Search NASA⌕ Search

DOE OSTI · 1924661

Enhanced Geothermal Shot Analysis for the Geothermal Technologies Office: Preprint

Abstract

In 2021, the U.S. Department of Energy (DOE) began the Energy Earthshots initiatives to accelerate breakthroughs of reliable clean energy solutions within the next 10 years. In 2022, the National Renewable Energy Laboratory (NREL) was asked by the DOE Geothermal Technologies Office (GTO) to provide analysis for developing Energy Earthshot targets for Enhanced Geothermal Systems (EGS), human-made underground reservoirs that extract thermal energy from the earth for electricity generation and/or heating applications. The Enhanced Geothermal Shot analysis is based on the technology assumptions in the 2019 GTO report GeoVision: Harnessing the Heat Beneath Our Feet. For Earthshot, we updated some of the technology cost and performance assumptions based on recent technology advances and updated the EGS resource potential to include more detailed analysis. We used the updated EGS supply cost curves to forecast the amount of geothermal electricity generation that could be deployed in the US by 2050 using a capacity expansion model. The results were used to develop a cost target for EGS. On September 8th, 2022, the Enhanced Geothermal Shot was announced. Its target - reduce the cost of EGS by 90%, to $45 per megawatt hour by 2035. This paper summarizes the cost and resource assumptions used in the Enhanced Geothermal Shot. It describes the assumptions used in the Regional Energy Deployment System (ReEDS) capacity expansion model to forecast geothermal deployment and discusses the results.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Augustine, Chad (ORCID:0000000297981719), Fisher, Sarah, Ho, Jonathan (ORCID:0000000342606986), Warren, Ian, Witter, Erik (ORCID:0000000258592569). 2023-02-09. Enhanced Geothermal Shot Analysis for the Geothermal Technologies Office: Preprint. https://www.osti.gov/biblio/1924661

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Dynamics modeling of molten salt reactor with reduced and expanded representations of delayed neutron precursors

Molten salt reactors (MSRs) present unique challenges in dynamic behavior due to the mobility of their fuel. In these reactors, delayed neutron precursors (DNPs) drift with the fuel circulation through the primary loop. As a result, a fraction of DNPs decays outside the core, effectively reducing the available delayed neutron population for reactivity control. Consequently, precise modeling of the distribution and behavior of DNPs is critical for accurate reactor dynamics simulations. In this study, the System Dynamics Analysis Tool (SDAT) was used to simulate a thermal-spectrum MSR under steady-state conditions and following transients. The effects of using reduced and expanded representations of DNPs with fewer or more groups than the conventional 6-group model were investigated. Their impact on the simulated distribution of precursors in the primary loop, reactivity loss value, and reactor response to transients was analyzed. Simulation results showed that reduced models lead to the loss of the actual DNPs distribution data, resulting in less accurate estimates of reactivity loss. Reactor power predictions using these reduced models showed significant deviations compared to those using the conventional 6-group model in transient simulations. Expanded models offered a more accurate representation of the distribution of DNPs and reactivity loss estimates. Reactor power predictions using expanded models showed minimal deviation from the conventional 6-group model during the simulated transients.

analysis↗

A Primer on Using Analysis to Guide Plastic Circularity

BOTTLE, funded by DOE's Advanced Materials & Manufacturing Technologies Office and Bioenergy Technologies Office (BETO), conducts analysis-guided R&D to change the way we recycle plastics. But what does analysis really mean? In this webinar, BOTTLE Analysis Co-Lead Dr. Taylor Uekert, a researcher with the National Renewable Energy Laboratory (NREL), will introduce key analysis techniques such as techno-economic analysis, life cycle assessment, and environmental justice evaluation. Relevant to both analysts and non-analysts, Dr. Uekert will cover the basics of analysis techniques and discuss how these methods are conducted and interpreted. She will provide examples from the BOTTLE portfolio demonstrating their use in benchmarking and optimizing the costs and environmental impacts of new innovations in plastic redesign and recycling. If you are working in the plastics recycling field - from experimental work to analysis to community-focused projects - you won't want to miss this talk. The webinar will end with a Q&A session.

analysis↗