Search NASA⌕ Search

DOE OSTI · 1976072

Nuclear Data Sheets for A=245

Abstract

Available information pertaining to the nuclear structure of ground and excited states for all known nuclei with mass numbers A=245 have been compiled and evaluated. In this work, the adopted level and decay schemes, as well as the detailed nuclear properties and configuration assignments based on experimental data, are presented for these nuclides. When there are insufficient data, expected values from systematics of nuclear properties and/or theoretical calculations are utilized. Unexpected or discrepant experimental results are also noted. Since the last evaluation, new rotational bands in 245 Pu have been observed to high spin from transfer reaction 244 Pu( 209 Bi, 208 Biγ) by 2014Ho16. While in 245 Am, the 249 Bk α decay measurements by 2013Ah03 added a new rotational band based on π3/2[521] configuration. The 245 Pu β - decay scheme is basically what was proposed in the late 60's and 47 γ rays have still not been placed. In 245 Cm, precise alpha energies and intensities were measured by 2015Ah03 in 249Cf α decay. Their reported alpha energies of the main α group were about 2 keV lower than in the previous evaluation. The spin and parity of the g.s. of 245 Es is still ambiguous as more detailed information on the decay is needed. With the production of 249 No via fusion evaporation reaction by groups in Dubna and GSI, it's alpha decay was studied and some properties of the daughter 245 Fm were published and included in this evalaution. Information on the other nuclides is scarce and not much has been investigated since the last evaluation. A summary and compilation of the discovery of the various nuclides in this mass region is given in: 2013Fr02 ( 245 Pu, 245 Am, 245 Cm, 245 Bk, 245 Cf), 2011Me01 ( 245 Es), and 2013Th02 ( 245 Md, 245 Fm).

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Nesaraja, Caroline D.. 2023-05-08. Nuclear Data Sheets for A=245. https://doi.org/10.1016/j.nds.2023.04.001

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Design-informed neutronics assessment of long-lived fission product transmutation in a tokamak fusion reactor blanket

This study presents a neutronics-based assessment of the feasibility and viability of transmuting six major long-lived fission products (LLFPs) from light-water reactors, namely 99 Tc, 129 I, 79 Se, 93 Zr, 126 Sn, and 135 Cs, within the blanket region of a tokamak fusion reactor, using the MIT ARC design as a concrete fusion configuration. Monte Carlo neutronics simulations were performed to evaluate LLFP transmutation and to compare the results with a reference boiling water reactor (BWR). The results indicate that transmutation of all six LLFPs is neutronics-feasible in fusion reactors, with transmutation half-lives significantly shorter than their natural decay half-lives. For elemental targets, transmutation of 135 Cs, 126 Sn, and 93 Zr was found potentially viable, as the net mass transmuted exceeded that achievable in the reference BWR under identical target volume and irradiation time. When isotopically separated targets were considered, transmutation of 126 Sn and 93 Zr appeared potentially viable. A parametric study demonstrated that plasma geometry modifications can enhance local neutron flux, increasing the transmuted 93 Zr mass by approximately 33% and reducing the transmutation half-life from approximately 240 years to 180 years. Repositioning the target and adjusting material layer thickness reduced the transmutation half-life of 93 Zr to 67 years and increased the net mass transmuted by a factor of 50. Furthermore, these results demonstrate that fusion reactors can enable LLFP transmutation beyond the practical limits of thermal fission reactors and highlight the critical role of reactor and blanket design optimization. Engineering and fuel-cycle considerations required for deployment are beyond the scope of this neutronics-focused study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A hybrid Monte Carlo-deterministic second moment method with efficient variance reduction

In this work, we present a hybrid method that combines Monte Carlo with deterministic finite element methods to solve a linear Boltzmann transport equation. Our hybrid method runs orders of magnitude faster than Monte Carlo, without sacrificing accuracy, for a proxy problem from radiative transfer that contains both optically-thick and optically-thin material. We believe that this is the first demonstration of a hybrid Second Moment Method in more than one spatial dimension, the first to consider more than one material, and the first to use variance reduction. Our variance reduction approach arises from an asymptotic analysis in which we show that the magnitude of the scattering source grows without bound. We transform the problem to compute the deviation of the radiation intensity from isotropy. The magnitude of the source in the transformed problem is bounded, and the quality of the hybrid method solution is dramatically improved by a substantial reduction in the variance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗