Search NASA⌕ Search

DOE OSTI · 2572816

Development and characterization of an aerosol-generated multi-method analytical particle test material

Abstract

Ceria (CeO 2 ) particles with low to ultra-low loading of nickel dopant were produced using an aerosol-based, droplet-to-particle synthesis via an in-line calcination technique. This aerosol-based synthesis method enables the production of particles with a monodisperse size distribution. These produced and well-characterized, multi-element, ceria-based particles demonstrate a material exemplar for multi-method analytical testing. They were prepared from a cerium nitrate feedstock where low loading nickel dopant was added at target Ni/(Ni + Ce) atomic percents of 1 %, 0.1 %, and 0.01 %, using a nickel nitrate spike. This methodology proved to produce ceria particles doped with a dynamic range of low to ultra-low loadings of nickel over a 24-h period, with consistent size distribution, morphology, and composition. The successful incorporation of nickel was demonstrated with bulk and single particle inductively coupled plasma mass spectroscopy and revealed notable particle-to-particle elemental homogeneity. X-ray photoelectron spectroscopy demonstrated the presence of a high concentration of nickel dopant incorporated preferentially toward the surface of the particles, and that this dopant aided oxidation of surface Ce(III) atoms to Ce(IV). These particle test materials were then validated through X-ray absorption near edge spectroscopy, comparing the ultra-low 0.01 % Ni and low 1 % Ni-doped ceria samples. This revealed a more-reduced oxidation state of the nickel with an increase in dopant concentration. Finally, this work demonstrates a synthesis and systematic characterization scheme to produce multi-method analytical test particulates.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Shultz-Johnson, Lorianne R. [Savannah River National Laboratory (SRNL), Aiken, SC (United States)], Manard, Benjamin T. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000207400627), Bergin, Rachel [Savannah River National Laboratory (SRNL), Aiken, SC (United States)], Piedmont, Dominic [Brookhaven National Laboratory (BNL), Upton, NY (United States)] (ORCID:0000000287959331), Stanberry, Jordan S. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000328942414), Andrews, Hunter B. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000220919415), Ticknor, Brian W. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000228679073), Topsakal, Mehmet [Brookhaven National Laboratory (BNL), Upton, NY (United States)], Kiss, Andrew [Brookhaven National Laboratory (BNL), Upton, NY (United States)] (ORCID:0000000285155508), Green, Gage [Savannah River National Laboratory (SRNL), Aiken, SC (United States)], Wellons, Matthew [Savannah River National Laboratory (SRNL), Aiken, SC (United States)], Scott, Spencer [Savannah River National Laboratory (SRNL), Aiken, SC (United States)], Barrett, Christopher [Savannah River National Laboratory (SRNL), Aiken, SC (United States)], Gill, Simerjeet K. [Brookhaven National Laboratory (BNL), Upton, NY (United States)], Tazik, Shawna K. [Savannah River National Laboratory (SRNL), Aiken, SC (United States)] (ORCID:0000000195503548). 2025-06-01. Development and characterization of an aerosol-generated multi-method analytical particle test material. https://doi.org/10.1016/j.jaerosci.2025.106624

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗