A Data-Driven Framework for Predicting the Sorting and Screening Performance of an Integrated Biomass Feedstock Preprocessing System

Abstract

The characteristics of mechanically sorted and screened lignocellulosic biomass, such as the mass contents of corn stover anatomical fractions (leaves, husks, stalks, cobs, etc.), can be used to calculate the intermediate feedstock quality attributes “yield” and “purity” that indicate the conversion efficiency of biocrude. No prior study has investigated the correlations from the characteristics of raw biomass and preprocessing unit operation parameters to those intermediate feedstock quality attributes. This work presents a data-driven framework for assessing and predicting the intermediate feedstock quality attributes in an integrated biomass feedstock preprocessing system. Our study used corn stover as a typical type of herbaceous biomass because of its abundance in the U.S. It began with data acquisition of moisture content, particle size distribution, and anatomical fractions of the materials after each unit operation in the system. The objective of this preprocessing system is to minimize husks and leaves and maximizing cobs and stalks by mechanically separating the materials into three streams via disc screen and air separator. Prototype neural network models were then developed to evaluate the feasibility of predicting process outcomes based on measurable parameters. It is found that incorporating physical constraints into these prediction models significantly enhances the accuracy of the predicted yield and purity against the ground truth data. The experimental data and model predictions indicate that decreasing throughput increases purity, while higher throughput results in lower purity. Finally, an optimization problem was introduced to search optimal combinations of feed material properties and preprocessing unit operation parameters, as the intermediate feedstock quality attributes – yield and purity, appeared to be competing factors. The study also suggests the continual need to improve the data-driven framework’s predictability by incorporating more accurate physical models to describe the dynamics in the preprocessing units such as the air separator.