Search NASA⌕ Search

DOE OSTI · 1844241

Nuclear Data Sheets for A=233

Abstract

The present evaluation of the known A=233 nuclides ( 233 Fr, 233 Ra, 233 Ac, 233 Th, 233 Pa, 233 U, 233 Np, 233 Pu, 233 Am, 233 Cm) and 233 Bk represents an update and revision, after 15 years of the previous evaluation of A=233 published by B. Singh and J.K. Tuli (2005Si15). Laboratory identification of 233 Bk nuclide is still considered as tentative. Various decay and reaction data are evaluated and compared. Adopted data, levels, gammas, level half-lives, spins, parities, and configuration assignments are provided. For 233 Fr, 233 Ra, 233 Ac, 233 Pu, 233 Am and 233 Cm, information is available for the respective ground states only. The decay schemes from β - decays of 233 Fr and 233 Ra, and from ε decay of 233 Am and 233 Cm are unknown, while those from β - decay of 233 Ac, and from ε decay of 233 Np are considered incomplete. The α decay of 237 Np to 233 Pa has been studied in detail by many investigators, yet the decay scheme is considered incomplete as several very low-energy transitions are involved, without the knowledge of their intensities, resulting in mismatch of directly measured α feedings and those deduced from γ-transition intensity balances. The decay schemes from α decays of 237 Am, 237 Cm and 237 Cf to respective A=233 daughters are considered incomplete. Particle-transfer and high-spin data are available for 233 Th, 233 Pa and 233 U nuclei, which remain the most extensively studied in this mass chain. However, data for half-lives for the excited states are available only for one level in 233 Pa, and for five levels in 233 U, thus limiting the knowledge of reduced transition probabilities in this mass chain.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Singh, Balraj, Tuli, Jagdish K., Browne, Edgardo. 2020-12-01. Nuclear Data Sheets for A=233. https://doi.org/10.1016/j.nds.2020.11.002

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Design-informed neutronics assessment of long-lived fission product transmutation in a tokamak fusion reactor blanket

This study presents a neutronics-based assessment of the feasibility and viability of transmuting six major long-lived fission products (LLFPs) from light-water reactors, namely 99 Tc, 129 I, 79 Se, 93 Zr, 126 Sn, and 135 Cs, within the blanket region of a tokamak fusion reactor, using the MIT ARC design as a concrete fusion configuration. Monte Carlo neutronics simulations were performed to evaluate LLFP transmutation and to compare the results with a reference boiling water reactor (BWR). The results indicate that transmutation of all six LLFPs is neutronics-feasible in fusion reactors, with transmutation half-lives significantly shorter than their natural decay half-lives. For elemental targets, transmutation of 135 Cs, 126 Sn, and 93 Zr was found potentially viable, as the net mass transmuted exceeded that achievable in the reference BWR under identical target volume and irradiation time. When isotopically separated targets were considered, transmutation of 126 Sn and 93 Zr appeared potentially viable. A parametric study demonstrated that plasma geometry modifications can enhance local neutron flux, increasing the transmuted 93 Zr mass by approximately 33% and reducing the transmutation half-life from approximately 240 years to 180 years. Repositioning the target and adjusting material layer thickness reduced the transmutation half-life of 93 Zr to 67 years and increased the net mass transmuted by a factor of 50. Furthermore, these results demonstrate that fusion reactors can enable LLFP transmutation beyond the practical limits of thermal fission reactors and highlight the critical role of reactor and blanket design optimization. Engineering and fuel-cycle considerations required for deployment are beyond the scope of this neutronics-focused study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A hybrid Monte Carlo-deterministic second moment method with efficient variance reduction

In this work, we present a hybrid method that combines Monte Carlo with deterministic finite element methods to solve a linear Boltzmann transport equation. Our hybrid method runs orders of magnitude faster than Monte Carlo, without sacrificing accuracy, for a proxy problem from radiative transfer that contains both optically-thick and optically-thin material. We believe that this is the first demonstration of a hybrid Second Moment Method in more than one spatial dimension, the first to consider more than one material, and the first to use variance reduction. Our variance reduction approach arises from an asymptotic analysis in which we show that the magnitude of the scattering source grows without bound. We transform the problem to compute the deviation of the radiation intensity from isotropy. The magnitude of the source in the transformed problem is bounded, and the quality of the hybrid method solution is dramatically improved by a substantial reduction in the variance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗