Search NASA⌕ Search

DOE OSTI · 1845101

Viscosity-temperature relation based on the evolution of medium-range structures of silica

Abstract

The viscosity of glass is the most important technological property to glass manufactures and various applications. Practically, finding an accurate equation to express the glass viscosity behavior in the entire glass transition temperature range is tremendously challenge because it spans more than ten orders of magnitude. After a brief review of existing empirical viscosity equations, this work focuses on the correlating silica viscosity behavior with the evolution of glass medium-range structure, based on the recently proposed nanoflake model. From this new model, a new equation is constructed, which correctly describes the Arrhenius-type behavior of silica viscosity η above the melting temperature Tm, and non-Arrhenius-type behavior from Tm to a critical temperature Tc. At temperature lower than Tc, the equation predicts Arrhenius-type behavior again for the viscous flow with increased activation energy. The new equation agrees with experimental data in the entire temperature spanned from extremely high to extremely low. Furthermore, the application of the new equation is shown to extend to sodium silicate glasses as well.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Cheng, Shangcong. 2020-12-04. Viscosity-temperature relation based on the evolution of medium-range structures of silica. https://doi.org/10.1016/j.jnoncrysol.2020.120582

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗