SEARCH · Search NASA

Results for “Accelerator Driven Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Data-driven prediction of battery cycle life before capacity degradation

Accurately predicting the lifetime of complex, nonlinear systems such as lithium-ion batteries is critical for accelerating technology development. However, diverse aging mechanisms, significant device variability and dynamic operating conditions have remained major challenges. We generate a comprehensive dataset consisting of 124 commercial lithium iron phosphate/graphite cells cycled under fast-charging conditions, with widely varying cycle lives ranging from 150 to 2,300 cycles. Using discharge voltage curves from early cycles yet to exhibit capacity degradation, we apply machine-learning tools to both predict and classify cells by cycle life. Our best models achieve 9.1% test error for quantitatively predicting cycle life using the first 100 cycles (exhibiting a median increase of 0.2% from initial capacity) and 4.9% test error using the first 5 cycles for classifying cycle life into two groups. This work highlights the promise of combining deliberate data generation with data-driven modelling to predict the behaviour of complex dynamical systems.

25 ENERGY STORAGE↗

NASA NTRS2023

Top‐Down Regulation by a Reindeer Herding System Limits Climate‐Driven Arctic Vegetation Change at a Regional Scale

Warming-driven growth of tall woody vegetation in the Arctic has the potential to accelerate climate change through multiple positive feedbacks. Local-scale evidence suggests that large herbivores limit this vegetation shift, but there is uncertainty at larger, regional scales whether current herbivory pressure is a major top-down control on ecosystem structure and functioning. Across a 67,000 km2 region of the Yamal Peninsula in West Siberia, we integrated satellite remote sensing with a novel data set mapping the migrations of herds comprising 151,000 domesticated reindeer. Where reindeer numbers varied over space, higher reindeer herbivory pressure was consistently linked with lower coverage of tall woody vegetation. Within areas dominated by this vegetation type, productivity and climate were increasingly decoupled where reindeer density was higher. Our spaceborne fingerprint detection suggests that large herbivores, at current population densities, counteract Arctic vegetation responses to climate change over large spatial scales.

Reindeer Herding System↗

DOE OSTI2015

Positron generation using laser-wakefield electron sources

Positron generation, using wakefield-accelerated electrons driven into a converter target, was investigated experimentally and through Monte Carlo simulations. Using experimentally measured initial electron distributions from a 60 fs laser system, modeling shows that a collimated wakefield electron beam of moderate energy (50–200 MeV) produces a large number of positrons (~10 7 ), which are emitted from the rear of a mm-scale, high-Z target with divergence angles between 50 and 150 mrad. The large perpendicular momentum of the positrons was found to be dominated by contributions from multiple small angle Coulomb scattering. Positrons were not observed above background noise for a range of targets where simulations indicate a 5–30× increase in the beam charge was necessary to exceed threshold detection. These results provide new understanding to the fundamental limitations of creating narrow-divergence, high-density positron beams from laser-wakefield platforms for use in future laboratory pair plasma experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2016

Optimization of SHINE Process: Design and Verification of Plant-Scale AG 1 Anion-Exchange Concentration Column and Titania Sorbent Pretreatment

Argonne National Laboratory has developed a Mo-recovery and -purification system for the SHINE medical technologies process, which uses a uranyl sulfate solution for the accelerator-driven production of Mo-99. The objective of this effort is to reduce the processing time for the acidification of the Mo-99 product prior to loading onto a concentration column and concentration of the Mo-99 product solution. Two methods were investigated: (1) the replacement of the titania concentration column by an anion-exchange column to decrease processing time and increase the radioiodine-decontamination efficiency and (2) pretreatment of the titania sorbent to improve its effectiveness for the Mo-recovery and -concentration columns. Promising results are reported for both methods.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

NASA NTRS2015

Design and Testing of a Small Inductive Pulsed Plasma Thruster

The design and testing of a small inductive pulsed plasma thruster (IPPT), shown in Fig. 1 with all the major subsystems required for a thruster of this kind are described. Thrust measurements and imaging of the device operated in rep-rated mode are presented to quantify the performance envelope of the device. The small IPPT described in this paper was designed to serve as a test-bed for the pulsed gas-valves and solid-state switches required for a IPPTs. A modular design approach was used to permit future modifications and upgrades. The thruster consists of the following sub-systems: a) a multi-turn, spiral-wound acceleration coil (27 cm o.d., 10 cm i.d.) driven by a 10 microFarad capacitor and switched with a high-voltage thyristor, b) a fast pulsed gas-valve, and c.) a glow-discharge pre-ionizer (PI) circuit. The acceleration-coil circuit may be operated at voltages up to 4 kV (the thyristor limit is 4.5 kV). The device may be operated at rep-rates up to 30 Hz with the present gas-valve. Thrust measurements and imaging of the device operated in rep-rated mode will be presented. The pre-ionizer consists of a 0.3 microFarad capacitor charged to 4 kV and connected to two annular stainless-steel electrodes bounding the area of the coil-face. The 4 kV potential is held across them and when the gas is puffed in over the coil, the PI circuit is completed, and a plasma is formed. Even at the less than optimal base-pressure in the chamber (approximately 5 × 10(exp −4) torr), the PI held-off the applied voltage, and only discharged upon command. For a capacitor charge of 2 kV the peak coil current is 4.1 kA, and during this pulse a very bright discharge (much brighter than from the PI alone) was observed (see Fig. 2). Interestingly, for discharges at this charge voltage the PI was not required as the current rise rate, dI/dt, of the coil itself was sufficient to ionize the gas.

Martin, Adam K.↗

NASA NTRS2023

NASA’s Digital Information Platform to Accelerate the Transformation of the National Airspace System

In order to accelerate the digital transformation of airspace operations, a foundational framework and infrastructure for providing sustainable, data-driven, and cohesive decision-making digital services for both traditional and emergent air vehicles is being developed. The reference implementation of Digital Information Platform builds an ecosystem for the aviation community by providing access to a secure and trusted source of aviation data and services. Several key features and services have been implemented to enable secure data sharing, communication, and service registration on the Platform. The technical approach used to implement these features is presented here. NASA-developed integrated aviation data and machine learning based prediction services to optimize airspace operations are available on the Platform. These services are being evaluated in an operational environment by flight operators and the real-world benefits are being captured. The Platform fosters collaboration among industry and researchers to develop complex aviation services and the aim is to make it publicly accessible for consumption by the aviation community.

Digital Transformation↗

NASA NTRSDate not supplied

NASA’s Digital Information Platform to Accelerate the Transformation of the National Airspace System

Digital Transformation↗

DOE OSTI2013

SIMULATIONS OF DISK GALAXIES WITH COSMIC RAY DRIVEN GALACTIC WINDS

We present results from high-resolution hydrodynamic simulations of isolated Small Magellanic Cloud (SMC)- and Milky-Way-sized galaxies that include a model for feedback from galactic cosmic rays (CRs). We find that CRs are naturally able to drive winds with mass loading factors of up to ∼10 in dwarf systems. The scaling of the mass loading factor with circular velocity between the two simulated systems is consistent with η∝v{sub circ}{sup 1-2} required to reproduce the faint end of the galaxy luminosity function. In addition, simulations with CR feedback reproduce both the normalization and the slope of the observed trend of wind velocity with galaxy circular velocity. We find that winds in simulations with CR feedback exhibit qualitatively different properties compared to supernova-driven winds, where most of acceleration happens violently in situ near star forming sites. The CR-driven winds are accelerated gently by the large-scale pressure gradient established by CRs diffusing from the star-forming galaxy disk out into the halo. The CR-driven winds also exhibit much cooler temperatures and, in the SMC-sized system, warm (T ∼ 10{sup 4} K) gas dominates the outflow. The prevalence of warm gas in such outflows may provide a clue as to the origin of ubiquitous warm gas in the gaseous halos of galaxies detected via absorption lines in quasar spectra.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Investigation of the Microquasar SS 433 with VERITAS

Microquasars such as SS 433 are considered potential contributors to cosmic rays up to the knee of the cosmic-ray energy spectrum (∼4 PeV), where a transition in the dominant acceleration processes is expected. The SS 433 system, located within the W50 supernova remnant, is a Galactic microquasar with relativistic jets interacting with the surrounding medium over parsec scales, providing an example for studying jet-driven particle acceleration. A deep morphological and spectral study of SS 433 is performed using more than 150 hr of observations with VERITAS, sensitive to γ-ray energies >100 GeV. With an angular resolution better than 0$^°_.$1, extended TeV γ-ray emission is resolved from both the eastern and western jet lobes, located tens of parsecs from the central binary. The emission appears elongated along the jet axis and coincides with regions where the jets interact with the surrounding supernova remnant. No TeV emission is detected from the central binary, nor is significant emission observed between the central binary and the jet lobes. Phase-resolved analyses show no evidence for variability in the orbital or precessional phase, supporting a steady emission scenario. The observed morphology and spectra are consistent with scenarios where particles are accelerated in the lobes of the jets, possibly through shocks or alternative processes such as magnetic reconnection. The extended TeV emission from the jet lobes of SS 433 favors a leptonic origin in the VERITAS energy range, suggesting that any hadronic acceleration is subdominant. The results offer valuable constraints on how microquasar jets may contribute to the Galactic cosmic-ray population toward the knee.

Archer, A. [DePauw University, Greencastle, IN (Un↗

DOE OSTI2026

Finding the perfect imperfection: Accelerated, computationally driven discovery and design of quantum defects

Optically addressable spin defects have emerged as the leading platforms for quantum sensing and communication in solid-state systems. While traditional efforts have concentrated on a focused set of well-studied defects, recent advances in high-throughput computational methods have shown promise for large-scale exploration of defects across diverse semiconductor hosts. By cataloging key properties of quantum defects in computational databases, high-throughput screening techniques can systematically suggest and design novel candidates. In this article, we highlight recent advances in data-driven quantum defect design aimed at addressing critical materials science challenges such as host materials selection, defect stability, and desirable electronic and optical properties. Here, we emphasize the importance of electronic-structure-guided searches across various materials and illustrate how high-throughput computations contribute to our understanding of design principles for quantum defects. Additionally, we outline ongoing challenges and emerging opportunities in this rapidly developing field.

Xiong, Yihuang [Dartmouth College, Hanover, NH (Un↗

NASA NTRS2001

Coupled Growth in Hypermonotectics

The overall objective of this project is to obtain a fundamental understanding of the physics controlling solidification processes in immiscible alloy systems. The investigation involves both experimentation and the development of a model describing solidification in monotectic systems. The experimental segment was designed to first demonstrate that it is possible to obtain interface stability and steady state coupled growth in hypermonotectic alloys through microgravity processing. Microgravity results obtained to date have verified this possibility. Future flights will permit experimental determination of the limits of interface stability and the influence of alloy composition and growth rate on microstructure. The objectives of the modeling segment of the investigation include prediction of the limits of interface stability, modeling of convective flow due to residual acceleration, and the influence of surface tension driven flows at the solidification interface. The study of solidification processes in immiscible alloy systems is hindered by the inherent convective flow that occurs on Earth and by the possibility of sedimentation of the higher density immiscible liquid phase. It has been shown that processing using a high thermal gradient and a low growth rate can lead to a stable macroscopically planar growth front even in hypermonotectic alloys. Processing under these growth conditions can avoid constitutional supercooling and prevent the formation of the minor immiscible liquid phase in advance of the solidification front. However, the solute depleted boundary layer that forms in advance of the solidification front is almost always less dense than the liquid away from the solidification front. As a result, convective instability is expected. Ground based testing has indicated that convection is a major problem in these alloy systems and leads to gross compositional variations along the sample and difficulties maintaining interface stability. Sustained low gravity processing conditions are necessary in order to minimize these problems and obtain solidification conditions which approach steady state.

Andrews, J. Barry↗

DOE OSTI2025

The Future of a Myriad of Accelerated Biodiscoveries Lies in AI‐Powered Mass Spectrometry and Multiomics Integration

The intersection of modern artificial intelligence (AI) and mass spectrometry (MS) is set to transform the MS‐based “omics” research fields, particularly proteomics, metabolomics, lipidomics, and glycomics, enabling advancements across a wide range of domains, from health to environment and industrial biotechnology. Beginning with an overview of key challenges inherent in MS software pipelines, this personal perspective explores how AI‐driven solutions can address them to enhance data processing, integration and interpretation. It proposes a paradigm shift in molecular identification and quantitation algorithms, leveraging AI to enable holistic interpretation of MS‐based multiomics data. While centered on MS‐based omics, this holistic AI‐driven paradigm is also critical for connecting dynamic biochemical changes to genomics and transcriptomics contexts, reinforcing the integrative value of MS in multiomics research. Ultimately, this AI‐driven approach could enhance efficiency, accuracy, and molecular breadth of coverage, deepening our systems‐level understanding of biological processes and accelerating a myriad of biodiscoveries.

47 OTHER INSTRUMENTATION↗

DOE OSTI2019

Gaussian-Process-Driven Adaptive Sampling for Reduced-Order Modeling of Texture Effects in Polycrystalline Alpha-Ti

Data-driven tools for finding structure–property (S–P) relations, such as the Materials Knowledge System (MKS) framework, can accelerate materials design, once the costly and technical calibration process has been completed. In this paper, a three-model method is proposed to reduce the expense of S–P relation model calibration: (1) direct simulations are performed as per (2) a Gaussian process-based data collection model, to calibrate (3) an MKS homogenization model in an application to α-Ti. The new methods are compared favorably with expert texture selection on the performance of the so-calibrated MKS models. Benefits for the development of new and improved materials are discussed.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Instabilities and phase transitions in architected metamaterials: a gradient-enhanced continuum approach

Architected metamaterials such as foams and lattices exhibit a wide range of properties governed by microstructural instabilities and emerging phase transitions. Their macroscopic response–including energy dissipation during impact, large recoverable deformations, morphing between configurations, and auxetic behavior–remains difficult to capture with conventional continuum models, which often rely on discrete approaches that limit scalability. In this work, we propose a nonlocal continuum formulation that captures both stable and unstable responses of elastic architected metamaterials. The framework extends anisotropic hyperelasticity by introducing nonlocal variables and internal length scales reflective of microstructural features. Local polyconvex free-energy models are systematically augmented with two families of non-(poly)convex energies, enabling both metastable and bistable responses. Implementation in a finite element framework enables solution using a hybrid monolithic–staggered strategy. Simulations capture densification fronts, forward and reverse transitions, hysteresis loops, imperfection sensitivity, and globally coordinated auxetic modes. Overall, this framework provides a robust foundation for accelerated modeling of instability-driven phenomena in architected metamaterials, while enabling extensions to anisotropic, dissipative, and active systems as well as integration with data-driven and machine learning approaches.

42 ENGINEERING↗

DOE OSTI2026

Machine Learning for Mapping Multipactor Susceptibility in RF Systems: Capabilities and Generalization Constraints

Multipactor is a surface-driven electron avalanche phenomenon that degrades the performance and reliability of radio-frequency (RF) systems in particle accelerator and vacuum electronics applications. Multipactor behavior in a given device structure is conventionally assessed through susceptibility charts, which provide a parameter-space characterization of the instability. In this work, we assess the capabilities of machine-learning (ML) models to learn and predict such susceptibility charts and analyze the constraints governing their generalization across materials. Using a simulation-derived dataset spanning six distinct secondary-electron-yield material profiles in a canonical two-surface planar geometry, we train supervised regression models and artificial neural networks to predict the time-averaged electron growth rate, δavg, across the relevant parameter space. Model performance is evaluated using metrics that explicitly probe the structure of susceptibility charts, including Intersection over Union, Structural Similarity Index, and correlation analysis. Tree-based ensemble models outperform neural-network models in reconstructing susceptibility regions and in generalizing across material domains. Principal-component analysis reveals disjoint material feature distributions, indicating that the piecewise mode structure of multipactor susceptibility is difficult to represent with a single global model and that generalization is constrained by data coverage rather than by model complexity. An exhaustive reduced-coverage study further shows that sparse material-space coverage can yield mean performance in the same general range but producing large variability in the susceptibility-region overlap. These results clarify the capabilities of ML-based surrogate models for parameter-space characterization of multipactor discharge. They also provide guidance for their appropriate use in RF system design.

43 PARTICLE ACCELERATORS↗

DOE OSTI2022

Exploring the Use of Novel Spatial Accelerators in Scientific Applications

Driven by the need to find alternative accelerators which can viably replace GPUs in next-generation Supercomputing systems, this paper proposes a methodology to enable agile application/hardware co-design. The application-first methodology provides the ability to come up with design of accelerators while working with real-world workloads, available accelerators, and system software. The iterative design process targets a set of kernels in a workload for performance estimates that can prune the design space for later phases of detailed architectural evaluations. To this effect, in this paper, a novel data-parallel device model is introduced that simulates the latency of performance-sensitive operations in an accelerator including data transfers and kernel computation using multi-core CPUs. The use of off-the-shelf simulators, such as pre-RTL simulator Aladdin or multiple tools available for exploring the design of deep neural network accelerators (e.g., Timeloop) is demonstrated for evaluation of various accelerator designs using applications with realistic inputs. Examples of multiple device configurations that are instantiable in a system are explored to evaluate the performance benefit of deploying novel accelerators. The proposed device is integrated with a programming model and system software to potentially explore the impacts of high-level programming languages/compilers and low-level effects such as task scheduling on multiple accelerators. We analyze our methodology for a set of applications that represent high-performance computing (HPC) and graph analytics. The applications include a computational chemistry kernel realized using tensor contractions, triangle counting, GraphSAGE and Breadth-first Search. These applications include kernels such as dense matrix-dense matrix multiplication, sparse matrix-spare matrix multiplication, and sparse matrix-dense vector multiplication. Our results indicate potential performance benefits and insights for system design by including accelerators that realize these kernels along-side general purpose accelerators.

AI, codesign, Accelerated Computing, Modeling and ↗

NASA NTRS1979

Fluid behavior in low g

Several experiments and a number of demonstrations were performed during Skylab to elucidate the behavior of fluids in space. The purposes of these experiments were to confirm hypotheses on how systems would behave in a low-g environment, determine to what extent residual accelerations and nongravity-driven convection affected processes, and provide graphic demonstrations of fluid behavior in space for classroom use and to stimulate new ideas for low-g research.

Source record↗

NASA NTRS1994

Vibration Isolation Technology (VIT) ATD Project

A fundamental advantage for performing material processing and fluid physics experiments in an orbital environment is the reduction in gravity driven phenomena. However, experience with manned spacecraft such as the Space Transportation System (STS) has demonstrated a dynamic acceleration environment far from being characterized as a 'microgravity' platform. Vibrations and transient disturbances from crew motions, thruster firings, rotating machinery etc. can have detrimental effects on many proposed microgravity science experiments. These same disturbances are also to be expected on the future space station. The Microgravity Science and Applications Division (MSAD) of the Office of Life and Microgravity Sciences and Applications (OLMSA), NASA Headquarters recognized the need for addressing this fundamental issue. As a result an Advanced Technology Development (ATD) project was initiated in the area of Vibration Isolation Technology (VIT) to develop methodologies for meeting future microgravity science needs. The objective of the Vibration Isolation Technology ATD project was to provide technology for the isolation of microgravity science experiments by developing methods to maintain a predictable, well defined, well characterized, and reproducible low-gravity environment, consistent with the needs of the microgravity science community. Included implicitly in this objective was the goal of advising the science community and hardware developers of the fundamental need to address the importance of maintaining, and how to maintain, a microgravity environment. This document will summarize the accomplishments of the VIT ATD which is now completed. There were three specific thrusts involved in the ATD effort. An analytical effort was performed at the Marshall Space Flight Center to define the sensitivity of selected experiments to residual and dynamic accelerations. This effort was redirected about half way through the ATD focusing specifically on the sensitivity of protein crystals to a realistic orbital environment. The other two thrusts of the ATD were performed at the Lewis Research Center. The first was to develop technology in the area of reactionless mechanisms and robotics to support the eventual development of robotics for servicing microgravity science experiments. This activity was completed in 1990. The second was to develop vibration isolation and damping technology providing protection for sensitive science experiments. In conjunction with the this activity, two workshops were held. The results of these were summarized and are included in this report.

Lubomski, Joseph F.↗