Search NASA⌕ Search

DOE OSTI · 1758409

Materials Data on Al9Co2Ni by Materials Project

Abstract

Co2NiAl9 crystallizes in the orthorhombic Immm space group. The structure is three-dimensional. there are three inequivalent Co sites. In the first Co site, Co is bonded in a 9-coordinate geometry to nine Al atoms. There are a spread of Co–Al bond distances ranging from 2.37–2.52 Å. In the second Co site, Co is bonded in a 9-coordinate geometry to nine Al atoms. There are a spread of Co–Al bond distances ranging from 2.35–2.61 Å. In the third Co site, Co is bonded in a 10-coordinate geometry to ten Al atoms. There are a spread of Co–Al bond distances ranging from 2.50–2.63 Å. Ni is bonded in a 9-coordinate geometry to nine Al atoms. There are a spread of Ni–Al bond distances ranging from 2.32–2.63 Å. There are ten inequivalent Al sites. In the first Al site, Al is bonded in a 12-coordinate geometry to four Co atoms. In the second Al site, Al is bonded in a 3-coordinate geometry to three Co and three Al atoms. There are one shorter (2.50 Å) and two longer (2.64 Å) Al–Al bond lengths. In the third Al site, Al is bonded in a 3-coordinate geometry to one Co, two equivalent Ni, and one Al atom. The Al–Al bond length is 2.83 Å. In the fourth Al site, Al is bonded in a bent 150 degrees geometry to two equivalent Ni atoms. In the fifth Al site, Al is bonded in a 4-coordinate geometry to three Co, one Ni, and seven Al atoms. All Al–Al bond lengths are 2.67 Å. In the sixth Al site, Al is bonded in a 3-coordinate geometry to two equivalent Co, one Ni, and one Al atom. The Al–Al bond length is 2.88 Å. In the seventh Al site, Al is bonded in a linear geometry to two equivalent Co atoms. In the eighth Al site, Al is bonded in a 3-coordinate geometry to two Co, one Ni, and one Al atom. In the ninth Al site, Al is bonded in a 3-coordinate geometry to three Co atoms. In the tenth Al site, Al is bonded in a 12-coordinate geometry to four equivalent Co and eight Al atoms.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

2020-09-03. Materials Data on Al9Co2Ni by Materials Project. https://doi.org/10.17188/1758409

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗