Search NASA⌕ Search

DOE OSTI · 21192380

Bulk ratio method for determining surface enhancement using Auger analysis

Abstract

The surface analysis techniques of Auger electron spectroscopy (AES) and x-ray photoelectron spectroscopy (XPS) are often used to characterize the near surface composition of stainless steel. AES is most often used to determine the oxide thickness and the maximum chromium to iron ratio as this information is used to determine if the material is properly electropolished. XPS is primarily used to determine the near surface chemistry as well as the chromium to iron ratio. Instrument calibration is critical to reliable composition determination. For AES, the use of elemental sensitivity factors is found to be a significant source of error. Proposed is a new method for the determination of Cr/Fe ratios using AES. The resulting depth profiles show the proper stainless steel composition under the surface enhanced layer.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Geller, J D. 2008-07-15. Bulk ratio method for determining surface enhancement using Auger analysis. https://doi.org/10.1116/1.2908433. https://searchnasa.com/record/osti%3A21192380/bulk-ratio-method-for-determining-surface-enhancement-using-auger-analysis

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Search NASA by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗