Search NASA⌕ Search

DOE OSTI · 1700733

Materials Data on Pr3(GaNi)2 by Materials Project

Abstract

Pr3(NiGa)2 crystallizes in the orthorhombic Pbcm space group. The structure is three-dimensional. there are two inequivalent Pr sites. In the first Pr site, Pr is bonded in a 4-coordinate geometry to four equivalent Ni and five Ga atoms. There are a spread of Pr–Ni bond distances ranging from 2.83–3.32 Å. There are a spread of Pr–Ga bond distances ranging from 3.12–3.45 Å. In the second Pr site, Pr is bonded in a 9-coordinate geometry to four equivalent Ni and five Ga atoms. There are two shorter (3.14 Å) and two longer (3.16 Å) Pr–Ni bond lengths. There are a spread of Pr–Ga bond distances ranging from 3.08–3.21 Å. Ni is bonded in a 10-coordinate geometry to six Pr, one Ni, and three Ga atoms. The Ni–Ni bond length is 2.70 Å. There are one shorter (2.52 Å) and two longer (2.60 Å) Ni–Ga bond lengths. There are two inequivalent Ga sites. In the first Ga site, Ga is bonded in a 9-coordinate geometry to seven Pr and two equivalent Ni atoms. In the second Ga site, Ga is bonded to eight Pr and four equivalent Ni atoms to form a mixture of distorted face, edge, and corner-sharing GaPr8Ni4 cuboctahedra.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

2020-05-03. Materials Data on Pr3(GaNi)2 by Materials Project. https://doi.org/10.17188/1700733

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗