Search NASA⌕ Search
Home/Archive/DOE OSTI

DOE OSTI · 22922901

Structural and Electrical Dependence in Zn-Doped Li-Ferrite Nanostructures

Mahmood, Waqar·Ghazanfar, H.·Khan, M. A. A.·Haq, A.
View original source ↗Export metadata ↓

Abstract

Zinc-doped lithium ferrite nanoparticles with general formula Li{sub 0.46}Zn{sub 0.04}Fe{sub 2.5}O{sub 4} were prepared by Co-precipitation method and their thin films were grown by spin coating method. X-ray diffraction (XRD) confirmed the spinel structure of the synthesized samples. Fine morphology of the films was obtained by controlling the parameters. AC electrical properties including dielectric constant (έ), dielectric loss tangent (tanδ), AC electrical conductivity (σ{sub ac}), and impedance (Z) were studied as a function of frequency at different temperatures and at 1 MHz frequency in a temperature range of 40–500 °C. Dielectric constant, dielectric loss tangent, and ac electrical conductivity showed the decreasing trend with increase in temperature while opposite trend was observed for impedance. Zinc-doped Li-ferrite has better absorption properties in the studied frequency and temperature range as compared to that of Li-ferrites.

Explore related subjects

77 NANOSCIENCE AND NANOTECHNOLOGYCOATINGSCOMPARATIVE EVALUATIONSCOPRECIPITATIONDIELECTRIC MATERIALSDOPED MATERIALSELECTRIC CONDUCTIVITYFERRITESFREQUENCY DEPENDENCELITHIUM COMPOUNDSNANOPARTICLESNANOSTRUCTURESSPINELSTHIN FILMSX-RAY DIFFRACTIONZINC ADDITIONS

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mahmood, Waqar, Ghazanfar, H., Khan, M. A. A., Haq, A.. 2019-09-15. Structural and Electrical Dependence in Zn-Doped Li-Ferrite Nanostructures. https://doi.org/10.1007/s10948-019-5015-6

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2026

Gold Quantum Rods: Modulation of Singlet and Triplet Exciton Populations by the Rod Length

Abstract Gold quantum rods (QRs) of Au60, Au78, Au96, and Au114 (protected by thiolate ligands) exhibit exclusive fluorescence, which is different from the shorter Au42 QR with dual emission (fluorescence + phosphorescence). Herein, we report the excitation wavelength-dependent near-infrared-II photoluminescence (PL) and exciton dynamics of this series of QRs. Interestingly, the fluorescence quantum yield (QY) of the QRs is much higher (2–10×) when the lowest singlet excited state (S1) is excited compared to the excitation of high-lying states (Sn). A metastable intermediate singlet state (denoted S′) is identified by transient absorption spectroscopy when Sn is excited, and this S′ state leads to fast “skybridge” intersystem crossing (ISC), which contributes primarily (>60%) to the total triplet population. With increasing aspect ratio (AR) of QRs (from 6.3 to 18.7), nonradiative processes accelerate, leading to fast decay of the S1 state (hence, less QY) and of the T1 state (barely phosphorescent). A detailed energy flow mechanism is determined for the QRs after photoexcitation, which offers a design principle for manipulation of exciton dynamics toward potential utilization of higher excited states in applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Demonstration of gold nanorod systems for enhanced total efficiency: Experimental and numerical analysis

This study investigates the photothermal performance of gold nanorods engineered to exhibit longitudinal plasmon resonances at 695 nm, 780 nm, and 970 nm. The work combines synthesis, structural characterization, extinction measurements, numerical modeling, and controlled temperature experiments to quantify how nanorod geometry, resonance tuning, concentration, and chamber shape jointly influence heat generation. Transmission electron microscopy confirms that increasing nanorod aspect ratio systematically shifts the longitudinal plasmon peak toward the near-infrared region. Extinction measurements show strong agreement with theoretical predictions, validating the numerical model across two independent datasets. Three chamber geometries were tested under laser excitation at 640 nm, 808 nm, and 980 nm: an ascending stepped base, a flat base, and a descending stepped base. Without nanorods, the ascending geometry produced the highest efficiency due to enhanced natural convection. After introducing gold nanorods, all geometries exhibited substantial thermal enhancement, with total efficiencies exceeding 20%. The strongest improvement was obtained for nanorods resonant at 780 nm with a mass concentration of 4.6 mg/mL implemented on the descending stepped-base geometry. This performance resulted from the combined effect of spectral overlapping with the 808 nm laser, the highest nanorod concentration, and localized heat accumulation that intensified buoyancy-driven flow. The findings demonstrate that total efficiency is governed by a synergistic interplay between optical resonance, nanoparticle concentration, and macroscopic chamber design, revealing the system-level coupling between nanoscale plasmonic absorption and macroscale heat-transfer phenomena. The results provide a validated framework for tuning nanoscale plasmonic absorbers and optimizing thermal systems for applications requiring efficient light-to-heat conversion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗