Search NASA⌕ Search

DOE OSTI · 940188

Technical Report - Final report

Abstract

This project was a collaborative effort between Dr Teresa Burns and Dr John Larese to study the physisorption of polar molecules on ionic substrates. The work will be completed at both Coastal Carolina University and Brookhaven National Laboratory. The goals of the research are: 1) to provide detailed thermodynamic information about dipolar molecules adsorbed on ionic substrates, critical to accurately modeling the systems of interest using a spin-1 Ising model; 2) to study the structure of the adsorbed layer from the gas phase, experimentally verifying the application of the model to these systems; 3) to extend the modeling studies and structural measurements to systems adsorbed from the liquid phase. The systems will be studied using thermodynamic techniques, e.g., adsorption isotherm both from the gas and liquid phase, and x-ray structural measurements. This project will strengthen the physical science research efforts at CCU, and hence in South Carolina.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Burns, Teresa. 2008-10-30. Technical Report - Final report. https://doi.org/10.2172/940188

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗