Search NASA⌕ Search
Home/Archive/DOE OSTI

DOE OSTI · 1973198

Many-body expansion for light nuclear systems

Depastas, Theodore·Souliotis, George A.·Tzeli, Demeter·Xantheas, Sotiris S.
View original source ↗Read source document ↗Export metadata ↓

Abstract

Here we extend the many-body expansion (MBE), previously applied to hydrogen bonded and molecular systems, to the light nuclear systems 3 H and 3 He by considering the nucleonic degrees of freedom as fundamental in the expansion. The analysis is based on the Pauli nucleonic dynamics (PND) model, a simple antisymmetrized dynamical code, inspired by the sophisticated constrained molecular dynamics (CoMD) model. The total energy of the 2 H nucleus is calculated with this model at -2.312 MeV, which is within 4% of the experimental value of -2.225 MeV. The application of the MBE yields results for the three-body term in the 3 H nucleus that is comparable with previous estimates, while it is reported for the first time for the nucleus of 3 He . The energies of 3 H and 3 He that include the sum of the one- and two-body terms with the model are - 6.97 ± 0.21 MeV and - 6.19 ± 0.21 MeV and the three-body terms, estimated from the difference of the sum of the one- and two-body terms from the experimentally measured energies, are -1.51 ± 0.21 MeV and -1.53 ± 0.21 MeV, respectively. The MBE for the 3 H and 3 He nuclei is qualitatively similar to the one previously reported for the water trimer: the two- and three-body terms are negative with the latter amounting to ~3% of the former. Additionally, the three-body terms correspond to about 16–23% of the total energy of the bound systems, a percentage that is also comparable to the one in the water trimer (17%). In this manner, the MBE analysis can be applied to light nuclear systems following the same protocol as the one that has been previously extensively used for hydrogen bonded molecular systems.

Explore related subjects

73 NUCLEAR PHYSICS AND RADIATION PHYSICSfew-body systemsmany-body techniquesnuclear many-body theory

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Depastas, Theodore, Souliotis, George A., Tzeli, Demeter, Xantheas, Sotiris S.. 2023-04-18. Many-body expansion for light nuclear systems. https://doi.org/10.1103/physrevc.107.044004

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2026

Design-informed neutronics assessment of long-lived fission product transmutation in a tokamak fusion reactor blanket

This study presents a neutronics-based assessment of the feasibility and viability of transmuting six major long-lived fission products (LLFPs) from light-water reactors, namely 99 Tc, 129 I, 79 Se, 93 Zr, 126 Sn, and 135 Cs, within the blanket region of a tokamak fusion reactor, using the MIT ARC design as a concrete fusion configuration. Monte Carlo neutronics simulations were performed to evaluate LLFP transmutation and to compare the results with a reference boiling water reactor (BWR). The results indicate that transmutation of all six LLFPs is neutronics-feasible in fusion reactors, with transmutation half-lives significantly shorter than their natural decay half-lives. For elemental targets, transmutation of 135 Cs, 126 Sn, and 93 Zr was found potentially viable, as the net mass transmuted exceeded that achievable in the reference BWR under identical target volume and irradiation time. When isotopically separated targets were considered, transmutation of 126 Sn and 93 Zr appeared potentially viable. A parametric study demonstrated that plasma geometry modifications can enhance local neutron flux, increasing the transmuted 93 Zr mass by approximately 33% and reducing the transmutation half-life from approximately 240 years to 180 years. Repositioning the target and adjusting material layer thickness reduced the transmutation half-life of 93 Zr to 67 years and increased the net mass transmuted by a factor of 50. Furthermore, these results demonstrate that fusion reactors can enable LLFP transmutation beyond the practical limits of thermal fission reactors and highlight the critical role of reactor and blanket design optimization. Engineering and fuel-cycle considerations required for deployment are beyond the scope of this neutronics-focused study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

A hybrid Monte Carlo-deterministic second moment method with efficient variance reduction

In this work, we present a hybrid method that combines Monte Carlo with deterministic finite element methods to solve a linear Boltzmann transport equation. Our hybrid method runs orders of magnitude faster than Monte Carlo, without sacrificing accuracy, for a proxy problem from radiative transfer that contains both optically-thick and optically-thin material. We believe that this is the first demonstration of a hybrid Second Moment Method in more than one spatial dimension, the first to consider more than one material, and the first to use variance reduction. Our variance reduction approach arises from an asymptotic analysis in which we show that the magnitude of the scattering source grows without bound. We transform the problem to compute the deviation of the radiation intensity from isotropy. The magnitude of the source in the transformed problem is bounded, and the quality of the hybrid method solution is dramatically improved by a substantial reduction in the variance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗