Search NASA⌕ Search
Home/Archive/DOE OSTI

DOE OSTI · 3029231

Compatibility Screening of Explosive‐Inert Mixtures

Brown, Geoffrey Wayne [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)] (ORCID:0000000341238528)·Moore, James Thomas [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)]
View original source ↗Read source document ↗Export metadata ↓

Abstract

Inert materials are necessary components in explosive devices and they must be tested for compatibility with the explosive materials to ensure that the device will function as expected over its lifetime in representative environments. True compatibility testing is time-consuming and expensive and so compatibility screening is often used as an early assessment. The screening is carried out with analytical methods run at temperatures exceeding those that the device will encounter in its lifetime. Shortcomings of this approach are discussed and improvements using a transient contact method and microcalorimetry are proposed. Typical screening results and microcalorimetry results are compared for a polyurethane adhesive—PBX 9502 combination.

Explore related subjects

36 MATERIALS SCIENCE

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Brown, Geoffrey Wayne [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)] (ORCID:0000000341238528), Moore, James Thomas [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)]. 2025-04-23. Compatibility Screening of Explosive‐Inert Mixtures. https://doi.org/10.1002/prep.12066

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2026

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗