just a few nm in thickness, similar to the depth of crystal disorder observed in pristine NMC532 primary particles. EELS data of the oxygen K-edge also indicated transition metal (TM) reduction, consistent with oxygen loss and changes in crystal structure extending into the cathode surface for each of the electrolytes surveyed. These surface reactions, including oxygen loss, are shown to correlate well with elevated oxidation currents and surface reconstructions of cathode particles.

cathode/electrolyte interface↗