Extended dynamic mode decomposition for model reduction in fluid dynamics simulations

Libero, Giulia (ORCID:0009000150979371); Chiofalo, Alessia (ORCID:0009000328095064); Ciriello, Valentina (ORCID:0000000216706740); Tartakovsky, Daniel (ORCID:0000000190198935)

doi:10.1063/5.0207957

DOE OSTI · 2578536

Extended dynamic mode decomposition for model reduction in fluid dynamics simulations

Libero, Giulia (ORCID:0009000150979371)·Chiofalo, Alessia (ORCID:0009000328095064)·Ciriello, Valentina (ORCID:0000000216706740)·Tartakovsky, Daniel (ORCID:0000000190198935)

View original source ↗Read source document ↗Export metadata ↓

Abstract

High computational cost and storage/memory requirements of fluid dynamics simulations constrain their usefulness as a predictive tool. Reduced-order models (ROMs) provide a viable solution to this challenge by extracting the key underlying dynamics of a complex system directly from data. We investigate the efficacy and robustness of an extended dynamic mode decomposition (xDMD) algorithm in constructing ROMs of three-dimensional cardiovascular computations. Focusing on the ROMs' accuracy in representation and interpolation, we relate these metrics to the truncation rank of singular value decomposition, which underpins xDMD and other approaches to ROM construction. Our key innovation is to relate the truncation rank to the singular values of the original flow problem. This result establishes a priori guidelines for the xDMD deployment and its likely success as a means of data compression and reconstruction of the system's dynamics from dominant spatiotemporal structures present in the data.

Explore related subjects

Mechanics Physics

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Libero, Giulia (ORCID:0009000150979371), Chiofalo, Alessia (ORCID:0009000328095064), Ciriello, Valentina (ORCID:0000000216706740), Tartakovsky, Daniel (ORCID:0000000190198935). 2024-06-01. Extended dynamic mode decomposition for model reduction in fluid dynamics simulations. https://doi.org/10.1063/5.0207957

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2024

Evanescent and inertial-like waves in rigidly rotating odd viscous liquids

Three-dimensional non-rotating odd viscous liquids give rise to Taylor columns and support axisymmetric inertial-like waves ( J. Fluid Mech ., vol. 973, 2023, A30). When an odd viscous liquid is subjected to rigid-body rotation however, there arise in addition a plethora of other phenomena that need to be clarified. In this paper, we show that three-dimensional incompressible or two-dimensional compressible odd viscous liquids, rotating rigidly with angular velocity 𝛺, give rise to both oscillatory and evanescent inertial-like waves or a combination thereof (which we call of mixed type) that can be non-axisymmetric. By evanescent, we mean that along the radial direction, typically when moving away from a solid boundary, the velocity field decreases exponentially. These waves precess in a prograde or retrograde manner with respect to the rotating frame. The oscillatory and evanescent waves resemble respectively the body and wall-modes observed in (non-odd) rotating Rayleigh–Bénard convection ( J. Fluid Mech ., vol. 248, 1993, pp. 583–604). We show that the three types of waves (wall, body or mixed) can be classified with respect to pairs of planar wavenumbers 𝜅 which are complex, real or a combination, respectively. Experimentally, by observing the precession rate of the patterns, it would be possible to determine the largely unknown values of the odd viscosity coefficients. This formulation recovers as special cases recent studies of equatorial or topological waves in two-dimensional odd viscous liquids which provided examples of the bulk–interface correspondence at frequencies 𝜔 < 2⁢𝛺. We finally point out that the two- and three-dimensional problems are formally equivalent. Their difference then lies in the way data propagate along characteristic rays in three dimensions, which we demonstrate by classifying the resulting Poincaré–Cartan equations.

Mechanics↗

DOE OSTI2024

Stress-controlled medium-amplitude oscillatory shear (MAOStress) of PVA–Borax

We report the first-ever complete measurement of MAOStress material functions, which reveal that stress can be more fundamental than strain or strain rate for understanding linearity limits as a function of Deborah number. The material used is a canonical viscoelastic liquid with a single dominant relaxation time: polyvinyl alcohol (PVA) polymer solution cross-linked with tetrahydroborate (Borax) solution. We outline experimental limit lines and their dependence on geometry and test conditions. These MAOStress measurements enable us to observe the frequency dependence of the weakly nonlinear deviation as a function of stress amplitude. The observed features of MAOStress material functions are distinctly simpler than MAOStrain, where the frequency dependence is much more dramatic. The strain-stiffening transient network model was used to derive a model-informed normalization of the nonlinear material functions that accounts for their scaling with linear material properties. Moreover, we compare the frequency dependence of the critical stress, strain, and strain-rate for the linearity limit, which are rigorously computed from the MAOStress and MAOStrain material functions. While critical strain and strain-rate change by orders of magnitude throughout the Deborah number range, critical stress changes by a factor of about 2, showing that stress is a more fundamental measure of nonlinearity strength. This work extends the experimental accessibility of the weakly nonlinear regime to stress-controlled instruments and deformations, which reveal material physics beyond linear viscoelasticity but at conditions that are accessible to theory and detailed simulation.

Mechanics↗

DOE OSTI2024

Numerical validation of scaling laws for stratified turbulence

Recent theoretical progress using multiscale asymptotic analysis has revealed various possible regimes of stratified turbulence. Notably, buoyancy transport can either be dominated by advection or diffusion, depending on the effective Péclet number of the flow. Two types of asymptotic models have been proposed, which yield measurably different predictions for the characteristic vertical velocity and length scale of the turbulent eddies in both diffusive and non-diffusive regimes. The first, termed a ‘single-scale model’, is designed to describe flow structures having large horizontal and small vertical scales, while the second, termed a ‘multiscale model’, additionally incorporates flow features with small horizontal scales, and reduces to the single-scale model in their absence. By comparing predicted vertical velocity scaling laws with direct numerical simulation data, we show that the multiscale model correctly captures the properties of strongly stratified turbulence within regions dominated by small-scale isotropic motions, whose volume fraction decreases as the stratification increases. Meanwhile its single-scale reduction accurately describes the more orderly, layer-like, quiescent flow outside those regions.

Mechanics↗