Search NASA⌕ Search
Home/Archive/DOE OSTI

DOE OSTI · 1813647

Bryan Mound Abandoned Cavern 3 Stability Analysis - 2021 Review

Lord, Anna S.·Moriarty, Dylan M.·Sobolik, Steven R.
View original source ↗Read source document ↗Export metadata ↓

Abstract

The U.S. Strategic Petroleum Reserve is moving towards employing an expanded enhanced monitoring program. In doing so it has become apparent that there is a need for a better project wide understanding of the current state of Bryan Mound abandoned Cavern 3 stability. Cavern 3 has been inaccessible since 1988 when it was plugged and abandoned and thus this comprehensive report is structured by focusing on 1) a summarization of what can be discerned from historical records prior to 1988 and 2) a presentation and discussion of our current understanding of Cavern 3 based solely on surface monitoring and geomechanical analyses. Historical literature state the cavern was deemed unsuitable for oil storage, as it could not be definitively determined if fluid pressure could be maintained in the borehole. Current surface monitoring indicates the largest surface subsidence rates are occurring above Cavern 3. The subsidence rates are linear with no evidence of acceleration. Cavern collapse could occur if there is insufficient pressure holding up the roof. Next steps are to implement a microseismic system that will lend to a better understanding of cavern stability, as well as provide an improved early warning system for loss of integrity.

Explore related subjects

02 PETROLEUM58 GEOSCIENCES

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Lord, Anna S., Moriarty, Dylan M., Sobolik, Steven R.. 2021-06-01. Bryan Mound Abandoned Cavern 3 Stability Analysis - 2021 Review. https://doi.org/10.2172/1813647

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2026

Carbon Capture and Utilization for Protein and Fatty Acids

The unlimited release version of the final report for the "Carbon Capture and Utilization for Protein and Fatty Acids" project. This project advanced an integrated open raceway algae cultivation and processing system to engineering scale for carbon capture and utilization (CCU) from the flue gas of a naphtha-fired power plant.

02 PETROLEUM↗
DOE OSTI2026

Oil in Alaska North Slope Gas Hydrate Reservoir: Micro-CT and Flow Simulation Insights into Permeability

Gas hydrate-bearing sands on the Alaska North Slope (ANS) host minor volumes of crude oil whose impact on formation permeability has never been quantified relative to a gas hydrate reservoir system. Here, we combine in situ pressure-core microcomputed-tomography (μ-CT), thermogravimetric analysis (TGA), gas-chromatography–mass-spectrometry (GC–MS), scanning-electron microscopy coupled with energy-dispersive spectroscopy (SEM-EDS), and Stokes-flow simulation to (i) quantify oil saturation, (ii) infer its source, and (iii) evaluate its influence on permeability after gas-hydrate dissociation. μ-CT and SEM-EDS imaging identify the host sediment as silty, with some grain-coating clay present. Eight representative 3003-voxel subvolumes extracted from a preserved pressure core (Core 15P-3c, from the B1 sand (unit B), HYDRATE 02 Geo Data Well (GDW), 886.96–887.29 m measured depth, MD) exhibit porosities of 0.34–0.37 and an average oil saturation of 0.09 ± 0.03, in comparison to an independent TGA-based estimate of 0.16. GC-MS fingerprints obtained from an adjacent depressurized core (Core 17P-1, 891.37–891.44 m MD), together with oil pore habit revealed by μ-CT, suggest that the oil is partly native but also includes contributions from mineral oil-based drilling fluid contamination. Further analysis of oil–porewater interactions and flushing tests confirms that native oil saturation in the analyzed samples ranges from 0.04 to 0.08 with an average of approximately 0.06, and the oil is highly immobile. Flow simulations demonstrate that the native oil saturation of ≈0.06 reduces permeability by approximately 50% due to both pore blockage and increased flow-path tortuosity. These findings reveal the potential presence of native oil within the ANS gas hydrate reservoir and suggest that future simulation models may need to account for its impact on permeability to improve long-term performance predictions of gas and water production.

02 PETROLEUM↗
DOE OSTI2026

Quantum Enhanced Fiber Sensing for Oil and Gas Applications (Final Technical Report)

The major goal of the project was to develop a quantum sensing approach compatible with current infrastructure in the oil and gas industry that could provide a quantum enhancement, with a focus towards pipeline leak detection. The proposed approach to achieving this goal consisted of the use of quantum states of light to enhance the sensitivity of fiber optic sensors beyond the classical limit. To address the limitations of existing commercial leak detection, the project focused on the study of two technologies: distributed acoustic sensors (DAS) and fiber Bragg grating (FBG)-based sensors. The initial phase of the project centered around the identification and mitigation of dominant sources of classical noise to enable operation at the classical shot noise limit (SNL). The second phase focused on the use of quantum resources to obtain sensitivities beyond the classical SNL. The final phase sought to combine quantum noise reduction techniques with advanced dynamical classical noise cancelation approaches.

02 PETROLEUM↗