Vitamin-Mediated Glucose Flow Cell for Sustainable Power Generation

Shon, Jong-Hwa [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Argonne National Laboratory (ANL), Argonne, IL (United States)]; Feng, Ruozhu [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Argonne National Laboratory (ANL), Argonne, IL (United States)] (ORCID:0000000314273571); Kim, Soowhan [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)]; Yan, Litao [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Argonne National Laboratory (ANL), Argonne, IL (United States)]; Shao, Yuyan [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Argonne National Laboratory (ANL), Argonne, IL (United States)] (ORCID:0000000157352670); Wang, Wei [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Argonne National Laboratory (ANL), Argonne, IL (United States)] (ORCID:0000000254534695)

doi:10.1021/acsenergylett.5c02462

DOE OSTI · 3003226

Vitamin-Mediated Glucose Flow Cell for Sustainable Power Generation

View original source ↗Read source document ↗Export metadata ↓

Abstract

Glucose as biofuel asserts unique advantages, including low-temperature electricity generation, easy accessibility, low storage cost, and flexible application for on-demand power generation. Riboflavin, also known as Vitamin B 2 , is a critical component in biological systems and is involved in many metabolic reactions as enzyme cofactors. Inspired by these metabolic reactions, we demonstrate a flow cell for electrochemical glucose oxidation reaction (GOR), using riboflavin as an environmentally friendly mediator to replace traditional noble metal catalysts. When paired with O 2 under alkaline conditions, the glucose flow cell achieves a peak power density of 13 mW/cm 2 , 20 times higher than the previous report in alkaline conditions. The demonstrated vitamin-mediated engineered biofuel flow cell delivered high peak power density at room temperature/ambient pressure while maintaining low cost and environmental friendliness, eliminating the need for a noble metal catalyst.

Explore related subjects

electrolytes energy storage flow cell

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Shon, Jong-Hwa [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Argonne National Laboratory (ANL), Argonne, IL (United States)], Feng, Ruozhu [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Argonne National Laboratory (ANL), Argonne, IL (United States)] (ORCID:0000000314273571), Kim, Soowhan [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)], Yan, Litao [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Argonne National Laboratory (ANL), Argonne, IL (United States)], Shao, Yuyan [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Argonne National Laboratory (ANL), Argonne, IL (United States)] (ORCID:0000000157352670), Wang, Wei [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Argonne National Laboratory (ANL), Argonne, IL (United States)] (ORCID:0000000254534695). 2025-10-15. Vitamin-Mediated Glucose Flow Cell for Sustainable Power Generation. https://doi.org/10.1021/acsenergylett.5c02462

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2026

Quantitative Analysis of the Semiconductor–Electrolyte Interface Using Cyclic Voltammetry Measurements

Small changes in the chemical potential at a semiconductor interface can result in dramatic changes to the space-charge layer that underpins applications in the electronic and photovoltaic industries as well as in photoelectrochemical cells for fuel production. There has hence been great interest in techniques that directly probe the space-charge layer, yet many fail at the semiconductor–electrolyte interface due to the potential drop in the electric double-layer region of the electrolyte. This article demonstrates that photovoltages, obtained from straightforward cyclic voltammetry measurements, provide an experimental and quantitative approach for characterizing the semiconductor–electrolyte interface. Key parameters accessible through this approach include the flat-band potential ( E fb ), the fraction of the total potential that drops across the space-charge layer (γ sc ) and the electric double layer, as well as the surface recombination lifetime (τ s ). Here, we report photovoltage measurements for p -type Si(111) photoelectrodes in contact with electrolytes containing redox-active species with a range of known reduction potentials that exceed the 1.1 eV bandgap. In tetrabutylammonium [NBu 4 ] + electrolyte, the flat-band potential determined for hydrogen-terminated ( p -Si–H), methyl-terminated ( p -Si–CH 3 ), and chemically oxidized ( p -Si–cSiO x ) surfaces were −0.02, −0.31, and 0.30 V vs Fc +/0 , respectively, agreeing well with expected shifts arising from surface dipole modifications. The quantitative analysis also reveals that 67% of the applied bias drops across the space-charge layer for p -Si–H, 73% for p -Si–CH 3 , and only 44% for p -Si–cSiO x . The remaining potential drop is attributed to the interfacial surface layer, which consists of a molecular dipole or oxide overlayer, and the Helmholtz layer within the electrolyte. When the larger [NBu 4 ] + electrolyte was replaced with Li + , the flat-band position showed minimal changes, but the fraction of the potential drop across the space-charge layer increased significantly, consistent with the small cation altering the structure of the electric double layer.

electrolytes↗

DOE OSTI2025

Probing the Solvation Shells of Lithium Ions in Glyme-Based Electrolytes

Glymes have been extensively studied as solvents for Li-battery electrolytes, most recently in equimolar mixtures with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), due to their ability to form stable solvates. However, directly quantifying free and coordinated glyme molecules in the liquid state has been challenging due to several experimental limitations. Here, in this work, new vibrational probes are demonstrated for studying the solvation structures of diglyme and triglyme in LiTFSI electrolytes. These IR probes make use of an amine group to report the solvation state of glymes at salt-to-solvent molar ratios ranging from 1:5 to 1:10. Characterization of the thermodynamic properties of the solvent exchange occurring in the first solvation shell of lithium ions (Li + ) showed an equilibrium constant for these probes close to unity at room temperature. This result demonstrates that the probes exhibit a similar solvation behavior to their glyme analogue. Concentration dependence studies also revealed a lack of significant amounts of contact ion pairs at the studied concentrations. Moreover, the first solvation shell of Li + appears to be formed by two partially chelating glyme molecules, establishing that even triglyme with multiple chelation sites does not fully coordinate the cation. Complementary molecular dynamics (MD) simulations agree with the experimental results and suggest that at these concentrations, TFSI – predominantly forms solvent-separated ion pairs. However, the simulations do not properly capture the partial solvation structure of the glyme molecules in the solvation shell of Li + as derived from the experiments.

electrolytes↗

DOE OSTI2024

The Challenge of Characterizing High-Concentration Electrolytes at the Molecular Level: A Perspective

High-concentration electrolytes (HCEs) are promising materials composed of highly concentrated salt solutions in organic solvents. HCEs have many desirable properties and are particularly important in the field of batteries. However, the number of ways in which these materials can be tuned is very large, which is crucial for tailored electrolyte design. Moreover, the molecular characterization of HCEs is challenging both experimentally and computationally, but it is necessary for their rational design. Therefore, currently the structure–property–performance relationship of these electrolytes has not been directly derived from their characterization. Here, in this Perspective, we present a brief overview of the HCEs and discuss the state-of-the-art characterization methods used to study them at the molecular level. We also address the challenges associated with these methods, including both experimental techniques and computational tools currently available. Emphasis is placed on methods aimed at understanding the physical phenomena that govern the molecular structure and dynamics occurring on the subnanosecond and nanometer time and length scales. Finally, we discuss new strategies for obtaining a comprehensive characterization of HCEs at the molecular level.

electrolytes↗