Search NASA⌕ Search

DOE OSTI · 925617

Materials and Component Development for Advanced Turbine Systems

Abstract

In order to meet the 2010-2020 DOE Fossil Energy goals for Advanced Power Systems, future oxy-fuel and hydrogen-fired turbines will need to be operated at higher temperatures for extended periods of time, in environments that contain substantially higher moisture concentrations in comparison to current commercial natural gas-fired turbines. Development of modified or advanced material systems, combined with aerothermal concepts are currently being addressed in order to achieve successful operation of these land-based engines. To support the advanced turbine technology development, the National Energy Technology Laboratory (NETL) has initiated a research program effort in collaboration with the University of Pittsburgh (UPitt), and West Virginia University (WVU), working in conjunction with commercial material and coating suppliers as Howmet International and Coatings for Industry (CFI), and test facilities as Westinghouse Plasma Corporation (WPC) and Praxair, to develop advanced material and aerothermal technologies for use in future oxy-fuel and hydrogen-fired turbine applications. Our program efforts and recent results are presented.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Alvin, M A, Pettit, F, Meier, G, Yanar, N, Chyu, M, Mazzotta, D, Slaughter, W, Karaivanov, V, Kang, B, Feng, C, Chen, R, Fu, T-C. 2008-10-01. Materials and Component Development for Advanced Turbine Systems. https://doi.org/10.1115/gt2009-59106. https://searchnasa.com/record/osti%3A925617/materials-and-component-development-for-advanced-turbine-systems

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Search NASA by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related reports

Helium-volume dynamics of Upper Freeport coal powder and lumps

Exposure to 7 MPa of helium at room temperature alters the texture of Upper Freeport coal in a lump form. The differences in texture and porosity between coal powder and lumps may affect the transport and interaction of fluids and coal. In this work, the information about the coal texture and micro- and meso-porosity was obtained via the BET, BJH, and Dubinin–Astakhov analyses. We further investigated the free-fluid-phase volume (free-volume) effects due to helium interaction with the powder and the lumps. During the manometric experiment, helium penetration into the dry coal matrix resulted in slow relaxation of pressure. After exposure of coal to helium, there have been no significant changes of the macroscopic dimensions observed and the relaxation process can be attributed to microscopic ‘free-volume’ effects. Evolution of the sorption–desorption rates indicates that exposure to helium may change the texture and apparent (helium) density of dry coal.

ADSORPTION HEAT↗

Calculation of Reactive-evaporation Rates of Chromia

A methodology is developed to calculate Cr-evaporation rates from Cr2O3 with a flat planar geometry. Variables include temperature, total pressure, gas velocity, and gas composition. The methodology was applied to solid-oxide, fuel cell conditions for metallic interconnects and to advanced-steam turbines conditions. The high velocities and pressures of the advanced steam turbine led to evaporation predictions as high as 5.18 9 10-8 kg/m2/s of CrO2(OH)2(g) at 760 °C and 34.5 MPa. This is equivalent to 0.080 mm per year of solid Cr loss. Chromium evaporation is expected to be an important oxidation mechanism with the types of nickel-base alloys proposed for use above 650 °C in advanced-steam boilers and turbines. It is shown that laboratory experiments, with much lower steam velocities and usually much lower total pressure than found in advanced steam turbines, would best reproduce chromium-evaporation behavior with atmospheres that approach either O2 + H2O or air + H2O with 57% H2O.

ADSORPTION HEAT↗