Search NASA⌕ Search
Home/Archive/DOE OSTI

DOE OSTI · 1852465

Physically Based Modeling of PEMFC Cathode Catalyst Layers: Effective Microstructure and Ionomer Structure–Property Relationship Impacts

Randall, Corey R.·DeCaluwe, Steven C.
View original source ↗Export metadata ↓

Abstract

Abstract This work presents a pseudo-two-dimensional proton exchange membrane fuel cell (PEMFC) model incorporating Nafion ionomer structure–property relationships in the cathode catalyst layer (CL) to capture and explain losses at low Pt loading. Structural data from neutron reflectometry and thin film Nafion conductivity measurements predict variations in the oxygen diffusion coefficient and ionic conductivity with changing CL ionomer thickness and Pt loading. By including these structure–property relationships, predicted polarization curves agree closely with previously published experimental data from cells with Pt loadings between 0.025 and 0.2 mg/cm2. Results demonstrate that structure–property relationships based on physically measurable ionomer and CL properties provide a feasible interpretation of PEMFC CL phenomena for a range of Pt loadings and help explain previously unaccounted-for losses at low Pt. Results also show that simulations must account for surface species coverage variations in order to properly capture the kinetic losses. Finally, results suggest that an increase in ionomer thickness surrounding the C/Pt surfaces may lead to improved cell performance due to improved ionic conductivity.

Explore related subjects

ElectrochemistryEnergy & Fuels

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Randall, Corey R., DeCaluwe, Steven C.. 2020-04-01. Physically Based Modeling of PEMFC Cathode Catalyst Layers: Effective Microstructure and Ionomer Structure–Property Relationship Impacts. https://doi.org/10.1115/1.4046417

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

NASA NTRS2026

Mathematical Model of a Regenerative Fuel Cell for System Optimization

This thesis developed a system-level optimization model of a regenerative fuel cell (RFC) system for long-duration, off-world energy storage applications. Prior RFC design studies have typically been limited to reduced parameter sets and simplified constraints due to computational limitations relative to the number of relevant degrees of freedom. As a result, important nonlinear interactions between subsystems have not been fully captured. This work began to address that gap by developing a higher-fidelity, nonlinear optimization framework that incorporates a broader set of design variables and coupled constraints, enabling a multidimensional model that captures the coupled behavior of RFC subsystems and demonstrates the feasibility of applying optimization to such systems. An expanded system-level optimization approach was established that captures interactions between electrochemical performance, structural requirements, and storage design. This enabled a more comprehensive evaluation of trade-offs than conventional formulations. The model integrates four coupled subsystems: a fuel cell, an electrolyzer, reactant gas, and high-pressure storage tanks, and was formulated to accommodate a wide range of mission parameters, including operational time and required output power. It incorporates constraints on available solar array power, reactant mass balance between production and consumption, and pressure-dependent storage requirements. To enable reliable convergence, the optimization problem was reformulated to reduce dimensionality and improve numerical stability, with subsystem models organized for efficient evaluation. Problem dimensionality was reduced by consolidating lower-level design variables into higher-level representative quantities, and subsystem behavior was evaluated within the optimization loop. A multi-start initialization strategy was employed to mitigate sensitivity to local minima and improve solution quality, while nonlinear relationships were solved using robust numerical methods. The results showed that convergence was achieved across a range of required output power values. Specific energy reached a maximum at a critical mission power level, where the electrolyzer power matched the available solar input and operated near its voltage and current density limits. Beyond this point, further increases in required power resulted in less mass-efficient operation, increasing total system mass and reducing overall performance. The developed model represents an advancement in RFC system-level optimization by enabling analysis of a broader and more tightly coupled design space than previous considerations. While convergence behavior and computational cost remain challenges, the methods introduced improve solvability and allow inclusion of additional design variables with minimal loss of physical fidelity. However, the numerical results should not be interpreted as definitive design recommendations, as the model includes simplifying assumptions and omits several higher-order effects. Future work should extend this framework by incorporating additional subsystems and loss mechanisms, such as thermal management, parasitic power consumption, and reactant losses, to improve fidelity and ensure more representative design conclusions.

Electrochemistry↗
DOE OSTI2026

Electronic origin of reorganization energy in interfacial electron transfer

Electron transfer (ET) reactions underpin energy conversion and chemical transformations in both biological and a biological systems. The efficiency of any ET process relies on achieving a desired ET rate within an optimal driving force range. Marcus theory provides a microscopic framework for understanding the activation free energy—and therefore the rate—of ET in terms of a key parameter: the reorganization energy. For electrified solid–liquid interfaces, it has long been conventionally understood that only factors in the electrolyte phase are responsible for determining the reorganization energy and that the electronic density of states (DOS) of the electrode only serves to dictate the number of thermally accessible channels for ET. Here we show instead that the electrode DOS plays a central role in governing the reorganization energy, far outweighing its conventionally assumed role. Using atomically layered heterostructures, we tune the DOS of graphene and measure outer-sphere ET kinetics. We find the ensuing variation in ET rate arises from strong modulation in a reorganization energy associated with image potential localization in the electrode. Here we redefine the traditional paradigm of heterogeneous ET kinetics, revealing a deeper role of the electrode electronic structure in interfacial reactivity.

Electrochemistry↗
DOE OSTI2026

Tetrahedral Zn 2+ doping LiNi 0.6 Mn 0.2 Co 0.2 O 2 improves discharge capacity retention by altering surface Ni valence during cycling and preventing oxygen evolution

5 mol-% Zn 2+ was added to the co-precipitation synthesis of LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) to understand Zn's effect on the structural and electronic properties of NMC622. Zn is determined to successfully dope into the NMC crystal lattice as there is an increase in d-spacing along the [003], [104], and [110] directions and an increase in molar volume (100.75 cm 3 mol -1 for NMC622 and 101.00 cm 3 mol -1 for Zn-NMC). Through XPS, Zn is determined to dope on the tetrahedral 6c Wyckoff site in the NMC structure and TEM-EDS reveals that despite a slight ZnO impurity phase, 1.4 mol-% Zn successfully dopes into the crystal structure. Furthermore, cyclic voltammetry shows a suppressed anodic wave associated with oxygen evolution and EIS demonstrates that Zn-doped NMC decreases charge transfer resistance and increases Li diffusion by an order of magnitude. After the formation cycles, NMC has a higher 1 C accessible capacity, 141 mAh/g, over Zn-NMC (132 mAh/g), but after long term cycling Zn-NMC has a higher accessible capacity (117 mAh/g compared to 96 mAh/g for NMC) and increases discharge capacity retention by 18% leading to longer cycle life.

Electrochemistry↗