Search NASA⌕ Search

SEARCH · Search NASA

Results for “Absorption capacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Structural and thermodynamic effects of hydration in Na-zeolite A (LTA) from low-temperature heat capacity

Zeolite A (Linde Type A; LTA) is an industrially important porous mineral that has recently been shown to exhibit framework flexibility upon changes in hydration level. Here, to investigate the flexibility transition from a thermodynamic perspective, we have performed heat capacity measurements on sodium zeolite A at seven incremental hydration levels ranging from zero to equilibrium with ambient air. Excess low-frequency vibrations beyond the predictions of the Debye model are found in all samples, and the frequency of these vibrations increases as a function of hydration level. This suggests that an increase in hydration causes a decrease in at least one type of framework flexibility for sodium zeolite A. In addition, a subtle excess heat capacity contribution from 150 to 280 K is observed only for low and intermediate hydration levels, which may arise from a transformation tied to framework flexibility previously observed in zeolite A via gas absorption calorimetry. Values of the standard thermodynamic functions C p,m °, Δ 0 T S m °, Δ 0 T H m °, and Φ m ° are also reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dual Purpose Canister Reactivity and Groundwater Absorption Analyses (Rev. 7)

The current spent nuclear fuel (SNF) management strategy includes reliance on dry storage. Utilities are meeting their interim storage needs on an individual basis with use of large-capacity dry storage casks, with a current focus on meeting existing storage and transportation requirements, as disposal requirements are not currently available. These casks are commonly known as dual-purpose (i.e., storage and transportation) canisters (DPCs). However, a small percentage of single-purpose (storage only) systems is also being used to meet storage needs. These are included under the “DPC” heading. This report investigates the postclosure criticality safety aspects of DPCs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Suppressing the Shuttle Effects with FeCo/SPAN Cathodes and High-Concentration Electrolytes for High-Performance Lithium–Sulfur Batteries

The shuttle effects and the sluggish redox kinetics are two of the main challenges in lithium–sulfur (Li–S) batteries, which significantly reduce the capacity of the batteries and restrict their commercialization. Herein, FeCo/sulfurized polyacrylonitrile (SPAN) is synthesized as a cathode material via the electrospinning technique and a further heat treatment. Synchrotron X-ray absorption spectroscopy confirmed the existence of Fe–S/Fe and Co–S bonds in FeCo/SPAN, which benefit the adsorptive and catalytic activities toward lithium polysulfides (LiPSs). Here, we further investigated the effect of electrolyte concentration in inhibiting the shuttle of LiPSs in Li–S batteries. Small-angle X-ray scattering (SAXS) reveals that more contact ion pairs are formed and fewer free solvent molecules exist with the increase of the electrolyte concentration, which can inhibit the dissolution and shuttle of LiPSs. Finally, the batteries assembled with high-concentration electrolytes (3 M LiTFSI in DOL/DME) exhibit a higher specific capacity retention compared to those assembled with low-concentration electrolytes. This work enriches the route to prepare Li–S batteries with the rational design of cathode materials and electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2022

Linear relationships for modeling CO 2 absorption in aqueous alkanolamine solutions in a thermodynamically consistent way

A thermodynamically consistent model for the carbon dioxide (CO 2 ) absorption in aqueous alkanolamine system is of great importance in the research and development of a CO 2 capture process. To facilitate the development of thermodynamic models, linear Gibbs free energy, enthalpy, and heat capacity relationships using well-known amines as reference are used to correlate the standard reference state properties of ionic species with those of molecular species in the electrolyte system, which has been approved to provide a reliable and consistent way to estimate required parameters when there is minimal or no appropriate experimental data available. Here, the proposed relationships have been applied to the development of an electrolyte nonrandom two liquid (NRTL) activity coefficient model for CO 2 absorption in aqueous 1-amino-2-propanol (A2P) solution, as an example to demonstration the methodology. With limited vapor–liquid equilibrium data and other thermodynamic properties, the parameters in the electrolyte NRTL model are identified with good accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Penetration of foliar-applied Zn and its impact on apple plant nutrition status: in vivo evaluation by synchrotron-based X-ray fluorescence microscopy

The absorption of foliar fertilizer is a complex process and is poorly understood. The ability to visualize and quantify the pathway that elements take following their application to leaf surfaces is critical for understanding the science and for practical applications of foliar fertilizers. By the use of synchrotron-based X-ray fluorescence to analyze the in vivo localization of elements, our study aimed to investigate the penetration of foliar-applied Zn absorbed by apple leaves with different physiological surface properties, as well as the possible interactions between foliar Zn level and the mineral nutrient status of treated leaves. The results indicate that the absorption of foliar-applied Zn was largely dependent on plant leaf surface characteristics. High-resolution elemental maps revealed that the high binding capacity of the cell wall for Zn contributed to the observed limitation of Zn penetration across epidermal cells. Trichome density and stomatal aperture had opposite effects on Zn fertilizer penetration: a relatively high density of trichomes increased the hydrophobicity of leaves, whereas the presence of stomata facilitated foliar Zn penetration. Low levels of Zn promoted the accumulation of other mineral elements in treated leaves, and the complexation of Zn with phytic acid potentially occurred owing to exposure to high-Zn conditions. The present study provides direct visual evidence for the Zn penetration process across the leaf surface, which is important for the development of strategies for Zn biofortification in crop species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Modeling laser interactions with aluminum and tantalum targets using a hybrid atomistic-continuum model

A hybrid atomistic-continuum method can model the microstructure evolution of metals subjected to laser irradiation. This method combines classical molecular dynamics (MD) simulations with the two-temperature model (TTM) to account for the laser energy absorption and heat diffusion behavior. Accurate prediction of the temperature evolution in the combined MD-TTM method requires reliable accuracy in electron heat capacity, electron thermal conductivity, and electron–phonon coupling factor across the temperatures generated. This study uses the electronic density of states (DOS) obtained from first-principle calculations. The calculated electron temperature-dependent parameters are used in MD-TTM simulations to study the laser metal interactions in FCC and BCC metals and the phenomenon of laser shock loading and melting. This study uses FCC Al and BCC Ta as model systems to demonstrate this capability. When subjected to short pulsed laser shocks, the dynamic failure behavior predicted using temperature-dependent parameters is compared with the experimentally reported single-crystal and nanocrystalline Al and Ta systems. The MD-TTM simulations also investigate laser ablation and melting behavior of Ta to compare with the ablation threshold reported experimentally. In conclusion, this manuscript demonstrates that integrating the temperature-dependent parameters into MD-TTM simulations leads to the accurate modeling of the laser–metal interaction and allows the prediction of the kinetics of the solid–liquid interface.

36 MATERIALS SCIENCE↗
NASA NTRS1984

The effect of direct and reflected radiation on the temperatures of space structures

As an orbiting structure passes from the bright side to the dark side of the earth, substantial differences in surface heating may take place due to direct sunlight and albedo. Most structures are built of convex curved elements to spread out the reflected energy. A change in the shortwave absorptivity and emissivity maintains the temperature of electronic components within a narrow range. Temperature extremes may also be reduced by the use of thermal capacity of the system or by shielding the surface from direct sunlight. For an instrument deployed from a Shuttle, a temperature must be established for it in the cargo bay before deployment. The effect of obstructed views by surfaces such as the Shuttle arm complicates solar flux computations because of the object's mobility. For typical orbits, the earth's albedo and the direct long wavelength radiation may be as much as 30 percent of the direct solar flux. Irradiation due to direct and reflected solar, long wave radiation and reflected radiation from earth, and from Shuttle surfaces is largely dependent on the specular reflection from the radiators as the Shuttle rolls and its surfaces block the sun. Through a judicious choice of surface properties, thermal capacitance and orbit attitude programming, the temperature response of a system can be controlled.

Emery, A. F.↗
NASA NTRS2015

Heat Capacity and Thermal Conductance Measurements of a Superconducting-Normal Mixed State by Detection of Single 3 eV Photons in a Magnetic Penetration Thermometer

We report on measurements of the detected signal pulses in a molybdenum-gold Magnetic Penetration Thermometer (MPT) in response to absorption of one or more 3 eV photons. We designed and used this MPT sensor for x-ray microcalorimetry. In this device, the diamagnetic response of a superconducting MoAu bilayer is used to sense temperature changes in response to absorbed photons, and responsivity is enhanced by a Meissner transition in which the magnetic flux penetrating the sensor changes rapidly to minimize free energy in a mixed superconducting normal state. We have previously reported on use of our MPT to study a thermal phonon energy loss to the substrate when absorbing x-rays. We now describe results of extracting heat capacity C and thermal conductance G values from pulse height and decay time of MPT pulses generated by 3 eV photons. The variation in C and G at temperatures near the Meissner transition temperature (set by an internal magnetic bias field) allow us to probe the behavior in superconducting normal mixed state of the condensation energy and the electron cooling power resulting from quasi-particle recombination and phonon emission. The information gained on electron cooling power is also relevant to the operation of other superconducting detectors, such as Microwave Kinetic Inductance Detectors.

superconductivity↗
DOE OSTI2023

Toward Complete Transformation of Sodium Polysulfides by Regulating the Second–Shell Coordinating Environment of Atomically Dispersed Fe

Room temperature sodium-sulfur (RT Na-S) batteries are highly competitive as potential energy storage devices. Nevertheless, their actually achieved reversible capacities are far below the theoretical value due to incomplete transformation of polysulfides. Herein, atomically dispersed Fe-N/S active center by regulating the second-shell coordinating environment of Fe single atom is proposed. The Fe–N 4 S 2 coordination structure with enhanced local electronic concentration around the Fermi level is revealed via synchrotron radiation X-ray absorption spectroscopy (XAS) and theoretical calculations, which can not only significantly promote the transformation kinetics of polysulfides, but induce uniform Na deposition for dendrite-free Na anode. As a result, the obtained S cathode delivers a high initial reversible capacity of 1590 mAh g –1 , nearly the theoretical value. Finally, this work opens up a new avenue to facilitate the complete transformation of polysulfides for RT Na-S batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Toward Complete Transformation of Sodium Polysulfides by Regulating the Second-Shell Coordinating Environment of Atomically Dispersed Fe

Room temperature sodium-sulfur (RT Na-S) batteries are highly competitive as potential energy storage devices. Nevertheless, their actually achieved reversible capacities are far below the theoretical value due to incomplete transformation of polysulfides. Herein, atomically dispersed Fe-N/S active center by regulating the second-shell coordinating environment of Fe single atom is proposed. The Fe-N4S2 coordination structure with enhanced local electronic concentration around the Fermi level is revealed via synchrotron radiation X-ray absorption spectroscopy (XAS) and theoretical calculations, which can not only significantly promote the transformation kinetics of polysulfides, but induce uniform Na deposition for dendrite-free Na anode. Here as a result, the obtained S cathode delivers a high initial reversible capacity of 1590 mAh g-1, nearly the theoretical value. Here this work opens up a new avenue to facilitate the complete transformation of polysulfides for RT Na-S batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Approaching theoretical specific capacity of iron-rich lithium iron silicate using graphene-incorporation and fluorine-doping

Lithium iron silicate, Li 2 FeSiO 4 , is a promising cathode material for lithium ion batteries due to its high theoretical specific capacity, earth abundance, low cost, and environmental friendliness. The challenges of Li 2 FeSiO 4 as a practical cathode material are (1) the low electronic and ionic conductivity and (2) the low discharge voltage. The approach of incorporating graphene sheets into the nanostructure of Li 2 FeSiO 4 is used for dealing with the low conductivities while fluorine doping is intended to increase the discharge voltage. The fluorine-doped and graphene-incorporated iron-rich lithium iron silicate F-LFSO/G nanomaterials were successfully synthesized using a facile/efficient hydrothermal method with excellent performance, 328.43 mA h g -1 at 0.1C rate, approaching their theoretical specific capacity, 99% of 331 mA h g -1 . This clearly reveals that the reversible (de)lithiation of 2 Li + ions per F-LFSO has been realized as a result of these approaches. The (de)lithiation process has been studied using in operando high energy synchrotron X-ray absorption near edge spectroscopy and X-ray photoelectron spectroscopy aided by theoretical modeling, which reveals that F doping deeply changes the O electron configuration in F-LFSO, and consequently makes the Li + ion transfer easier, while the reversible redox of oxygen can be utilized to achieve high specific capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

X-ray Absorption Spectroscopy Illustrates the Participation of Oxygen in the Electrochemical Cycling of Li 4 Mn 2 O 5

A combination of oxygen redox and Mn-based oxides would be the best option for high-energy-density Li-ion batteries crucial for a sustainable society. The disordered rock-salt Li 4 Mn 2 O 5 was recently reported to display a very large capacity of 460 mAh/g with moderate reversibility. Previous studies proposed the involvement of lattice oxygen redox in such intriguing electrochemical performance, whereas no direct evidence was presented. To clarify the charge compensation mechanism, we systematically investigated the evolution of the electronic structure of both Mn and O upon cycling via Mn/OK-edge X-ray absorption spectroscopy (XAS). Mn K-edge XAS unequivocally demonstrates the participation of Mn redox upon the initial stages of charging, yet changes are arrested at the high potentials, while O continues to evolve according to O K-edge XAS. Upon discharging, both Mn and O are simultaneously reduced, but to states different from pristine. In conclusion, the results highlight the significance of a disordered structure in maintaining the reversible redox chemistry of both transition metals and oxygen to design cathode materials with high energy density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Location-Dependent Cobalt Deposition in Smartphone Cells upon Long-Term Fast-Charging Visualized by Synchrotron X-ray Fluorescence

In this work, we investigate the transition-metal dissolution of the layered cathode material LiCoO 2 upon repeated fast-charging of three smartphone batteries from different manufacturers using synchrotron micro X-ray fluorescence (μ-XRF). Using this spatially resolved technique, dissolution of Co and subsequent location-dependent deposition on the anode are observed. μ-XRF mapping of selected parts of the anode electrode sheets, such as electrode folds and edges of the jelly roll, reveals the difference in the way Co is deposited on specific regions of the anode electrode. While some folds show no depositions, edges of the anode show gradually accumulating Co depositions. Furthermore, careful quantification of the dissolved Co reveals that the capacity loss scales with the amount of deposited Co on the anode, that is, total Co loss from within the cathode. Soft X-ray absorption spectroscopy of the Co depositions on the anode shows that Co is mainly deposited in a reduced 2 + state. While optimization of the fast-charging protocol mitigates Li plating on the anode, no significant difference in the amount of deposited Co can be observed between an optimized and a nonoptimized fast-charging algorithm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A General Binary Isotherm Model for Amines Interacting with CO 2 and H 2 O

CO 2 capture by primary or secondary amines has been of great research interests for a century because of its industrial importance. Interest has grown even more, because of the need to eliminate the CO 2 emissions that drive global warming. Experimental evidence shows that CO 2 sorption in primary or secondary amines is accompanied by co-absorption of H 2 O. A quantitative analysis of such CO 2 -H 2 O co-absorption behavior is important for practical process design and theoretical understanding. Even though there is almost an experimental consensus that water enhances CO 2 uptake capacity, an analytic model to explain this phenomenon is not well established. Instead, some empirical models such as the Toth model are used to describe the isotherm without accounting for the presence of water. Recently, we have demonstrated that the isotherm equation of CO 2 sorption into strong-base anion exchange materials with quaternary ammonium can be derived from that of strong-base aqueous alkaline solutions by correcting for the drastic change in water activity and by including an appropriate parameterization of the water activity terms. In this paper, we generalize this model from quaternary ammonium to primary, secondary and tertiary amines either in solutions or as functional groups in polymer resins. For primary, secondary and tertiary amines, the isotherm equation can be derived by extending that of a weak-base aqueous alkaline solution such as aqueous ammonia. The model has been validated using experimental data of aqueous ammonia in literature. Furthermore, this general model even includes quaternary ammonium as a special limit. Hence, this general model offers a platform that can treat the isotherms of solid amines, aqueous amines and aqueous alkaline solutions in a unified way.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

In Situ Synthesis of Graphene-Coated Silicon Monoxide Anodes from Coa-Derived Humic Acid for High-Performance Lithium-Ion Batteries

Silicon monoxide (SiO) is attaining extensive interest amongst silicon-based materials due to its high capacity and long cycle life; however, its low intrinsic electrical conductivity and poor coulombic efficiency strictly limit its commercial applications. Here low-cost coal-derived humic acid (HA) is used as a feedstock to synthesize in-situ graphene-coated disproportionated SiO (D-SiO@G) anode with a facile method. HRTEM and XRD confirm the well-coated graphene layers on an SiO surface. Scanning Transmission X-ray Microscopy (STXM) and X-ray Absorption Near-Edge Structure (XANES) spectra analysis indicate that the graphene coating effectively hinders the side-reactions between the electrolyte and SiO particles . As a result, the D-SiO@G anode presents an initial discharge capacity of 1937.6 mAh g -1 at 0.1 A g -1 and an initial coulombic efficiency (ICE) of 78.2%. High reversible capacity (1023 mAh g -1 at 2.0 A g -1 ), excellent cycling performance ( 72.4% capacity retention after 500 cycles at 2.0 A g -1 ), and rate capability (774 mAh g -1 at 5 A g -1 ) results are substantial. Full coin cells assembled with LiFePO 4 electrodes and D-SiO@G electrodes display impressive rate performance. These results indicate a promising potential for practical use in high-performance lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Reduction of Exciton Diffusion Length with Genetically Tuned Non-Photochemical Quenching in Plant Thylakoid Membranes

Non-photochemical quenching (NPQ) protects plants from excess light by dissipating excitation energy as heat. Limited exciton migration is a key feature of NPQ, reducing the energy flux to reaction centers; however, quantitative evidence for this mechanism in native thylakoid membranes has been lacking. Here, we investigate the correlation between NPQ activity and exciton diffusion length (LD) using Nicotiana benthamiana mutants with distinct NPQ capacities. NPQ under both light- and dark-acclimated conditions was quantified for each genotype via fluorescence lifetime snapshots, and exciton mobility was probed using transient absorption spectroscopy with exciton-exciton annihilation analysis. By comparing the relationship between chlorophyll fluorescence lifetime and LD across mutants, we observed that NPQ activation quantitatively limits the spatial range of exciton migration, thereby reducing the access to reaction centers. Our findings provide direct experimental evidence that NPQ modulates the dynamics of energy transport, advancing our understanding of photoprotective regulation in photosynthetic systems.

Diffusion↗
DOE OSTI2020

Metal-Organic Framework Glasses as Rad Contaminant Sequesters and Nuclear Waste Forms

Remediation of Tc remains an unresolved problem at SRS and other DOE sites. The objective of this project was to develop novel metal organic framework (MOF) glasses for radioactive contaminant sequestration and stabilization from aqueous media. During FY20, we synthesized, characterized and evaluated additional cetyltrimethylcimmonium bromide (CTAB)-functionalized and F - , Cl - , I - , CF 3 SO 3 - exchanged MIL-101-Cr samples. MIL-10l-Cr-NO 3 -CTAB was demonstrated to have high ReO 4 - removed capacity (139 mg/g sorbent) from artificial groundwater (AGW). Re chemical specicition and binding mechanism on MIL-101-CTAB were also studied by synchrotron X-ray absorption spectroscopy. ReO 4 - was demonstrated as being in the pore structure with slightly larger Re-O bond distances than those in NciReO 4 and binding with the positively charged sites of CTAB. In addition, a new Ni-TIPA MOF was demonstrated to be very stable, selective and effective for TcO 4 - removed from the SRS tank waste stream (~90% removed). The Ni-TIPA MOF sample containing ReO 4 - was prepared and shipped/planned for vitrification studies by a high-pressure technique. This research may provide a highly applicable platform for solving critical DOE and industrial problems related to nuclear environmental stewardship and nuclear power production.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

In Situ ATR-FTIR Study of the Cathode–Electrolyte Interphase: Electrolyte Solution Structure, Transition Metal Redox, and Surface Layer Evolution

We present a study of the lithium nickel manganese cobalt oxide (LiNi 0.6 Mn 0.2 Co 0.2 O 2 , NMC622) cathode-electrolyte interphase (CEI) during galvanostatic charging and discharging using in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) methods to investigate the voltage dependent electrolyte solution structure changes at the interface, transition metal (TM) redox chemistry, and cathode/electrolyte interfacial layer evolution. Furthermore, our in situ cell design provides both reliable electrochemical device testing and strong FTIR vibrational absorption signals near the cathode surface. Specifically, advanced spectral analysis elucidates changes of near-surface Li+ ion (de)solvation by solvent molecules during galvanostatic cycling. Moreover, cathode metal-oxygen vibrational absorptions, sensitive to TM redox behaviors and subsequent local structural variations, were correlated to cathode de-lithiation (and lithiation) and electrolyte solution structure changes. In addition, we have detected the formation and evolution of a CEI surface layer on the NMC622 cathode that contributes to the cell's capacity fade.

25 ENERGY STORAGE↗