Arsenic Removal by Continuous Flow-Through Iron Electrocoagulation and Downstream Steps under Environmentally Relevant Conditions

Abstract

Arsenic (As) contamination in drinking water is a major health concern. This study investigated As(III) and As(V) removal by continuous flow-through iron electrocoagulation (EC) under varying iron doses and water chemistry conditions. Effective arsenic removal (>90% of 100 µg/L) was achieved with a low iron dose of 5 mg/L and a short EC reactor residence time of 11 s that was followed by flocculation and settling. Removal was primarily through adsorption of As(III) and As(V) to the EC-generated Fe(III) oxyhydroxide solids ferrihydrite and lepidocrocite. For influents containing As(III), oxidation of As(III) to As(V) also occurred. The removal processes occurred in both the EC reactor and downstream treatment. EC-generated reactive solids with high surface area and adsorption capacity provided better arsenic removal than with preformed adsorbents. The removed arsenic remained largely immobile in the EC-generated solids. The extent of arsenic removal was generally similar across pH 6 to 8. Phosphate (1 mg/L as P) inhibited the removal of both arsenic species. Dissolved silica (20 mg/L as SiO2) suppressed As(III) removal but had little effect on the amount of As(V) removed. In addition to thermodynamic effects on adsorption equilibria, pH and co-occurring phosphate and silica influenced removal rates by affecting iron oxidation, nucleation, and aggregation kinetics. The results integrate mechanistic understanding with treatment performance, providing insight relevant to both fundamental research and the application of EC in water treatment.