Search NASA⌕ Search

DOE OSTI · 993369

Materials Challenges in the U. S. Fusion Program

Abstract

Fusion reactor materials will be required to function in an extraordinarily demanding environment that includes various combinations of high temperatures, chemical interactions, time-dependent thermal and mechanical loads, and intense neutron fluxes. This environment produces atomic displacement damage ultimately equivalent to displacing every atom in the material up to about 150 times during its expected service life, as well as changes in chemical composition by transmutation reactions, including the introduction of damaging concentrations of reactive and insoluble gases. Radiation damage degrades materials properties through processes that include hardening, embrittlement, phase instabilities, segregation, precipitation, irradiation creep, volumetric swelling, He embrittlement, and radiation-induced conductivity. A long-standing feasibility issue is the development of structural materials that can tolerate the intense fusion neutron environment. The U. S. Fusion Materials Program is engaged in a science-based effort to develop the scientific understanding of the damage mechanisms controlling performance-limiting phenomena of materials for fusion power systems. The program employs the full suite of experimental and computational tools to explore life limiting materials degradation phenomena in the fusion neutron environment. Our overarching goal is to develop experimentally validated, physics-based, predictive models of complex material behavior that can be used to improve existing materials or to design better ones. To a large extent, structural materials in the fusion blanket region most strongly impact the technical feasibility, economic attractiveness and environmental acceptability of fusion power systems. Therefore research on structural materials is the main focus of the program. To produce an economically attractive fusion reactor, while simultaneously achieving safety and environmental acceptability goals, the program is developing low or reduced activation materials so that when they are removed from service they will not require long-term deep geological disposal and may be recyclable. Only a limited number of materials possess the physical, mechanical and low-activation characteristics required: reduced activation steels, vanadium alloys, and SiC/SiC composites. In the recent past the fusion materials research emphasis was on defect production and migration mechanisms, low-to-intermediate temperature deformation and fracture behavior of these materials, as well as the fundamental effects of irradiation on the electrical and thermal properties of SiC. In the future the program focus will be on investigating the synergistic effects of He, tritium and neutron irradiation on the properties of bonded materials, as well as developing a mechanistic understanding of damage evolution at high-temperatures due to creep, fatigue and creep-fatigue interaction. In this article we choose to highlight recent and ongoing experimental and computational efforts to characterize and understand the effects of He on microstructural evolution in ferritic/martensitic steels, and an important revolutionary class of materials – nanostructured ferritic alloys (NFA).

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kurtz, Richard J. 2008-06-01. Materials Challenges in the U. S. Fusion Program. https://searchnasa.com/record/osti%3A993369/materials-challenges-in-the-u-s-fusion-program

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Search NASA by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related reports

Nodal capacity expansion planning with flexible large-scale load siting

We propose explicitly incorporating large-scale load siting into a stochastic nodal power system capacity expansion planning model that concurrently co-optimizes generation, transmission, and storage expansion. The potential operational flexibility of some of these large loads is also taken into account by considering them as consisting of a set of tranches with different reliability requirements, which are modeled as a constraint on expected served energy across operational scenarios. We implement our model as a two-stage stochastic mixed-integer optimization problem with cross-scenario expectation constraints. To overcome the challenge of scalability, we build upon existing work to implement this model on a high performance computing platform and exploit scenario parallelization using an augmented Progressive Hedging Algorithm. The algorithm is implemented using the bounding features of mpisppy, which have shown to provide satisfactory provable optimality gaps despite the absence of theoretical guarantees of convergence. We test our approach and assess the value of this proactive planning framework on total system cost and reliability metrics using realistic testcases geographically assigned to San Diego and South Carolina, with datacenter and direct air capture facilities as large loads.

24 POWER TRANSMISSION AND DISTRIBUTION↗

From zonal to nodal capacity expansion planning: Spatial aggregation impacts on a realistic test-case

Solving power system capacity expansion planning (CEP) problems at realistic spatial resolutions is computationally challenging. Thus, a common practice is to solve CEP over zonal models with low spatial resolution rather than over full-scale nodal power networks. Due to improvements in solving large-scale stochastic mixed integer programs, these computational limitations are becoming less relevant, and the assumption that zonal models are realistic and useful approximations of nodal CEP is worth revisiting. Here, this work is the first to conduct a systematic computational study on the assumption that spatial aggregation can reasonably be used for ISO-scale CEP. By considering a realistic, large-scale test network based on the state of California with over 8000 buses, we find that well-designed small spatial aggregations can yield good approximations but that coarser zonal models may result in large distortions of investment decisions, e.g., capacity under-investment of up to 41% for the lowest resolution model considered.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Multi-facility analysis using metered power data to quantify MRI energy use and utility bill costs across scanner operating modes

This study quantifies the energy consumption of magnetic resonance imaging (MRI) scanners across discrete operating modes during routine clinical workflows, based solely on electrical power measurements. Although previous studies have investigated MRI energy consumption within single hospitals or specific clinical settings, this research provides a broader and more systematic analysis. Researchers analyzed electrical power data and applied a previously developed semi-automatic method for identifying MRI operating modes using load duration curves for 20 MRI scanners across four different U.S. healthcare facilities, encompassing outpatient, inpatient, and mixed-use clinical settings. A key innovation is the inclusion of localized hourly utility rates to estimate costs, a parameter absent in prior literature. Key findings indicate significant variability in energy and cost profiles between weekdays and weekends. Scanner characteristics, including magnet strength, manufacturer, vintage, location, and clinical setting, influenced average daily energy consumption and power thresholds for operating modes. Notably, the clinical setting of a scanner predominantly determines its energy use. For example, the scanners in outpatient facilities consumed more energy. The breakdown of energy usage and costs by operating modes showed scanners spend between 61% and 93% of their time in nonproductive modes, with one outlier spending 34%. Average daily energy use for the scanners in the study ranged from 160 to 1069 kWh, with energy costs ranging from $\$$9 to $\$$149. This study uses an existing framework to quantify MRI energy behavior, leading to insights that can enable improved performance and cost savings across different healthcare environments.

24 POWER TRANSMISSION AND DISTRIBUTION↗