Search NASA⌕ Search

DOE OSTI · 952923

Hydrogen storage based on physisorption.

Abstract

Physisorption of molecular hydrogen based on neutral and negatively charged aromatic molecular systems has been evaluated using ab initio calculations to estimate the binding energy, {Delta}H, and {Delta}G at 298 ({approx}77 bar) and 77 K (45 bar) in order to compare calculated results with experimental measurements of hydrogen adsorption. The molecular systems used in this study were corannulene (C{sub 20}H{sub 10}), dicyclopenta[def,jkl]triphenylene (C{sub 20}H{sub 10}), 5,8-dioxo-5,8-dihydroindeno[2,1-c]fluorene (C{sub 20}H{sub 10}O{sub 2}), 6-hexyl-5,8-dioxo-5,8-dihydroindeno[2,1-c]fluorene (C{sub 26}H{sub 22}O{sub 2}), coronene (C{sub 24}H{sub 12}), dilithium phthalocyanine (Li{sub 2}Pc, C{sub 32}H{sub 16}Li{sub 2}N{sub 8}), tetrabutylammonium lithium phthalocyanine (TBA-LiPc, C{sub 48}H{sub 52}LiN{sub 9}), and tetramethylammonium lithium phthalocyanine (TMA-LiPc, C{sub 36}H{sub 28}LiN{sub 9}). It was found (a) that the calculated term that corrects 0 K electronic energies to give Gibbs energies (thermal correction to Gibbs energy, TCGE) serves as a good approximation of the adsorbent binding energy required in order for a physisorption process to be thermodynamically allowed and (b) that the binding energy for neutral aromatic molecules varies as a function of curvature (e.g., corannulene versus coronene) or if electron-withdrawing or -donating groups are part of the adsorbent. A negatively charged aromatic ring, the lithium phthalocyanine complex anion, [LiPc]{sup -}, introduces charge-induced dipole interactions into the adsorption process, resulting in a doubling of the binding energy of Li{sub 2}Pc relative to corannulene. Experimental hydrogen adsorption results for Li{sub 2}Pc, which are consistent with MD simulation results using x-Li{sub 2}Pc to simulate the adsorbent, suggest that only one side of the phthalocyanine ring is used in the adsorption process. The introduction of a tetrabutylammonium cation as a replacement for one lithium ion in Li{sub 2}Pc has the effect of increasing the number of hydrogen molecules adsorbed from 10 (3.80 wt %) for Li{sub 2}Pc to 24 (5.93 wt %) at 77 K and 45 bar, suggesting that both sides of the phthalocyanine ring are available for hydrogen adsorption. MD simulations of layered tetramethylammonium lithium phthalocyanine molecular systems illustrate that doubling the wt % H{sub 2} adsorbed is possible via such a system. Ab initio calculations also suggest that layered or sandwich structures can result in significant reductions in the pressure required for hydrogen adsorption.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Scanlon, L G, Feld, W A, Balbuena, P B, Sandi, G, Duan, F, Underwood, K A, Hunter, N, Mack, J, Rottmayer, M A, Tsao, M. 2009-04-09. Hydrogen storage based on physisorption.. https://doi.org/10.1021/jp809097v

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Elucidating key reducing species beyond ions in hydrogen plasma smelting reduction of iron ore

Hydrogen plasma smelting reduction (HPSR) of iron ore has attracted significant attention over the past decade due to its high-temperature operation, rapid plasma mediated reduction kinetics, and simpler density-based separation of molten iron product, compared to H2-based solid-state reduction. All of these attributes enable processing of low-grade ores for downstream use in electric-arc furnaces, as virgin iron with low gangue content is required for high quality steel and improved furnace operation. While positive ions exist within the plasma arc, this work demonstrates that near the anodic ore surface, hydrogen radicals and vibrationally excited hydrogen species dominate and their densities correlate well with observed reduction rates. Species concentrations in the transferred plasma arc and at the plasma-ore interface are evaluated using coupled thermal plasma and near-wall non-equilibrium plasma models. The thermal plasma model is validated against experimental voltage data and spectroscopic measurements of plasma temperature and density for varying current inputs. Modeling of the near surface thermochemical non-equilibrium and micrometer scale anode sheath layer reveals, in addition to the expected H + , significant concentrations of ArH + and H$^+_3$ ions, typically not observed in thermal plasmas under thermodynamic equilibrium. Our results show that the inverted sheath structure at the anodic ore surface strongly suppresses reactive positive ion fluxes, while non-equilibrium electron-impact processes generate abundant hydrogen radicals and vibrationally excited species. These findings highlight the critical role of non-equilibrium effects in hydrogen arc-driven iron ore reduction and advance understanding beyond prevailing hypotheses centered on hydrogen ion-driven mechanisms.

08 HYDROGEN↗

SimH 2 : an integrated techno-economic modeling framework for hydrogen pipeline infrastructure and network optimization

Large-scale hydrogen (H 2 ) pipeline transport design and network optimization have seldom been reported due to the lack of a cost model accounting for the relationship between transport cost and hydrogen mass flow rate. Here, this work introduced a system-level cost model for hydrogen pipeline transport at supercritical state and integrated it with an existing CO 2 pipeline network tool, SimCCS, for hydrogen-specific pipeline design and optimization. The Intermountain West (I-West) region of the U.S., historically dependent on fossil fuel-based economies, is chosen to demonstrate the capabilities of our H 2 pipeline cost model and transport network optimization platform called SimH 2 . Two scenarios are examined: one where the pipeline is not allowed to pass through disadvantaged communities and the other where it is permitted. The results highlight that incorporating disadvantaged-community constraints lead to longer pipeline routes and increased transport costs, reflecting the trade-offs involved in equitable infrastructure development. It is demonstrated that the newly developed SimH 2 tool not only enables the efficient design of H 2 transportation pipelines but also optimizes the network by accounting for local terrain and the presence of disadvantaged areas.

08 HYDROGEN↗

Disordered hydrogen adsorption at the three-fold site of W(110)

Hydrogen often forms disordered phases on metals; however, deciphering the atomic-scale behavior requires experimental and modeling techniques that directly probe the short-range order between neighboring hydrogen adsorbates. Here, to address this challenge, we applied direct recoil spectroscopy (DRS) to investigate hydrogen adsorption on the W(110) surface. We show that the recoiled hydrogen flux measured during DRS is sensitive to the short range order of the adsorbed hydrogen. Ordered hydrogen neighbors are much more efficient at dechanneling incident ions along low-index surface channels, strongly suppressing the recoiled hydrogen flux along these directions. By modeling the DRS measurements with molecular dynamics for ordered and disordered hydrogen phases, we find that at a hydrogen surface coverage of approximately Θ = 0.6, the hydrogen adsorbates are bound to three-fold sites in a disordered phase at room temperature. This finding is consistent with transfer-matrix scaling model calculations that suggest the transition to an ordered hydrogen phase occurs at a greater surface coverage of Θ = 0.83.

08 HYDROGEN↗