Search NASA⌕ Search

DOE OSTI · 934824

FOAM DENSITY SENSITIVITY STUDY FOR THE 9977 PACKAGE

Abstract

Two layers of insulation fill the volume of the 9977 package between the drum liner and the shell. One of these layers is composed of General Plastics FR-3716 polyurethane foam (also known as Last-A-Foam{reg_sign}), poured through fill holes in the drum bottom and foamed in place. There was concern that the density of the foam insulating layer may vary due to the manufacturing process and that variations in foam density would compromise the safety basis of the package. Thus, a structural finite element analysis was performed to investigate this concern. The investigation examined the effect of replacing the material properties for the FR-3716 polyurethane foam, which has a density equal to 16 lb{sub m}/ft{sup 3}, with material properties of similar foam with varying densities through finite element analysis of hypothetical accident conditions (HAC) pertaining to impact conditions. The results showed that the functional performance of the containment vessel (CV) was not compromised under the conditions investigated.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Gorczyca, J, Tsu-Te Wu, T. 2008-05-02. FOAM DENSITY SENSITIVITY STUDY FOR THE 9977 PACKAGE. https://searchnasa.com/record/osti%3A934824/foam-density-sensitivity-study-for-the-9977-package

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Search NASA by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗