Search NASA⌕ Search

DOE OSTI · 974864

Disposal Systems Evaluations and Tool Development - Engineered Barrier System Evaluation (Work Package LL1015080425)

Abstract

The Disposal Systems Evaluation Framework (DSEF) will use a logical process for developing one or more disposal system concepts (also referred to as repository system in this report) for any given waste form and geologic setting combination. In the Features, Events, and Processes (FEPs) group of work packages, there are seven categories of waste forms and eight categories of geologic setting being studied. The DSEF will also establish a Used Fuel Disposition Campaign (UFDC) knowledge management system to organize high-level information, data, and assumptions, thereby facilitating consistency in high-level system simulation and economic analyses. This system likely will be housed with the INL-based documentation system. Attention is given to lessons oearned from the systems used at the Waste Isolation Pilot Plant (WIPP) and the Yucca Mountain Project (YMP). Where reference material from other programs (e.g., international) is used or cited, the knowledge-management system imports the reference material directly or refer to it in bibliography form. Alternative data sets (e.g., from other programs) will also be utilized to evaluate their influence on DSEF analyses for given waste form and disposal-system combinations. The knowledge-management system can also be used to maintain the results of DSEF realizations, enabling the comparison and ranking of various waste-form/disposal-system-environment/disposal-system-design options. Finally, the UFDC knowledge-management system will be able to provide a compendium of 'templates' that can be utilized, in a labor-efficient fashion, to build parallel DSEF analyses (e.g., 'one offs'). The DSEF will not be a stand-alone, push-the-button and wait for the results, item of software. it will use osftware (probably EXCEL, initially), to guide the team members through a logical process of evaluating combinations of waste-form, disposal-syste-environment, and disposal-system design. In later stages, it will utilize software developed in the field of knowledge engineering and knowledge-management systems (Umeki et al. 2009). At certain points in the logical process, the DSEF software will point the evaluate to other software tools to do analyses needed to move the process forward. In the development of the DSEF, they will be mindful to make it no more complex than necessary to evaluate the system being considered. The DSEF will organize and document the work such that multiple realizations for different combinations can be compared and contrasted.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Blink, J A, Buscheck, T A, Halsey, W G, Wolery, T. 2010-03-19. Disposal Systems Evaluations and Tool Development - Engineered Barrier System Evaluation (Work Package LL1015080425). https://doi.org/10.2172/974864

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

ZiaCore Critical Experiment Demonstrates Key Technologies for Nuclear Energy Systems

ZiaCore is a LANL Laboratory Directed Research and Development (LDRD) project focused on developing and demonstrating key technologies for future nuclear energy systems. The project itself was split into three tasks: 1) Design of the ZiaCore Reactor, a UO2 fueled, graphite and zirconium-hydride (ZrH) moderated, heat pipe cooled micro-reactor 2) Development of the ZrH and heat pipes components 3) Performance of a critical experiment with a representative portion of the ZiaCore reactor incorporating the ZrH and heat pipes developed and made at LANL.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Operating Experience Data Analysis for Digital Instrumentation and Control System Reliability and Risk Assessment in Nuclear Power Plants

The implementation of advanced digital instrumentation and control (DI&C) systems in U.S. nuclear power plants (NPPs) can bring significant advancements in reliability, monitoring, and control capabilities. However, these systems also introduce new challenges, particularly in assessing risks such as common-cause failures (CCFs) and establishing robust reliability estimates for DI&C components. Addressing these challenges is critical for ensuring the safe and efficient operation of NPPs. Recently, Idaho National Laboratory was tasked by the U.S. Nuclear Regulatory Commission (NRC) to conduct a DI&C reliability study using operating experience data from the nuclear industry. The two operating experience data sources for the study are the Institute of Nuclear Power Operations’ Industry Reporting and Information System (IRIS) and the NRC’s Licensee Event Report database which is hosted at Idaho National Laboratory at https://lersearch.inl.gov/LERSearchCriteria.aspx. This report provides a comprehensive examination of DI&C systems, including their architecture, operational advantages, and associated challenges. It reviews existing industry DI&C studies and failure mode taxonomies, along with reliability data from various industries. Through a detailed analysis of these databases, the study provides insights into DI&C system performance. Considerations should be given to incorporate DI&C failure data into the NRC's Integrated Data Collection and Coding System and updating the Reliability and Availability Data System to support ongoing DI&C reliability studies. Recommendations are also provided for modeling DI&C reliability and CCF in probabilistic risk assessment, thereby supporting risk-informed decision-making and enhancing the reliability and safety of NPPs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗