Search NASA⌕ Search

DOE OSTI · 3389343

Ramp-release experiments for strength measurements: Strain-rate dependence

Abstract

This paper presents an enhanced analysis method for investigating material properties at high strain rates, extending the capability of established experimental techniques to gain more information. The ramp-release method has been applied to many experiments reported at high (≈10 5 − 10 6 s −1 ) strain-rates. More recent data gathered at the National Ignition Facility (NIF) has enabled higher (≈10 8 s −1 ) strain-rates to be studied. Here, we present an initial application of ramp-release analysis to NIF ramp-compression data, illustrating both the opportunities and the practical challenges of extending these methods to laser-driven platforms. The higher strain-rates accessed at the NIF mean that there is more strain-rate enhancement to strength, and the experimental configuration means that this enhancement is more readily seen in the data. This is enabled by the capability of avoiding peak-compression attenuation through the sample thickness with a designed hold period made possible by the pulse-shaping capability of NIF. We propose that this combination of experimental conditions and an enhanced analysis method enables the strain-rate enhancement to strength to be studied, and potentially for this to inform physics models at smaller scales than the continuum.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Floyd, Emma [AWE plc, Reading (United Kingdom)] (ORCID:0000000162574905), Eggert, Jon H. [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000157307108), McGuire, Christopher McGuire P. [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000154824978), Volz, Travis J. [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000182249368), Smith, Raymond F. [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000256755731), Celliers, Peter M. [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000176001227), McNaney, James M. [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000335269379), Fratanduono, Dayne E. [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000302483627), Gorman, Martin G. [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000195676166), Briggs, Richard [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000345885802), Brown, Justin L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000304408719), Rothman, Steve D. [AWE plc, Reading (United Kingdom)] (ORCID:0000000288708921), Ali, Suzanne J. [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000318233788). 2026-05-12. Ramp-release experiments for strength measurements: Strain-rate dependence. https://doi.org/10.1063/5.0325594

Cite the original work for its findings. Save a collection to share your selection of sources.

Discover connections

Connections use source metadata and explicit phrase matches, not verified experimental comparisons.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗