Search NASA⌕ Search

DOE OSTI · 1745870

Materials Data on K2NdCl5 by Materials Project

Abstract

K2NdCl5 crystallizes in the orthorhombic Pnma space group. The structure is three-dimensional. K1+ is bonded in a 8-coordinate geometry to eight Cl1- atoms. There are a spread of K–Cl bond distances ranging from 3.21–3.46 Å. Nd3+ is bonded to seven Cl1- atoms to form distorted edge-sharing NdCl7 pentagonal bipyramids. There are a spread of Nd–Cl bond distances ranging from 2.79–2.87 Å. There are four inequivalent Cl1- sites. In the first Cl1- site, Cl1- is bonded to four equivalent K1+ and one Nd3+ atom to form distorted ClK4Nd trigonal bipyramids that share corners with four equivalent ClK2Nd2 tetrahedra, corners with eight ClK4Nd trigonal bipyramids, edges with four equivalent ClK2Nd2 tetrahedra, an edgeedge with one ClK4Nd trigonal bipyramid, and a faceface with one ClK4Nd trigonal bipyramid. In the second Cl1- site, Cl1- is bonded in a 5-coordinate geometry to four equivalent K1+ and one Nd3+ atom. In the third Cl1- site, Cl1- is bonded to four equivalent K1+ and one Nd3+ atom to form distorted ClK4Nd trigonal bipyramids that share corners with eight equivalent ClK2Nd2 tetrahedra, corners with four equivalent ClK4Nd trigonal bipyramids, edges with two equivalent ClK2Nd2 tetrahedra, edges with three ClK4Nd trigonal bipyramids, and a faceface with one ClK4Nd trigonal bipyramid. In the fourth Cl1- site, Cl1- is bonded to two equivalent K1+ and two equivalent Nd3+ atoms to form distorted ClK2Nd2 tetrahedra that share corners with six equivalent ClK2Nd2 tetrahedra, corners with six ClK4Nd trigonal bipyramids, an edgeedge with one ClK2Nd2 tetrahedra, and edges with three ClK4Nd trigonal bipyramids.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

2020-05-01. Materials Data on K2NdCl5 by Materials Project. https://doi.org/10.17188/1745870

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗