Search NASA⌕ Search
Home/Archive/DOE OSTI

DOE OSTI · 3580373

Improved high-gradient performance for medium-velocity superconducting half-wave resonators: Surface preparation and trapped flux mitigation

Wu, Yuting [Michigan State University, East Lansing, MI (United States)] (ORCID:0009000133675261)·Saito, Kenji [Michigan State University, East Lansing, MI (United States)] (ORCID:0000000240189229)·Taylor, Alex [Michigan State University, East Lansing, MI (United States)]·Ganshyn, Andrei [Michigan State University, East Lansing, MI (United States)]·Compton, Chris [Michigan State University, East Lansing, MI (United States)]·Metzgar, Ethan [Michigan State University, East Lansing, MI (United States)] (ORCID:0009000058701115)·Elliott, Kyle [Michigan State University, East Lansing, MI (United States)]·Popielarski, Laura [Michigan State University, East Lansing, MI (United States)]·Miller, Sam [Michigan State University, East Lansing, MI (United States)]·Kim, Sang-hoon [Michigan State University, East Lansing, MI (United States)]·Combs, Spencer [Michigan State University, East Lansing, MI (United States)] (ORCID:0009000175454344)·Konomi, Taro [Michigan State University, East Lansing, MI (United States)]·Xu, Ting [Michigan State University, East Lansing, MI (United States)]·Hartung, Walter [Michigan State University, East Lansing, MI (United States)] (ORCID:0000000278209184)·Chang, Wei [Michigan State University, East Lansing, MI (United States)]·Cheon, Yoo-Lim [Michigan State University, East Lansing, MI (United States)] (ORCID:0000000346095300)
View original source ↗Read source document ↗Export metadata ↓

Abstract

A development effort to improve the performance of superconducting radio-frequency half-wave resonators (SRF HWRs) is underway at the Facility for Rare Isotope Beams (FRIB), where 220 such resonators are in operation. Our goal was to achieve an intrinsic quality factor (𝑄 0 ) of ≥ 2 × 10 10 at an accelerating gradient (𝐸 acc ) of 12 MV/m. FRIB production resonators were prepared with buffered chemical polishing. First trials of electropolishing (EP) and post-EP low-temperature baking of FRIB HWRs allowed us to reach higher gradient (15 MV/m, limited by quench) with a higher quality factor at high gradient, but 𝑄 0 was still below our goal. Trapped magnetic flux during the Dewar test was found to be a source of 𝑄 0 reduction. Three strategies were used to reduce the trapped flux: (i) adding a local magnetic shield (LMGS) to supplement the “global” magnetic shield around the Dewar for reduction of the ambient magnetic field; (ii) performing a “uniform cooldown” (UC) to reduce the thermoelectric currents; and (iii) using a compensation coil to further reduce the ambient field with active field cancellation (AFC). The LMGS improved the 𝑄 0 , but not enough to reach our goal. With UC and AFC, we exceeded our goal, reaching 𝑄 0 = 2.8 ×10 10 at 𝐸 acc = 12 MV/m.

Explore related subjects

Cryogenics & vacuum technologySuperconducting RF

Keep this discovery

BibTeXRIS

Wu, Yuting [Michigan State University, East Lansing, MI (United States)] (ORCID:0009000133675261), Saito, Kenji [Michigan State University, East Lansing, MI (United States)] (ORCID:0000000240189229), Taylor, Alex [Michigan State University, East Lansing, MI (United States)], Ganshyn, Andrei [Michigan State University, East Lansing, MI (United States)], Compton, Chris [Michigan State University, East Lansing, MI (United States)], Metzgar, Ethan [Michigan State University, East Lansing, MI (United States)] (ORCID:0009000058701115), Elliott, Kyle [Michigan State University, East Lansing, MI (United States)], Popielarski, Laura [Michigan State University, East Lansing, MI (United States)], Miller, Sam [Michigan State University, East Lansing, MI (United States)], Kim, Sang-hoon [Michigan State University, East Lansing, MI (United States)], Combs, Spencer [Michigan State University, East Lansing, MI (United States)] (ORCID:0009000175454344), Konomi, Taro [Michigan State University, East Lansing, MI (United States)], Xu, Ting [Michigan State University, East Lansing, MI (United States)], Hartung, Walter [Michigan State University, East Lansing, MI (United States)] (ORCID:0000000278209184), Chang, Wei [Michigan State University, East Lansing, MI (United States)], Cheon, Yoo-Lim [Michigan State University, East Lansing, MI (United States)] (ORCID:0000000346095300). 2026-03-10. Improved high-gradient performance for medium-velocity superconducting half-wave resonators: Surface preparation and trapped flux mitigation. https://doi.org/10.1103/nh3z-zwz3

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related discoveries

NASA NTRSDate not supplied

Stationary Testing of a Pulse Tube Cryocooler Designed to Rotate at 6800 RPM with the Superconducting Rotor of an Electric Machine

Electrified aircraft are being developed to increase the efficiency and reduce the cost of operating subsonic transport aircraft. Achieving a substantial impact necessitates focusing on single- and twin-aisle aircraft which use propulsion systems with >20 MW ratings. For these aircraft, multi-MW superconducting electric machines are being developed due to their high specific power and high efficiency. Most of these electric machines employ superconductors on their rotor, thereby requiring cryogenic cooling of the rotating system. An attractive solution is to conductively cool the rotor using a cryocooler that rotates with the rotor. NASA has been developing a 50 K pulse tube cryocooler for its High Efficiency Megawatt Motor (HEMM) that can operate while rotating at up to 6,800 rpm. The first non-rotating tests of the fully assembled HEMM cryocooler have been completed, and initial testing has yielded a no-load temperature of 112 K. A small helium leak into the vacuum system has been identified as the major bottleneck to performance, and based on measurements with the motor turned off there is an observed vacuum-side heat leak of approximately 30 W at 115 K. Immediate next steps for testing are to locate and mitigate the apparent helium leaks into the vacuum chamber. Thus far, compressor performance and the apparent heat lift after correcting for the heat leak are on par with expectations.

Electrified Aircraft Propulsion↗
DOE OSTI2026

Superconducting Material Growth for Radio-Frequency (RF) Cavities

Superconducting radio-frequency (SRF) cavities, usually manufactured from Niobium (Nb), are vital components of modern particle accelerators because of their ability to achieve high acceleration gradients with little power dissipation. Naturally forming Nb surface oxides significantly alter cavity performance by changing surface resistance. A nondestructive characterization of oxide thickness is helpful for relating surface processing treatments to cavity performance. This work develops a protocol to measure Nb oxide thickness using Angle-Resolved X-ray Photoelectron Spectroscopy (ARXPS) while correcting instrumental errors. Using uniform bulk standard samples (Silver, Aluminum oxide, and Germanium), we determined a baseline correction factor to account for analyzer-related intensity evolution as the measurement angle increases. The correction factor was then applied to Nb 3d ARXPS data. Applying the Strohmeier equation to the corrected data yielded a Nb2O5 thickness of 6.04 nm, closely matching the 5.5 (±.05) nm value obtained from cross-sectional transmission electron microscopy. Our approach will bring a method to incorporate inherent errors in the thickness measurements using ARXPS and can be broadly applied to improve the accuracy of thickness measurements in a wide range of heterostructures.

Lambert, Nathan [Fermilab]↗
NASA NTRSDate not supplied

NASA Interests in Superconducting and Cryogenic Technology

NASA develops and operates technology for a wide range of applications and environments across its aeronautics and space portfolios. This presentation will summarize the applications and environments where superconducting technology and associated cryogenics are contributing to NASA’s missions and areas where there is an opportunity to expand the contribution. Important characteristics of high priority space environments will be discussed. An emphasis will be placed on aircraft propulsion and NASA’s Artemis mission (a Moon to Mars initiative). The discussion of space applications will include takeaways from NASA’s recent rankings of 187 space technology “shortfalls”. The aircraft propulsion application will be described in detail and existing NASA investments will be summarized.

Electrified Aircraft Propulsion↗