SEARCH · Search NASA

Results for “Additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Aluminum addition to AISI 52100 steel: Initial assessment on impact to mechanical properties and tribological performance and pathways for improvement

Here, in the transportation industry, reducing component weight is an effective strategy to improve fuel efficiency and lower emissions. Martensitic AISI 52100 steel is commonly used in drivetrain bearing components due to its high strength and excellent tribological performance. To achieve lightweighting without sacrificing mechanical properties and tribological behavior, this study explored the 52100 steel alloy modified by introducing nominally 5 wt% aluminum. The addition of aluminum led to an approximately 6% density reduction, however, it resulted in reduced hardness, strength and wear resistance, in part due to stabilization of a substantial amount of ferrite, as suggested by microstructural examination. Introducing 0.15 wt% additional carbon reduced the ferrite and demonstrated feasibility of mitigating the mechanical and tribological degradation caused by aluminum. This case study provides fundamental insights into the balance between lightweighting and mechanical/tribological performance for steel alloys, serving as a reference for further development of lightweight bearing steels.

Aluminum addition↗

DOE OSTI2025

Single-Ion Conducting Polymer Electrolyte Enabled via Aza-Michael Addition

Single-ion conducting polymer electrolytes present a possible route for achieving high energy density next-generation batteries due to their flexible nature and high cation transport number. The trifluoromethanesulfonimide (TFSI) functional group represents one of the most efficient tethered anions for Li-ion conductivity. However, the covalent attachment of TFSI groups into polymer electrolytes has been challenging and costly due to its synthetic difficulty and limited commercial availability of building blocks. Here, we present a new polymer electrolyte synthesized by the Michael addition reaction between poly(allylamine) (PAA) and a vinyl TFSI anion under mild reaction conditions. The resulting PAATFSI exhibits a lower glass transition temperature and several orders of magnitude higher Li-ion conductivity than similar TFSI-based single-ion conducting homopolymers in the dry state. Moreover, PAATFSI exhibits excellent Li-ion conductivity (2.7 × 10 –4 S/cm at 30 °C) with the addition of a plasticizer (60 wt % of carbonate solvent), which enables stable lithium–metal battery performance. In conclusion, this study demonstrates a facile route for the synthesis of new single-ion conducting polymer electrolytes that opens a library of possibilities to enable the realization of polymer-based batteries.

25 ENERGY STORAGE↗

DOE OSTI2024

Viability of Additively Manufactured Electrodes for Lithium-Ion Batteries

As the global economy becomes increasingly electrified, the demand for batteries and energy storage is expected to rise significantly, particularly in the transportation and electricity sectors. Lithium-ion batteries (LIBs) are currently the most advanced and widely used technology in this field. Traditionally, LIBs are manufactured using simple 2D planar geometries to maximize production efficiency and minimize costs. However, this approach limits energy density due to the restricted design flexibility of the electrodes. Additive manufacturing (AM) offers a promising solution to enhance the energy density and efficiency of LIBs by enabling the design of architectures that reduce diffusive losses and allow for a greater amount of active material to be incorporated within the same device footprint, thereby minimizing the use of inactive materials. Different AM techniques come with their own set of limitations, including printing speed, material compatibility, and scale, which must be considered when designing electrodes. Scalable and cost-effective methods are particularly important for electric vehicle batteries, while achieving higher energy densities in microbatteries is crucial for the miniaturization of wearable electronics and medical devices. Here, in this study, we simulate various 3D porous electrode designs for LIBs using graphite and nickel manganese cobalt oxide (NMC) electrodes. These designs are selected to represent structures that could be produced using different AM techniques, such as direct ink writing, fused deposition modeling, and stereolithography. Our results indicate that at higher charging rates and increased areal mass loading, 3D structures can outperform traditional 2D electrodes, although the benefits may diminish with more complex designs that are harder to manufacture. The observed gains in energy density are attributed to improved electrode utilization and reduced diffusive energy losses. This comprehensive analysis of structure–performance relationships will provide valuable insights to guide future research on 3D designs, material selection, and AM techniques for additively manufactured battery electrodes.

25 ENERGY STORAGE↗

DOE OSTI2026

Molecular Additive Engineering for Process-Humidity Robustness and Reproducible Fabrication of Perovskite Solar Cells and Modules

The commercialization of perovskite solar cells (PSCs) faces significant challenges due to their sensitivity to environmental humidity, which compromises film crystallization and device stability. Here, we introduce diphenylvinylphosphine (DPVP) as a Lewis base additive that enhances the performance and reproducibility of PSCs fabricated under ambient-air conditions. DPVP suppresses moisture-induced defect formation and stabilizes crystallization within realistic process-humidity ranges (20–40% relative humidity) commonly encountered in laboratory and pilot-scale manufacturing environments. It improves film uniformity, reduces trap densities, and yields highly reproducible device performance, enabling champion PCEs of 24.2% in small-area devices and 20.5% in blade-coated 12 cm 2 mini-modules. Furthermore, DPVP-assisted modules exhibit enhanced stability, retaining over 85% of their initial efficiency after 900 h of maximum power point tracking (MPPT) at 65 °C. This study demonstrates a humidity-resilient and scalable additive strategy for ambient-air perovskite photovoltaic manufacturing.

defect passivation↗

DOE OSTI2025

Go with the Flow: Additives to Improve the Flowability of Crumbled Corn Stover

For this work, magnesium stearate (MgSt), a common flow additive and anticaking agent, was applied to corn stover feedstocks with three particle sizes. The material handling properties of dry, 15%, and 30% moisture content corn stover were measured with a Freeman FT-4 powder rheometer and mass flow hopper calculations. While hydrated biomass typically exhibits poor flowability, introducing MgSt led to a significant increase in flowability for dry and 15% moisture content feedstocks, with less impact at 30% moisture content. Inverse gas chromatography showed a decrease, up to 40%, in the surface energy of MgSt-coated corn stover. While MgSt may not be ideal for biofuel or chemical production, this study highlights the potential of flow additives to reduce adhesive and cohesive forces, improving biomass feedstock handling.

09 BIOMASS FUELS↗

DOE OSTI2025

Additive manufacturing of high explosives with inert dilution for wave shaping and detonation velocity grading

The performance of a high explosive charge is highly influenced by the detonation velocity and any inherent internal structure. Additively manufactured (AM) high explosive charges allow for a precisely engineered internal structure and the selective placement of discrete or graded volumes of a tailored material, which are unachievable by conventional means. The dilution of a solid explosive by an inert additive for detonation velocity reduction is herein evaluated for a method of material extrusion called a direct-ink-write AM, where an 1,3,5,7-tetranitro-1,3,5,7-tetrazoctane-based ultraviolet -curable energetic-binder paste explosive was diluted by the inert density mock 5-iodo-2′-deoxyuridine for use in the manufacture of multi-material explosive charges. The explosive ink was characterized for printing by rheological and particle size measurements, and the detonation velocities for 0–40 wt. % inert diluent were found to have a continuous linear reduction in detonation velocity down to 14.3% difference. A two-component 3D plane wave explosive lens with 8.038 km/s “fast” and 7.491 km/s “slow” diluted ink in an internal cone demonstrated a reduced time of breakout at the output face from 361 to 53 ns. A linearly graded “fast–slow–fast” cylinder was successfully printed and fired, showing engineered control along the length of the charge as the detonation velocity dropped from 7.851 to 6.700 km/s and then recovered to 7.241 km/s. The extreme control over the internal composition of a high explosive charge via a dual-material extruder/mixer challenges conventional manufacturing approaches and opens new avenues for engineered detonation wavefronts, high explosive charge performance, and new applications.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Multiscale fatigue crack initiation in hierarchical additively manufactured alloys

Bioinspired hierarchical microstructures offer a route toward engineered fatigue resistance in additively manufactured alloys. However, it remains unclear how discrete structural constituents independently govern damage accumulation, particularly during the critical fatigue initiation regime where short cracks strongly interact with local microstructure. Here, we investigate multiscale fatigue initiation in a dual-phase, nanolamellar AlCoCrFeNi 2.1 high-entropy alloy. By comparing microscale specimens that isolate the nanolamellar structure against macroscale specimens containing the full melt-pool architecture, we identify size-dependent fatigue initiation mechanisms. We find that failure is dictated by nanolamellar interfaces at the microscale, whereas mesoscale melt pool boundaries serve to initiate fatigue at the macroscale. This mechanistic shift is accompanied by a transition from macroscale quasi-brittle failure to microscale plasticity-driven crack extension. Our results provide a physical framework for understanding how structural hierarchy governs the transition from discrete microstructural deformation to continuum fatigue fracture behavior, informing the design of damage-tolerant, additively manufactured alloys.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Effect of toolpath in large-format additive manufacturing with bio-derived composites

There has been growing interest in integrating bio-derived composites into Large-format additive manufacturing (LFAM) feedstocks to reduce the use of petroleum-derived materials and reduce the overall carbon footprint of LFAM. However, these materials present unique challenges during manufacturing due to their variability, which can lead to unintended deformations and failures attributable to suboptimal process conditions. While numerical modelling has been extensively employed to simulate numerous manufacturing processes, its application in LFAM with bio-derived composites remains limited. This study addresses this gap by systematically developing a numerical model to simulate the LFAM process using bio-based materials, specifically wood fiber-reinforced polylactic acid (PLA/WF). Experimental investigations were conducted to characterise the thermal and mechanical properties of additively manufactured PLA/WF specimens. Numerical simulations were performed to predict temperature profiles and deformations during LFAM. The effect of varying infill patterns, internal structures, and tool paths on the temperature distribution and deformation of printed parts was explored using the developed model. This article aims to advance the utilisation of bio-derived composites in LFAM systems and provide a comprehensive understanding of the LFAM process. The findings offer valuable insights for optimising process parameters and enhancing the performance of LFAM with bio-based composites.

Large-format additive manufacturing↗

DOE OSTI2024

Additive manufacturing of multiscale NiFeMn multi-principal element alloys with tailored composition

Nanostructured multi-principal element alloys (MPEAs) have been explored as next-generation engineering materials due to unique mechanical and functional properties which have significant advantages over traditional dilute alloys. However, the practical applications of nanostructured MPEAs are still limited due to the lack of scalable processing approaches to prepare a large quantity of nanostructured MPEAs, as well as lack of an efficient pathway for high-throughput discovery of better functional nanostructured MPEAs within their vast compositional space. Here we tackle these challenges by presenting an integrated approach by combining direct-ink-writing-based additive manufacturing, solid-state sintering, and chemical dealloying to manufacture hierarchically porous MPEAs. The hierarchical structure is comprised of macro- and micro-scale pores introduced via extrusion printing and polymer decomposition during sintering, as well as nanoscale pores formed via chemical dealloying. The macro- and micro-scale pores allow efficient dealloying of a large mass of material as the diffusion length that the corroding medium must penetrate remains at the scale of the ligaments formed after sintering (∼10 μm), despite the large volume of the 3D-printed samples. In addition, this integrated approach enables versatile control of the alloy composition via precisely tuning the ratio of elemental powders in the starting ink, thus offering a pathway for high-throughput discovery of novel functional MPEAs. As a case study, multiscale macro/micro/nanoporous NiFeMn MPEAs with three different compositions were investigated as catalysts to reduce the overpotential of oxygen evolution reaction (OER), where NiFeMn-based electrocatalysts display composition-dependent performance such that the overpotential measured at a current of 0.5 A g −1 for OER increases in the order of Ni 58 Fe 29 Mn 13 ⩽ Ni 64 Fe 26 Mn 10 < Ni 76 Fe 18 Mn 6 . This introduced manufacturing process offers new opportunities for scalable fabrication and rapid screening of nanostructured multi-component complex alloys.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Experimental Validation of a High-Temperature Test Facility for Future Additive Manufactured Supercritical Carbon Dioxide Turbine Testing

For next-generation power plants to achieve high cycle efficiencies consistent with the Department of Energy's 65% efficiency target, turbomachinery capable of operating within high-temperature power cycles must be demonstrated. Pairing additively manufactured superalloy turbines with the supercritical carbon dioxide (sCO 2 ) power cycle could enable turbine inlet temperatures approaching 1300 °C while providing flexibility in turbine cooling strategies. Development of test facilities to characterize and validate such systems is crucial. In this study, a turbine test facility capable of achieving inlet conditions of 800 °C, 11 MPa, and 0.43 kg/s while accommodating complex auxiliary cooling flow requirements has been designed and constructed to support future testing of a Haynes 282 additively manufactured 30 kW turbine-generator system with advanced cooling channels. This facility enables characterization of aerodynamic performance, leakage, and windage losses. Details of the facility's construction and operation are presented, along with experimental validation tests using an orifice as an expansion device in place of the turbine. These tests confirm that the facility can reach the required conditions, distinguish regions of achievable steady and pseudo-steady conditions, and identify the heater power required for each point in the upcoming turbine campaign. The campaign confirmed that ISO 5167-2 can reliably predict orifice mass flow rates in extreme supercritical carbon dioxide conditions with deviations of 0.5–7.5%.

42 ENGINEERING↗

DOE OSTI2024

A Co-Registered In-Situ and Ex-Situ Dataset of Electrical, Acoustic, and CT Characteristics from Wire Arc Additive Manufacturing Process

Recent progress in sensing techniques and data analytics tools have significantly accelerated the development of Wire Arc Additive Manufacturing (WAAM) systems. This data centric approach emphasizes leveraging available data throughout the production process to optimize performance. Integration of extensive data analysis provides the opportunity to improve precision, reduce waste, and enhance the quality of produced parts. This method relies on AI/ML models and optimization techniques, which are developed using the data collected from various sources, including in-situ sensors, ex-situ imaging, and manufacturing process parameters. The quality and diversity of this data, along with the alignment between different data streams (achieved through spatiotemporal registration) are critical for the successful development of AI/ML and optimization models. In this work, we present a spatiotemporally registered dataset generated during the WAAM process of deposition of a rectangular block. The dataset includes the comprehensive description of deposition process, process parameters, in-situ collected welding characteristics, acoustic data, and X-Ray Computed Tomography analysis data for the build. Dataset A Co-Registered In-Situ and Ex-Situ Dataset of Electrical, Acoustic, and CT Characteristics from Wire Arc Additive Manufacturing Process has arisen under UT-Battelle, LLC’s Prime Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy (DOE) to manage and operate the Oak Ridge National Laboratory. UT-Battelle, LLC will not assert any rights under United States law or under the Prime Contract it has in the dataset against any user of the dataset, including any copyrights or patent rights. UT-Battelle, LLC requests that attribution to the dataset is provided as academically appropriate.

42 ENGINEERING↗

DOE OSTI2024

Adamantine 1.0: A Thermomechanical Simulator for Additive Manufacturing

Adamantine is a thermomechanical simulation code that is written in C++ and built on top of deal.II (Arndt et al., 2023), p4est (Burstedde et al., 2011), ArborX (Lebrun-Grandié et al., 2020), Trilinos (The Trilinos Project Team, 2020), and Kokkos (Trott et al., 2022). Adamantine was developed with additive manufacturing in mind and it is particularly well adapted to simulate fused filament fabrication, directed energy deposition, and powder bed fusion. Adamantine employs the finite element method with adaptive mesh refinement to solve a nonlinear anisotropic heat equation, enabling support for various additive manufacturing processes. It can also perform elastoplastic and thermoelastoplastic simulations. It can handle materials in three distinct phases (solid, liquid, and powder) to accurately reflect the physical state during different stages of the manufacturing process. To enhance simulation accuracy, adamantine incorporates data assimilation techniques (Asch et al., 2016). This allows it to integrate experimental data from sensors like thermocouples and infrared (IR) cameras. This combined approach helps account for errors arising from input parameters, material properties, models, and numerical calculations, leading to more realistic simulations that reflect what occurs in a particular print.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Additively Manufactured Molten Salt to Supercritical Carbon Dioxide Heat Exchanger

Design, fabrication, and experimental characterization of the performance of a molten salt (MS)-to-supercritical carbon dioxide (sCO 2 ) heat exchanger (HE) for concentrating solar power (CSP) applications using laser powder bed fusion (LPBF) additive manufacturing (AM) of nickel-based superalloys is presented in this report. The hypothesis is that such additively manufactured HEs will result in a monolithic, compact, low-pressure drop HE that is durable under cyclic operation at high temperature and high pressure in a corrosive salt environment. Two nickel-based superalloys were considered in the project- Haynes 230 (H230) and Haynes 282 (H282). Process windows for LPBF AM were established to provide dense low porosity parts for both alloys. Creep tests results on heat treated AM H230 and H282 samples showed that the AM fabricated specimens were as robust as the wrought specimens and showed no deficit in creep strength at high temperatures. Haynes 282 was down selected for the HE fabrication based on better dimensional tolerance, better corrosion resistance to chloride salt, and higher creep strength.

14 SOLAR ENERGY↗

DOE OSTI2024

Novel Hot Gas Components for Gas Turbine Engines Enabled by Materials and Additive Manufacturing Process Development

Additive Manufacturing (AM), also known as 3D printing, has emerged as a manufacturing method that enables new design freedom for gas turbine engine manufacturers. However, the material selection for AM processable high-temperature super alloys is currently limited. Additionally, the heat transfer performance of AM enabled micro-cooling architectures is not yet well understood. Accordingly, in support of advanced manufacturing and engine performance development, Oak Ridge National Laboratory (ORNL)and Solar Turbines (Solar) conducted a multidisciplinary project to generate both AM super alloy material properties data and micro-channel performance data for two AM super alloys. The data supported the design and analysis of an internally cooled turbine hot section AM tip shoe component. This data was used to analytically predict the reduction in operating temperature of a gas turbine tip shoe. The work concluded that the cooling flow required to cool the tip shoe can be tuned to suit the efficiency improvements desired in an industrial gas turbine.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Design of Novel Hot Gas Component for Gas Turbine Engines Enabled by Materials and Additive Manufacturing Process Development

This CRADA project was the result of a project award under FOA-DOE-0001980. The overarching FOA project team consisted of researchers from Carpenter Technology Corporation (CTC), Solar Turbines Incorporated (Solar), Pennsylvania State University (PSU), University of California-Santa Barbara (UCSB), and Oak Ridge National Laboratory (ORNL). Evaluations were conducted on two high-γ’ superalloys that were designed by CTC and the UCSB. One alloy named GammaPrint-700 (GP-700) is a cobalt-base superalloy. The other alloy named GammaPrint-1100 (GP-1100) is a nickel-base (Ni-base) superalloy. PSU provided expertise and experimental testing of the thermal performance of AM micro-cooling architectures. ORNL provided expertise with the AM superalloy materials characterization and AM processing science. Solar provided turbine component design expertise. The focus of this CRADA report is to document the efforts between ORNL and CTC towards the development of superalloys designed for AM. The project goal was to use an AM processable high-temperature superalloy and design for Additive Manufacturing (DfAM) techniques to design an efficient turbine component (i.e. a turbine tip shoe) with enhanced cooling features that can only be fabricated through additive manufacturing (AM). The efficiencies of existing combined heat and power (CHP) engines are capped by both component design and materials limitations. However, AM of a tip shoe component from a γ’strengthened superalloy offers the design flexibility to increase the efficiency and power of an industrial gas turbine. This project brought about advancements in the DfAM tip shoe design space and in the area of high temperature superalloys processable through laser powder bed fusion (LPBF) AM. State of art computation design tools were utilized to optimize unique cooling features into a tip shoe component design. A two-prong materials development approach was taken to support development of the AM tip shoe geometry. The first approach centered on investigating the processability and the appropriate process science for the industry standard high-γ’ nickel-base (Ni-base) superalloy Mar-M247. This superalloy is typically cast and considered non-weldable by traditional welding standards. In the course of this work, the alloy was not deemed feasible for process scale-up due to significant cracking issues during printing. The second approach focused on the development and evaluation of a novel cobalt-base superalloy, GammaPrint™-700 (GP-700 and a Ni-base superalloy, GammaPrint™-1100 (GP-1100) designed to mitigate the significant AM processing issues with Mar-M247. The processability of these two alloys were investigated through electron beam melting (EBM) binder-jet AM (BJAM), and LPBF as a risk mitigation for manufacturability. To be considered a candidate material for down-selection to proceed to full-scale AM tip shoe engine testing trials, the high temperature creep rupture strength was required to achieve at a minimum, a Larsen Miller Parameter (LMP) increase of 10.9% over the baseline material LPBF AM Hastelloy X.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2024

Using Additive Manufacturing to Repair Gas Turbine Hot Section Components

Ni-based superalloys are used in the hot sections of gas turbine engines due to their excellent high temperature performance. During service the material degrades due to exposure at high temperature and mechanical loads. Hence, utility provides often inspect, service, and repair components in gas turbine engines to ensure safe operation. A major challenge, however, is that the most heat-resistant alloys are generally considered ‘non-weldable’ rendering them difficult to repair via welding operations. In these cases components are often scrapped and then replaced by parts which must be re-manufactured. This burdens utilities with additional cost and supply chain issues can result in long term outages or reduced operating limtis. In this work EPRI and ORNL investigated a proposed repair strategy for gas turbine hot section components. Hot section superalloy GTD-111 was selected as a candidate repair material system and AM material ABD-900 the repair material. Sandwich structures were fabricated via electron beam melting additive manufacturing (EBM-AM) producing tensile bars with gage sections consisting of dissimilar ABD-900 / GTD-111 / ABD-900 material. Metallography revealed that the interface exhibited no deleterious phases or processing defeats. Creep rupture experiments on heat treated material demonstrates that the emulated repair coupons exhibit creep resistance between GTD-111 and ABD-900. This study demonstrates that the proposed EBM-AM repair strategy presents a viable opportunity towards enabling AM repair of gas turbine engine components.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2025

Plastic Additive, Sorbent-Coated, Thermally Integrated Contactor for CO 2 Capture (PLASTIC4CO2) (Final Report)

Final report for Plastic Additive, Sorbent-Coated, Thermally Integrated Contactor for CO2 Capture (PLASTIC4CO2) DE-FE-0032132. The goal of the work was to investigate at a technology readiness level of 3 (TRL 3), the proof of concept of an additively printed plastic 2-channel heat exchanger/sorbent contactor system to achieve a 15% lower levelized cost of electricity (LCOE) than a baseline liquid phase amine adsorber system for 90% and 95% capture of CO 2 from both a 7F02 2x1CC and 7HA02 2x1CC natural gas turbines.

03 NATURAL GAS↗

DOE OSTI2025

Binder Jet Additive Manufacturing of Silicon Carbide Solar Reactor (CRADA Report)

Achieving high powder packing density is critical in binder jet additive manufacturing (BJAM), as it directly influences the final part density, mechanical properties, and sintering behavior. Multi-modal powder blends, which combine particles of different sizes, have been explored as a strategy to optimize packing efficiency and minimize defects. In this study, bimodal and trimodal powder blends were obtained by mixing silicon carbide powder in three different sizes. These results show that increased powder density is achievable with bimodal powder blends but is reduced in trimodal blends, and it was found that a 13% increase in the powder tap density was achieved using a bimodal blend of powder. The powder size distribution of the bimodal blend was measured at various stages during binder jet additive manufacturing and, no measurable powder separation occurred even after eight prints. Overall, this study shows limited advantage to trimodal powder blends but good promise for trimodal blends for increasing printed density while maintaining reusability in the binder jet process.

99 GENERAL AND MISCELLANEOUS↗