Search NASA⌕ Search

SEARCH · Search NASA

Results for “Assistant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Ballistic Mercury orbiter mission via Venus and Mercury gravity assists

It is shown that it is possible to deliver a payload of 600 to 2000 kg to a 300-km circular orbit at Mercury using presently available NASA Space Transportation Systems and a single-stage bipropellant chemical rocket. This superior payload performance is attained by swingbys of Venus, plus (more importantly), the use of the reverse Delta-V/EGA process. In contrast to the Delta-V/EGA process (used to boost the launch energy by returning to earth for a gravity assist), the reverse Delta-V/EGA process reduces the Mercury approach energy each time a spacecraft makes a near-resonant return to Mercury for a gravity assist and reduces the orbit-capture Delta-V requirement. The mission sequences for such high-performance missions are described, and example mission opportunities for the years 1990 to 2010 are presented.

Yen, C.-W. L.↗
NASA NTRS1987

Tunneling-assisted impact ionization for a superlattice

Tunneling-assisted impact ionization across the conduction-band-edge discontinuity of quantum-well heterostructures is investigated and applied to a new superlattice structure. Multiquantum-well structures where the quantum-well regions are heavily doped and the undoped barrier regions are essentially insulating were considered. Incident hot electrons due to the applied electric field perpendicular to the heterointerface interact with the two-dimensional electrons confined to the quantum wells through Coulomb force. The resultant electrons can either have enough energy to get out of the wells or to tunnel through the triangular barriers. A new analytical approximation for the impact ionization rate is given which compares favorably with numerical results. The tunneling-assisted impact ionization rates and the ionization coefficients are calculated. It is shown that the tunneling effect reduces the ionization threshold and enhances the ionization rate significantly.

Chuang, S. L.↗
NASA NTRS1987

ESSAA: Embedded system safety analysis assistant

The Embedded System Safety Analysis Assistant (ESSAA) is a knowledge-based tool that can assist in identifying disaster scenarios. Imbedded software issues hazardous control commands to the surrounding hardware. ESSAA is intended to work from outputs to inputs, as a complement to simulation and verification methods. Rather than treating the software in isolation, it examines the context in which the software is to be deployed. Given a specified disasterous outcome, ESSAA works from a qualitative, abstract model of the complete system to infer sets of environmental conditions and/or failures that could cause a disasterous outcome. The scenarios can then be examined in depth for plausibility using existing techniques.

Wallace, Peter↗
NASA NTRS1988

Knowledge elicitation for an operator assistant system in process control tasks

A knowledge based system (KBS) methodology designed to study human machine interactions and levels of autonomy in allocation of process control tasks is presented. Users are provided with operation manuals to assist them in normal and abnormal situations. Unfortunately, operation manuals usually represent only the functioning logic of the system to be controlled. The user logic is often totally different. A method is focused on which illicits user logic to refine a KBS shell called an Operator Assistant (OA). If the OA is to help the user, it is necessary to know what level of autonomy gives the optimal performance of the overall man-machine system. For example, for diagnoses that must be carried out carefully by both the user and the OA, interactions are frequent, and processing is mostly sequential. Other diagnoses can be automated, in which the case the OA must be able to explain its reasoning in an appropriate level of detail. OA structure was used to design a working KBS called HORSES (Human Orbital Refueling System Expert System). Protocol analysis of pilots interacting with this system reveals that the a-priori analytical knowledge becomes more structured with training and the situation patterns more complex and dynamic. This approach can improve the a-priori understanding of human and automatic reasoning.

Boy, Guy A.↗
NASA NTRS1988

Adaptive guidance for an aero-assisted boost vehicle

An adaptive guidance system incorporating dynamic pressure constraint is studied for a single stage to low earth orbit (LEO) aero-assist booster with thrust gimbal angle as the control variable. To derive an adaptive guidance law, cubic spline functions are used to represent the ascent profile. The booster flight to LEO is divided into initial and terminal phases. In the initial phase, the ascent profile is continuously updated to maximize the performance of the boost vehicle enroute. A linear feedback control is used in the terminal phase to guide the aero-assisted booster onto the desired LEO. The computer simulation of the vehicle dynamics considers a rotating spherical earth, inverse square (Newtonian) gravity field and an exponential model for the earth's atmospheric density. This adaptive guidance algorithm is capable of handling large deviations in both atmospheric conditions and modeling uncertainties, while ensuring maximum booster performance.

Pamadi, Bandu N.↗
NASA NTRS1987

CLEAR: Communications Link Expert Assistance Resource

Communications Link Expert Assistance Resource (CLEAR) is a real time, fault diagnosis expert system for the Cosmic Background Explorer (COBE) Mission Operations Room (MOR). The CLEAR expert system is an operational prototype which assists the MOR operator/analyst by isolating and diagnosing faults in the spacecraft communication link with the Tracking and Data Relay Satellite (TDRS) during periods of realtime data acquisition. The mission domain, user requirements, hardware configuration, expert system concept, tool selection, development approach, and system design were discussed. Development approach and system implementation are emphasized. Also discussed are system architecture, tool selection, operation, and future plans.

Hull, Larry G.↗
NASA NTRS1988

Towards a knowledge-based system to assist the Brazilian data-collecting system operation

A study is reported which was carried out to show how a knowledge-based approach would lead to a flexible tool to assist the operation task in a satellite-based environmental data collection system. Some characteristics of a hypothesized system comprised of a satellite and a network of Interrogable Data Collecting Platforms (IDCPs) are pointed out. The Knowledge-Based Planning Assistant System (KBPAS) and some aspects about how knowledge is organized in the IDCP's domain are briefly described.

Rodrigues, Valter↗
NASA NTRS1988

Reliability analysis of large, complex systems using ASSIST

The SURE reliability analysis program is discussed as well as the ASSIST model generation program. It is found that semi-Markov modeling using model reduction strategies with the ASSIST program can be used to accurately solve problems at least as complex as other reliability analysis tools can solve. Moreover, semi-Markov analysis provides the flexibility needed for modeling realistic fault-tolerant systems.

Johnson, Sally C.↗
NASA NTRS1989

A gravity assist primer

An account is given of the method by which the 'energy gain' accruing to a spacecraft as a result of its 'gravity-assist', parabolic-trajectory flyby of a massive body, such as a planet. The procedure begins with the solution of the two-body portion of the problem, and the results thus obtained are used to calculate changes with respect to the other massive body in the overall scenario, namely the sun. Attention is given to the 'vector diagram' often used to display the gravity-assist effect. The present procedure is noted to be reasonably accurate for flybys in which the plane of the spacecraft's trajectory is approximately the same as that of the planet's orbit around the sun, or the ecliptic plane; this reduces the problem to one in two dimensions.

Cesarone, R. J.↗
NASA NTRS1990

Static Pressure-Assisted Seal For Helium

Two-piece, all-metal, pressure-assisted static flange seal holds in pressurized helium satisfactorily at temperature of negative 80 degree F (negative 62 degree C). Installed between two flanges, then bolted together. New version includes one pressure-assisted metal sealing element held in place by metal plate and flanges. Certified for use in flight on helium joints of Space Shuttle main engine. Likely terrestrial applications include laboratory and industrial gas-distribution systems.

Stuck, Donald E.↗
NASA NTRS1989

Ballistic Mercury orbiter mission via Venus and Mercury gravity assists

This paper shows that it is possible to deliver a payload of 600 to 2000 kg to a 300-km circular orbit at Mercury, using the presently available NASA STS and a single-stage bipropellant chemical rocket. This superior payload performance is attained by swingbys of Venus, plus more importantly, the use of the reverse Delta-V/EGA process. In contrast to the familiar Delta-V/EGA process used to boost the launch energy by returning to earth for a gravity assist, the reverse process reduces the Mercury approach energy each time a spacecraft makes a near-resonant return to Mercury for a gravity assist and reduces the orbit-capture Delta-V requirement. The mission sequences for such high-performance missions are described, and example mission opportunities for the years 1990 to 2010 are presented.

Yen, Chen-Wan Liu↗
NASA NTRS1988

Knowledge-based assistance in costing the space station DMS

The Software Cost Engineering (SCE) methodology developed over the last two decades at IBM Systems Integration Division (SID) in Houston is utilized to cost the NASA Space Station Data Management System (DMS). An ongoing project to capture this methodology, which is built on a foundation of experiences and lessons learned, has resulted in the development of an internal-use-only, PC-based prototype that integrates algorithmic tools with knowledge-based decision support assistants. This prototype Software Cost Engineering Automation Tool (SCEAT) is being employed to assist in the DMS costing exercises. At the same time, DMS costing serves as a forcing function and provides a platform for the continuing, iterative development, calibration, and validation and verification of SCEAT. The data that forms the cost engineering database is derived from more than 15 years of development of NASA Space Shuttle software, ranging from low criticality, low complexity support tools to highly complex and highly critical onboard software.

Henson, Troy↗
NASA NTRS1990

Plasma-assisted physical vapor deposition surface treatments for tribological control

In any mechanical or engineering system where contacting surfaces are in relative motion, adhesion, wear, and friction affect reliability and performance. With the advancement of space age transportation systems, the tribological requirements have dramatically increased. This is due to the optimized design, precision tolerance requirements, and high reliability expected for solid lubricating films in order to withstand hostile operating conditions (vacuum, high-low temperatures, high loads, and space radiation). For these problem areas the ion-assisted deposition/modification processes (plasma-based and ion beam techniques) offer the greatest potential for the synthesis of thin films and the tailoring of adherence and chemical and structural properties for optimized tribological performance. The present practices and new approaches of applying soft solid lubricant and hard wear resistant films to engineering substrates are reviewed. The ion bombardment treatments have increased film adherence, lowered friction coefficients, and enhanced wear life of the solid lubricating films such as the dichalcogenides (MoS2) and the soft metals (Au, Ag, Pb). Currently, sputtering is the preferred method of applying MoS2 films; and ion plating, the soft metallic films. Ultralow friction coefficients (less than 0.01) were achieved with sputtered MoS2. Further, new diamond-like carbon and BN lubricating films are being developed by using the ion assisted deposition techniques.

Spalvins, Talivaldis↗
NASA NTRS1992

Nonlinear feedback guidance law for aero-assisted orbit transfer maneuvers

Aero-assisted orbit transfer vehicles have the potential for significantly reducing the fuel requirements in certain classes of orbit transfer operations. Development of a nonlinear feedback guidance law for performing aero-assisted maneuvers that accomplish simultaneous change of all the orbital elements with least vehicle acceleration magnitude is discussed. The analysis is based on a sixth order nonlinear point-mass vehicle model with lift, bank angle, thrust and drag modulation as the control variables. The guidance law uses detailed vehicle aerodynamic and the atmosphere models in the feedback loop. Higher-order gravitational harmonics, planetary atmosphere rotation and ambient winds are included in the formulation. Due to modest computational requirements, the guidance law is implementable on-board an orbit transfer vehicle. The guidance performance is illustrated for three sets of boundary conditions.

Menon, P. K. A.↗
NASA NTRS1992

A model for the trap-assisted tunneling mechanism in diffused n-p and implanted n(+)-p HgCdTe photodiodes

A theoretical model for the trap-assisted tunneling process in diffused n-on-p and implanted n(+)-on-p HgCdTe photodiodes is presented. The model describes the traps and the trap characteristics: concentration, energy level, and capture cross sections. We have observed that the above two types of diodes differ in the voltage dependence of the trap-assisted tunneling current and dynamic resistance. Our model takes this difference into account and offers an explanation of the phenomenon. The good fit between measured and calculated DC characteristics of the photodiodes (for medium and high reverse bias and for temperatures from 65 to 140 K) supports the validity of the model.

Rosenfeld, David↗
NASA NTRS1992

Solar system 'fast mission' trajectories using aerogravity assist

Initial analyses of the aerogravity assist (AGA) delivery technique to solar system targets (and beyond) has been encouraging. Mission opportunities are introduced that do not exist with typical gravity assist trajectories and current launch capabilities. The technique has the most payoff for high-energy missions such as outer planet orbiters and flybys. The goal of this technique is to reduce the flight duration significantly and to eliminate propulsion for orbit insertion. The paper will discuss detailed analyses and parametric studies that consider launch opportunities for missions to the sun, Saturn, Uranus, Neptune, and Pluto using AGA at Venus and Mars.

Randolph, James E.↗
NASA NTRS1992

A model for the trap-assisted tunneling mechanism in diffused n-p and implanted n(+)-p HgCdTe photodiodes

This paper presents a theoretical model for the trap-assisted tunneling process in diffused n-on-p and implanted n(+)-on-p HgCdTe photodiodes. The model describes the connection between the leakage current associated with the traps and the trap characteristics: concentration, energy level, and capture cross sections. It is observed that the above two types of diodes differ the voltage dependence of the trap-assisted tunneling current and dynamic resistance. The model takes this difference into account and offers an explanation of the phenomenon. The good fit between measured and calculated dc characteristics of the photodiodes supports the validity of the model.

Rosenfeld, David↗