Simulated Microstructures for Laser Powder Bed Fusion Additive Manufacturing Using Myna, AdditiveFOAM, and ExaCA

Abstract

This dataset provides sample datasets containing voxelized, three-dimensional representations of simulated grain structures and crystallographic orientations that can result from laser powder bed fusion additive manufacturing. The six microstructure files each contain approximately 1 cubic millimeter of material (1 mm x 1 mm cross-section over 26 simulated layers of deposition). Some of the microstructures have columnar grains that extend across nearly the entire simulation domain, while others have more equiaxed or truncated columnar grains. The process conditions to generate these microstructures were from the Peregrine v2023-10 dataset (10.13139/ORNLNCCS/2008021). The codes used are publicly available and released under open-source licenses. Myna (https://github.com/ORNL-MDF/Myna) was used for configuration of the cases from the Peregrine v2023-10 HDF5 dataset and to run the simulation workflow. AdditiveFOAM (https://github.com/ORNL/AdditiveFOAM) was used to simulate the melt pool and generate solidification conditions. And ExaCA (https://github.com/LLNL/ExaCA ) was used to simulate the three-dimensional microstructures.