Search NASASearch

DOE OSTI · 2869785

Spatially Patterned Architectures to Modulate CO 2 Reduction Cascade Catalysis Kinetics

Abstract

Electrochemical CO 2 reduction using renewable sources of electrical energy holds promise for converting CO 2 into fuels and chemicals. The complex interactions among chemical/electrochemical reactions and mass transport make it difficult to analyze the effect of an individual process on electrode performance based only on experimental methods. Here, we developed a generalized steady-state simulation to describe an electrode surface in which sequential cascade catalysts are patterned in a periodic trench design. If appropriately constructed, this trench geometry is hypothesized to be able to yield a higher net current density for a CO 2 reduction (CO 2 R) cascade reaction. We have used realistic experimental reaction kinetics to investigate the role of trench geometry in mass transport, local microenvironments, and selectivity for a model CO 2 R cascade reaction. The model considers local concentration gradients of bicarbonate species at quasi-equilibrium and catalytic surface reactions based on concentration-dependent Butler–Volmer kinetics. Our results suggest that varying the spatial distribution of active sites plays a significant role in facilitating effective mass transport between active sites, modulating selectivity for the cascade reaction, and enhancing the yield of desirable cascade products. Moreover, we observe that this trench geometry significantly alters the cascade reaction rate by affecting the local pH, which can cause inadvertent depletion of available aqueous CO 2 to limit the CO 2 R cascade kinetics and modest suppression of the hydrogen evolution reaction (HER). The results highlight the trade-offs between mass transport, pH, and reaction kinetics that become apparent only when considering the coupled physics of all processes at the electrode surface. Here, this model can thus serve as a primary tool to build more selective and efficient patterned architectures for the CO 2 R cascade catalysis.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

García-Batlle, Marisé [University of North Carolina at Chapel Hill, NC (United States)] (ORCID:0000000291422430), Fernandez, Pablo [University of North Carolina at Chapel Hill, NC (United States)], Sheehan, Colton J. [University of Pennsylvania, Philadelphia, PA (United States)] (ORCID:0000000202845627), He, Shi [University of North Carolina at Chapel Hill, NC (United States)], Mallouk, Thomas E. [University of Pennsylvania, Philadelphia, PA (United States)] (ORCID:0000000345994208), Parsons, Gregory N. [North Carolina State University, Raleigh, NC (United States)] (ORCID:0000000200485859), Cahoon, James F. [University of North Carolina at Chapel Hill, NC (United States)] (ORCID:000000031780215X), Lopez, Rene [University of North Carolina at Chapel Hill, NC (United States)] (ORCID:000000016274066X). 2025-03-26. Spatially Patterned Architectures to Modulate CO 2 Reduction Cascade Catalysis Kinetics. https://doi.org/10.1021/acscatal.5c01176

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Optimized Tandem Catalyst Patterning for CO 2 Reduction Flow Reactors

Tandem catalysis involves two or more catalysts arranged in proximity within a single reaction vessel, with the aim of synergistically aligning the catalysts’ reaction pathways to maximize overall system performance. This study presents a proof of concept showing the integration of continuum transport modeling with design optimization in a simplified two-dimensional flow reactor setup for electrochemical CO 2 reduction. Ag catalysts provide the CO 2 ⟶ CO reaction capability, and Cu catalysts provide the CO ⟶ high-value products reaction capability. Given a set of input parameters, the optimization algorithm uses adjoint methods to modify the Ag/Cu surface patterning in order to maximize the current density toward high-value products, such as ethylene. The optimized designs yield significant performance enhancement especially at more negative applied voltages (i.e., stronger surface reactions) and for larger numbers of patterning sections. For an applied voltage of −1.7 V vs. SHE, the 12-section optimized design increases the current density toward ethylene by up to 65% compared to the unoptimized 2-section design. For the optimized cases, observed differences in the production and consumption of CO (the key intermediate species) and minimized zones of low CO reactant surface concentration on Cu sections explain the improved reactor performance.

CO2 reduction

Plasmonic Hot-Carrier Generation and Catalysis in Ti 3 C 2 O 2 from Real-Time TDDFT Simulations

Photoinduced hot electrons are central to plasmon-driven catalysis. Atomically thin Ti 3 C 2 O 2 , with high carrier density and broad optical absorption, offers a promising platform for plasmon-driven reactions. However, comprehensive investigations of its plasmon resonance, hot-carrier generation, and plasmonic catalytic performance remain limited. In this work, real-time time-dependent density functional theory (rt-TDDFT) was employed to study Ti 3 C 2 O 2 ’s plasmon excitation and hot-carrier generation from nonradiative plasmon damping. The temporal evolution of the dipole moment reveals plasmon resonance in Ti 3 C 2 O 2 , followed by strong plasmon damping that redistributes the stored energy to generate hot carriers. Ti 3 C 2 O 2 with low oxygen vacancy concentration (O v -Ti 3 C 2 O 2 ) exhibits plasmonic behavior resembling the pristine surface, and the plasmon-generated hot electrons can markedly reduce the dissociation barrier of CO 2 at the oxygen vacancy. These findings provide fundamental insights into the plasmonic properties of Ti 3 C 2 O 2 and how they drive its catalytic performance in surface reactions, which is valuable for advancing plasmon-driven catalysis.

CO2 reduction

Selective CO 2 Reduction by Bis(bipyridine)cobalt(II) Catalysts: The Role of Pendant Pyridine as a Proton Acceptor

Electrochemical CO 2 reduction reaction (CO 2 RR) catalyzed by molecular earth-abundant metal catalysts is a promising strategy to convert CO 2 into value-added products. One recent trend in this field has been focusing on the rational design of catalysts by incorporating redox-active ligands and modifying the secondary coordination sphere (SCS) to achieve efficient and selective CO 2 RR. Herein, we report a series of Co bis­(bipyridine) catalysts featuring various dangling groups, such as pyridine, tertiary amine, or butyl, in the secondary coordination sphere (Co-PyMe, Co-Py, Co-PrN, and Co-Bu). Efficient, selective electrocatalytic CO 2 RR was achieved by the complexes after the generation of triply reduced intermediate consisting of a Co I center and a dianionic ligand, producing CO as the major product and trace amount of H 2 . Strong correlations with the identity of dangling groups and turnover frequency (TOF) have been observed, in which Co-PyMe displayed the highest TOF (1086 s –1 in MeCN/H 2 O). Mechanistic studies indicated that the acceleration of CO 2 RR with pyridine-functionalized catalysts were derived from the protonation of pyridine dangling groups which participated as weak acids in the H-bonding network with exogenous proton sources, stabilizing CO 2 -bound intermediates and facilitating proton transfer. In addition, precatalytic CO 2 binding and activation at the third reduction (−2.1 V) was revealed by CV and SEC-IR studies. The resultant doubly reduced CO-bound species acted as a trapping state which inhibited CO 2 RR electrocatalysis. Regeneration of active species was accessed via reductive dissociation of CO at a more negative potential. In conclusion, this study highlights the combined effects of redox-active ligands and pyridine/pyridinium as SCS groups on CO 2 RR catalysis and provides design principles for future development of CO 2 RR catalysts utilizing pyridine/pyridiniums as SCS functional groups to fine-tune the catalytic activity.

CO2 reduction