Search NASA⌕ Search

DOE OSTI · 1899230

Identification of Grand-design and Flocculent spirals from SDSS using deep convolutional neural network

Abstract

ABSTRACT Spiral galaxies can be classified into the Grand-designs and Flocculents based on the nature of their spiral arms. The Grand-designs exhibit almost continuous and high contrast spiral arms and are believed to be driven by stationary density waves, while the Flocculents have patchy and low-contrast spiral features and are primarily stochastic in origin. We train a deep convolutional neural network model to classify spirals into Grand-designs and Flocculents, with a testing accuracy of $\mathrm{97.2{{\ \rm per\ cent}}}$. We then use the above model for classifying 1354 spirals from the SDSS. Out of these, 721 were identified as Flocculents, and the rest as Grand-designs. Interestingly, we find the mean asymptotic rotational velocities of our newly classified Grand-designs and Flocculents are 218 ± 86 and 146 ± 67 km s−1, respectively, indicating that the Grand-designs are mostly the high-mass and the Flocculents the intermediate-mass spirals. This is further corroborated by the observation that the mean morphological indices of the Grand-designs and Flocculents are 2.6 ± 1.8 and 4.7 ± 1.9, respectively, implying that the Flocculents primarily consist of a late-type galaxy population in contrast to the Grand-designs. Finally, an almost equal fraction of bars ∼0.3 in both the classes of spiral galaxies reveals that the presence of a bar component does not regulate the type of spiral arm hosted by a galaxy. Our results may have important implications for formation and evolution of spiral arms in galaxies.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sarkar, Suman (ORCID:0000000254653467), Narayanan, Ganesh, Banerjee, Arunima, Prakash, Prem. 2022-10-27. Identification of Grand-design and Flocculent spirals from SDSS using deep convolutional neural network. https://doi.org/10.1093/mnras%2Fstac3096

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Reflection grating fabrication for the Rockets for Extended-source X-ray Spectroscopy

Abstract The Rockets for Extended-source X-ray Spectroscopy (tREXS) grating spectrograph uses modules of reflection gratings to collect spectroscopic data from extended astronomical sources of soft X-rays. Two blazed master gratings were produced on silicon substrates with electron-beam lithography (EBL) and complementary nanofabrication processes that include KOH etching. Substrate-conformal imprint lithography (SCIL) was then used to create 191 replicas of the two grating masters for use in the flight instrument. Diffraction efficiency was measured for several replica gratings, which achieve a peak of$$ \varvec{>} $$ > 70% absolute efficiency near 0.22 keV and an average of$$ \varvec{\approx } $$ ≈ 50% absolute efficiency across the measured band, from 0.18 – 0.8 keV. Here we detail the nanofabrication of the grating masters, including the EBL parameters and tREXS-specific fabrication considerations, and the SCIL replication process used to generate the final instrument gratings. A discussion of grating characterization and areas for future improvement is also presented.

Astronomy & Astrophysics↗

Diffuse boosted cosmic neutrino background

Energetic cosmic rays scatter off the cosmic neutrino background throughout the history of the Universe, yielding a diffuse flux of cosmic relic neutrinos boosted to high energies. We calculate this flux under different assumptions of the cosmic-ray flux spectral slope and redshift evolution. The nonobservation of the diffuse flux of boosted relic neutrinos with current high-energy neutrino experiments already excludes an average cosmic neutrino background overdensity larger than ∼10 4 over cosmological distances. We discuss the future detectability of the diffuse flux of boosted relic neutrinos in light of neutrino overdensity estimates and cosmogenic neutrino backgrounds.

Astronomy & Astrophysics↗

SUDA: A SUrface Dust Analyser for Compositional Mapping of the Galilean Moon Europa

Abstract The Surface Dust Analyser (SUDA) is a mass spectrometer onboard the Europa Clipper mission for investigating the surface composition of the Galilean moon Europa. Atmosphereless planetary moons such as the Galilean satellites are wrapped into a ballistic dust exosphere populated by tiny samples from the moon’s surface produced by impacts of fast micrometeoroids. SUDA will measure the composition of such surface ejecta during close flybys of Europa to obtain key chemical signatures for revealing the satellite’s composition such as organic molecules and salts, history, and geological evolution. Because of their ballistic orbits, detected ejecta can be traced back to the surface with a spatial resolution roughly equal to the instantaneous altitude of the spacecraft. SUDA is a Time-Of-Flight (TOF), reflectron-type impact mass spectrometer, optimized for a high mass resolution which only weakly depends on the impact location. The instrument will measure the mass, speed, charge, elemental, molecular, and isotopic composition of impacting grains. The instrument’s small size of$268 ~\mathrm {mm} \times 250 ~\mathrm {mm} \times 171$ 268 mm × 250 mm × 171 $~\mathrm {mm}$ mm , radiation-hard design, and rather large sensitive area of 220 cm 2 matches well the challenging demands of the Clipper mission.

Astronomy & Astrophysics↗