Search NASA⌕ Search

DOE OSTI · 2588500

Davis et al. (2025) MDPI Hydrogen Supplement

Abstract

The raw data and figures used in Davis et al. (2025), "A Comparative Analysis of Waste-as-a-Feedstock Accounting Methods in Life Cycle Assessments," published in MDPI Hydrogen journal.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

W Davis, Tyler [National Energy Technology Laboratory], Mahumud, Roksana [National Energy Technology Laboratory], McNaul, Shannon [National Energy Technology Laboratory], Jamieson, Matthew [National Energy Technology Laboratory], Lewis, Eric [National Energy Technology Laboratory]. 2025-09-15. Davis et al. (2025) MDPI Hydrogen Supplement. https://doi.org/10.18141/2588500

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Feedstock and Catalyst Impact on Bio-Oil Production and FCC Co-Processing to Fuels

NREL's thermochemical biomass conversion research is focused on ex-situ upgrading of biomass fast-pyrolysis (FP) vapors as an efficient route to completely biogenic pyrolysis-based fuel precursors, fuels, and value-added chemicals depending on catalyst and process conditions. A near term pathway being developed uses these liquids for co-processing with petroleum feedstocks to assess biogenic carbon incorporation in hydrocarbon fuel feedstocks for potential refinery use. In this work, the impact of feedstock and catalyst on catalytic fast pyrolysis oil (CFPO) composition was determined with the oils then assessed for biogenic fuel production via FCC (fluidized catalytic cracking) co-processing. Biomass vapors were generated via fast pyrolysis with destabilizing vapor components (char, inorganics, tar aerosols) removed by hot gas filtration to produce clean vapors more responsive to catalytic upgrading. A Davison Circulating Riser (DCR), a petroleum industry standard for fluidized catalytic cracking (FCC) catalyst evaluation, was coupled to a custom pyrolyzer system designed to produce consistent-composition pyrolysis vapors as feed to the DCR. Pyrolysis vapors, derived from pure hardwood and softwood, were upgraded using commercially available modified zeolite-based catalysts to produce CFPOs. These upgraded oils were analyzed via 31P and 13C NMR spectroscopy, GCxGC-TOF/MS, carbonyl and ultimate analysis (CHNO), and simulated distillation (SIMDIS) to assess both oil chemistry and distillation behavior as they relate to catalyst and feedstock type for producing fungible hydrocarbon product liquids. These exploratory vapor-phase-upgrading results demonstrated the feasibility of producing refinery-compatible hydrocarbon fuel intermediates entirely from biomass-derived fast-pyrolysis vapors using an industry-accepted DCR system for catalytic upgrading. The FCC co-processing results demonstrated the feasibility of using CFPOs with VGO feeds in FCC refinery operations to produce biogenic carbon containing fuels.

biogenic carbon↗