SEARCH · Search NASA

Results for “Analytical Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Microbiological methods for the water recovery systems test, revision 1.1

Current microbiological parameters specified to verify microbiological quality of Space Station Freedom water quality include the enumeration of total bacteria, anaerobes, aerobes, yeasts and molds, enteric bacteria, gram positives, gram negatives, and E. coli. In addition, other parameters have been identified as necessary to support the Water Recovery Test activities to be conducted at the NASA/MSFC later this year. These other parameters include aerotolerant eutrophic mesophiles, legionellae, and an additional method for heterotrophic bacteria. If inter-laboratory data are to be compared to evaluate quality, analytical methods must be eliminated as a variable. Therefore, each participating laboratory must utilize the same analytical methods and procedures. Without this standardization, data can be neither compared nor validated between laboratories. Multiple laboratory participation represents a conservative approach to insure quality and completeness of data. Invariably, sample loss will occur in transport and analyses. Natural variance is a reality on any test of this magnitude and is further enhanced because biological entities, capable of growth and death, are specific parameters of interest. The large variation due to the participation of human test subjects has been noted with previous testing. The resultant data might be dismissed as 'out of control' unless intra-laboratory control is included as part of the method or if participating laboratories are not available for verification. The purpose of this document is to provide standardized laboratory procedures for the enumeration of certain microorganisms in water and wastewater specific to the water recovery systems test. The document consists of ten separate cultural methods and one direct count procedure. It is not intended nor is it implied to be a complete microbiological methods manual.

Rhoads, Tim↗

NASA NTRS1981

An analytical pilot rating method for highly elastic aircraft

An analytical method was developed to predict pilot ratings for highly elastic aircraft subject to severe mode interactions between rigid body and elastic dynamics. An extension of the standard optimal control model of pilot response was made to include the hypothesis that the pilot controls the system with an internal model consisting of the slowly varying part of the aircraft dynamics. This modified optimal control model was analytically evaluated for a longitudinal pitch tracking task on a large flexible aircraft. Parametric variations in the undamped natural frequencies of two symmetric elastic modes were made to induce varying amounts of mode interaction. The model proved successful in discriminating when the pilot can or cannot visually separate rigid from elastic pitch response in the turbulence excited tracking task. This method shows considerable promise in making it possible to investigate such mode interaction effects on handling qualities in the preliminary design stage of new aircraft.

Swaim, R. L.↗

DOE OSTI2024

Application of C ( t )-Integral Solutions in Extending ASME BPVC Section XI Division 2 Code Case N-934 for Transient Creep Crack Growth

Creep crack growth is a phenomenon which arises in damaged metallic structures under combined primary and secondary loads in the creep regime. The High Temperature Flaw Evaluation Code Committee of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (BPVC) is evaluating methods in extending Code Case N-934 to capture transient creep crack growth. Here, this paper provides context and basic examples on the selected approach to transient creep crack growth methods based on the C(t)-integral. The basis for selected C(t)-integral solution as analytical method is established, including an overview of its derivation. Practical assessments of a crack growing under creep conditions in a realistic component are conducted to illustrate the analytical approach. Additional considerations in the application of the analytical methods and limitations are discussed.

36 MATERIALS SCIENCE↗

NASA NTRSDate not supplied

Ascent Aborts 2 Flight, Reconstruction of Structural Dynamics (Couple Loads Transients)

- This work describes the elements of AA2 post-flight data analysis, couple loads analysis, and comparisons of the flight data with the results of analytical methods transiently. - The measured transient responses ranged from rigid body frequencies (zero Hz) to 150 Hz. - The analytical methods consisted of defining and determining all forcing functions, i.e., buffet, aerodynamics, thrusts from the abort motor and the carrier lunch vehicle motor, and the initial conditions at pre-separation. - Mathematical models representing the mechanics of Orion abort is relatively complex because 1) two motors (carrier’s and LAS’s) are operating at the same time at pre-separation, and 2) the separation occurs in atmosphere. - Other challenges consist of determining the aerodynamics with plume-on condition at every millisecond of the flight ranging from transonic to supersonic (i.e., Mach 1.1 to Mach 1.6), and defining the mechanics of separation of LAS from the launch vehicle.

Launch Vehicle↗

NASA NTRS1986

Fire control method and analytical model for large liquid hydrocarbon pool fires

The dominate parameter governing the behavior of a liquid hydrocarbon (JP-5) pool fire is wind speed. The most effective method of controlling wind speed in the vicinity of a large circular (10 m dia.) pool fire is a set of concentric screens located outside the perimeter. Because detailed behavior of the pool fire structure within one pool fire diameter is unknown, an analytical model supported by careful experiments is under development. As a first step toward this development, a regional pool fire model was constructed for the no-wind condition consisting of three zones -- liquid fuel, combustion, and plume -- where the predicted variables are mass burning rate and characteristic temperatures of the combustion and plume zones. This zone pool fire model can be modified to incorporate plume bending by wind, radiation absorption by soot particles, and a different ambient air flow entrainment rate. Results from the zone model are given for a pool diameter of 1.3 m and are found to reproduce values in the literature.

Fenton, D. L.↗

NASA NTRS1977

Compounds in airborne particulates - Salts and hydrocarbons

Concentrations of 10 polycyclic aromatic hydrocarbons (PAH), the aliphatics as a group, sulfate, nitrate, fluoride, acidity, and carbon in the airborne particulate matter were measured at 16 sites in Cleveland, OH over a 1-year period during 1971 and 1972. Analytical methods used included gas chromatography, colorimetry, and combustion techniques. Uncertainties in the concentrations associated with the sampling procedures, and the analytical methods are evaluated. The data are discussed relative to other studies and source origins. High concentrations downwind of coke ovens for 3,4 benzopyrene are discussed. Hydrocarbon correlation studies indicated no significant relations among compounds studied.

King, R. B.↗

NASA NTRS1993

Analysis of bolt-loaded elliptical holes in laminated composite joints

The feasibility of changing the bolt shape from circular to elliptical in order to increase the joint strength was investigated. An analytical method using a cosine series to represent the bearing stress was derived, and a boundary collocation method was used to determine the unknown coefficients of this cosine series. Stresses at the hole edge predicted by the analytical method agreed very well with finite element solutions. Failure analyses of joints in two different laminates were performed, and each laminate exhibited a different joint failure mode. Results demonstrate that the joint strength of both laminates can be improved substantially by changing the bolt shape to elliptical. The joint that failed in a bearing mode showed a greater strength increase compared to the joint that failed in a shearing mode.

Wang, J. T.↗

NASA NTRS1989

An analytical sensitivity method for use in integrated aeroservoelastic aircraft design

Interdisciplinary analysis capabilities have been developed for aeroservoelastic aircraft and large flexible spacecraft, but the requisite integrated design methods are only beginning to be developed. One integrated design method which has received attention is based on hierarchal problem decompositions, optimization, and design sensitivity analyses. This paper highlights a design sensitivity analysis method for Linear Quadratic Gaussian (LQG) optimal control laws, enabling the use of LQG techniques in the hierarchal design methodology. The LQG sensitivity analysis method calculates the change in the optimal control law and resulting controlled system responses due to changes in fixed design integration parameters using analytical sensitivity equations. Numerical results of a LQG design sensitivity analysis for a realistic aeroservoelastic aircraft example are presented. In this example, the sensitivity of the optimal control law and aircraft response for various parameters such as wing bending natural frequency is determined. The sensitivity results computed from the analytical expressions are used to estimate changes in response resulting from changes in the parameters. Comparisons of the estimates with exact calculated responses show they are reasonably accurate for + or - 15 percent changes in the parameters. Evaluation of the analytical expressions is computationally faster than equivalent finite difference calculations.

Gilbert, Michael G.↗

NASA NTRS1989

An analytical sensitivity method for use in integrated aeroservoelastic aircraft design

Interdisciplinary analysis capabilities have been developed for aeroservoelastic aircraft and large flexible spacecraft, but the requisite integrated design methods are only beginning to be developed. One integrated design method which has received attention is based on hierarchal problem decompositions, optimization, and design sensitivity analyses. This paper highlights a design sensitivity analysis method for Linear Quadratic Gaussian (LQG) optimal control laws, enabling the use of LQG techniques in the hierarchal design methodology. The LQG sensitivity analysis method calculates the change in the optimal control law and resulting controlled system responses due to changes in fixed design integration parameters using analytical sensitivity equations. Numerical results of an LQG design sensitivity analysis for a realistic aeroservoelastic aircraft example are presented. In this example, the sensitivity of the optimal control law and aircraft response for various parameters such as wing bending natural frequency is determined. The sensitivity results computed from the analytical expressions are used to estimate changes in response resulting from changes in the parameters. Comparisons of the estimates with exact calculated responses show they are reasonably accurate for + or - 15 percent changes in the parameters. Evaluation of the analytical expressions is computationally faster than equivalent finite difference calculations.

Gilbert, Michael G.↗

NASA NTRS1976

The effect of varying freestream velocity on dynamic stall characteristics

A low speed wind tunnel equipped with an axial gust generator to simulate the aerodynamic environment of a helicopter rotor was used to study the dynamic stall of a pitching blade. The objective of this investigation was to find out to what extent harmonic velocity perturbations in the freestream affect dynamic stall. The study involved making measurements of the aerodynamic moment on a two-dimensional, pitching blade model in both constant and pulsating airstreams. Using an operational analog computer to perform on-line data reduction, plots of moment versus angle of attack and work done by the moment were obtained. The data taken in the varying freestream were then compared to constant freestream data, and to the results of two analytical methods. These comparisons showed that the velocity perturbations had a significant effect on the pitching moment which could not be consistently predicted by the analytical methods, but had no drastic effect on the blade stability.

Pierce, G. A.↗

NASA NTRS1978

Two-dimensional dynamic stall as simulated in a varying freestream

A low speed wind tunnel equipped with a axial gust generator to simulate the aerodynamic environment of a helicopter rotor was used to study the dynamic stall of a pitching blade in an effort to ascertain to what extent harmonic velocity perturbations in the freestream affect dynamic stall. The aerodynamic moment on a two dimensional, pitching blade model in both constant and pulsating airstream was measured. An operational analog computer was used to perform on-line data reduction and plots of moment versus angle of attack and work done by the moment were obtained. The data taken in the varying freestream were then compared to constant freestream data and to the results of two analytical methods. These comparisons show that the velocity perturbations have a significant effect on the pitching moment which can not be consistently predicted by the analytical methods, but had no drastic effect on the blade stability.

Pierce, G. A.↗

NASA NTRS1992

High speed transition prediction

The main objective of this work period was to develop, acquire and apply state-of-the-art tools for the prediction of transition at high speeds at NASA Ames. Although various stability codes as well as basic state codes were acquired, the development of a new Parabolized Stability Equation (PSE) code was minimal. The time that was initially allocated for development was used on other tasks, in particular for the Leading Edge Suction problem, in acquiring proficiency in various graphics tools, and in applying these tools to evaluate various Navier-Stokes and Euler solutions. The second objective of this work period was to attend the Transition and Turbulence Workshop at NASA Langley in July and August, 1991. A report on the Workshop follows. From July 8, 1991 to August 2, 1991, the author participated in the Transition and Turbulence Workshop at NASA Langley. For purposes of interest here, analysis can be said to consist of solving simplified governing equations by various analytical methods, such as asymptotic methods, or by use of very meager computer resources. From the composition of the various groups at the Workshop, it can be seen that analytical methods are generally more popular in Great Britain than they are in the U.S., possibly due to historical factors and the lack of computer resources. Experimenters at the Workshop were mostly concerned with subsonic flows, and a number of demonstrations were provided, among which were a hot-wire experiment to probe the boundary layer on a rotating disc, a hot-wire rake to map a free shear layer behind a cylinder, and the use of heating strips on a flat plate to control instability waves and consequent transition. A highpoint of the demonstrations was the opportunity to observe the rather noisy 'quiet' supersonic pilot tunnel in operation.

Gasperas, Gediminis↗

NASA NTRS1979

Comparison of theoretical predicted longitudinal aerodynamic characteristics with full-scale wind tunnel data on the ATLIT airplane

An analytical method is presented for predicting the lift coefficient, the pitching moment coefficient, and the drag coefficient of light, twin-engine, propeller-driven airplanes. The method was applied to the Advanced Technology Light Twin-Engine airplane. The calculated characteristics were then correlated against full scale wind tunnel data. The analytical method was found to predict the drag and pitching moment fairly well. However, the lift prediction was extremely poor.

Vandam, C. P. G.↗

DOE OSTI2025

Correlations between the Neutron Star Mass–Radius Relation and the Equation of State of Dense Matter

We develop an analytic method of inverting the Tolman–Oppenheimer–Volkoff relations to high accuracy. In principle, a specified energy density–pressure relation gives a unique mass–radius (M–R) relation and vice versa. Our method is developed from the strong correlations that are shown to exist between the neutron star mass–radius curve and the equation of state (EOS) or pressure–energy density relation. Selecting points that have masses equal to fixed fractions of the maximum mass, we find a semi-universal power-law relation between the central energy densities, pressures, sound speeds, chemical potentials, and number densities of those stars, with the maximum mass and the radii of one or more fractional maximum mass points. Rms fitting accuracies, for EOSs without large first-order phase transitions, are typically 0.5% for all quantities at all mass points. The method also works well, although less accurately, in reconstructing the EOS of hybrid stars with first-order phase transitions. These results permit, in effect, an analytic method of inverting an arbitrary M–R curve to yield its underlying EOS. We discuss applications of this inversion technique to the inference of the dense matter EOS from measurements of neutron star masses and radii as a possible alternative to traditional Bayesian approaches.

Bayesian statistics↗

NASA NTRS1984

Survey of NASA research on crash dynamics

Ten years of structural crash dynamics research activities conducted on general aviation aircraft by the National Aeronautics and Space Administration (NASA) are described. Thirty-two full-scale crash tests were performed at Langley Research Center, and pertinent data on airframe and seat behavior were obtained. Concurrent with the experimental program, analytical methods were developed to help predict structural behavior during impact. The effects of flight parameters at impact on cabin deceleration pulses at the seat/occupant interface, experimental and analytical correlation of data on load-limiting subfloor and seat configurations, airplane section test results for computer modeling validation, and data from emergency-locator-transmitter (ELT) investigations to determine probable cause of false alarms and nonactivations are assessed. Computer programs which provide designers with analytical methods for predicting accelerations, velocities, and displacements of collapsing structures are also discussed.

Thomson, R. G.↗

NASA NTRSDate not supplied

Methods for Analytic Reflected Radiant Flux Modeling in Observing Space Vehicles

During NASA’s Artemis I mission, the Orion Optical Navigation (OpNav) camerawas used in a flight test to capture images of the Interim Cryogenic Propulsion Stage(ICPS) at long range. Novel methods in reflectance modeling were developed to esti-mate the reflected light flux as a function of range to inform the camera settings usedto obtain the images. Postflight analysis was performed with the obtained imagesand telemetry. Techniques were developed using a specialized tool developed fromCOTS star identification and attitude determination software to localize ICPS andpositively identify it. The images were then used to verify the preflight prediction ofreflected radiant flux as a function of range and to provide insight into the vehicle’sattitude dynamics.

Spacecraft↗

NASA NTRSDate not supplied

Methods for Analytic Reflected Radiant Flux Modeling in Observing Space Vehicles

spacecraft↗

NASA NTRS2024

Double Power-law Formation by Sequential Particle Acceleration

Spectral double power laws are common in solar high-energy phenomena such as flares and interplanetary energetic-electron events. However, the physical mechanism that produces the changes in power-law index within a single spectrum is unclear. We developed a fully analytical method of forming single power-law spectra from sequential acceleration of particles orbiting inside and hopping between simulated large-scale magnetic islands formed by flare reconnection. Here, we extend the analytical method to the formation of double power-law spectra by assuming sequential acceleration in two successive regions with different acceleration and particle-transport rates. The resulting spectral distribution is continuous and smooth, with a flattening at low energies, two power-law regions at mid-energies, and a steep rollover at high energies. The model provides analytical expressions for the spectral indices, all energy breaks, and normalization constants as functions of just three physical parameters of each acceleration region: (1) the energy gain in each accelerator, (2) the percentage of particles transferred between accelerators, and (3) the number of accelerators visited. One of the most salient predictions of our work is that the spectral index at high (low) energies is determined by the parameters of the first "seed" (second) acceleration region. By constructing the spectral distribution through an iterative analytical process, the evolution toward a double power law is easily characterized and explained. Our analytical model provides tools to interpret space- and ground-based observations from RHESSI, FOXSI, NuSTAR, Solar Orbiter/STIX, EOVSA, and future high-energy missions.

Solar flares↗