Search NASA⌕ Search

SEARCH · Search NASA

Results for “BINARY FLUID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

A CENSUS OF AM CVn STARS: THREE NEW CANDIDATES AND ONE CONFIRMED 48.3-MINUTE BINARY

We present three new candidate AM CVn binaries, and one confirmed new system, from a spectroscopic survey of color-selected objects from the Sloan Digital Sky Survey (SDSS). All four systems were found from their helium emission lines in low-resolution spectra taken on the Hale telescope at Palomar, the Nordic Optical Telescope, and the William Herschel Telescope on La Palma. The ultra-compact binary nature of SDSS J090221.35+381941.9 was confirmed using phase-resolved spectroscopy at the Keck-I telescope. From the characteristic radial velocity 'S-wave' observed in the helium emission lines, we measure an orbital period of 48.31 +- 0.08 minutes. The continuum emission can be described with a blackbody or a helium white dwarf atmosphere of T{sub eff} approx 15,000 K, in agreement with theoretical cooling models for relatively massive accretors and/or donors. The absence in the spectrum of broad helium absorption lines from the accreting white dwarf suggests that the accreting white dwarf cannot be much hotter than 15,000 K, or that an additional component such as the accretion disk contributes substantially to the optical flux. Two of the candidate systems, SDSS J152509.57+360054.5 and SDSS J172102.48+273301.2, do show helium absorption in the blue part of their spectra in addition to the characteristic helium emission lines. This in combination with the high effective temperatures of approx18,000 K and approx16,000 K suggests both to be at orbital periods below approx40 minutes. The third candidate, SDSS J164228.06+193410.0, exhibits remarkably strong helium emission on top of a relatively cool (T{sub eff} approx 12,000 K) continuum, indicating an orbital period above approx50 minutes.

79 ASTRONOMY AND ASTROPHYSICS↗

ON THE HYDRODYNAMIC INTERPLAY BETWEEN A YOUNG NUCLEAR STARBURST AND A CENTRAL SUPERMASSIVE BLACK HOLE

We present one-dimensional numerical simulations, which consider the effects of radiative cooling and gravity on the hydrodynamics of the matter reinserted by stellar winds and supernovae within young nuclear starbursts (NSBs) with a central supermassive black hole (SMBH). The simulations confirm our previous semi-analytic results for low-energetic starbursts, evolving in a quasi-adiabatic regime, and extend them to more powerful starbursts evolving in the catastrophic cooling regime. The simulations show a bimodal hydrodynamic solution in all cases. They present a quasi-stationary accretion flow onto the black hole, defined by the matter reinserted by massive stars within the stagnation volume and a stationary starburst wind, driven by the high thermal pressure acquired in the region between the stagnation and the starburst radii. In the catastrophic cooling regime, the stagnation radius rapidly approaches the surface of the starburst region, as one considers more massive starbursts. This leads to larger accretion rates onto the SMBH and concurrently to powerful winds able to inhibit interstellar matter from approaching the NSB. Our self-consistent model thus establishes a direct physical link between the SMBH accretion rate and the nuclear star formation activity of the host galaxy and provides a good upper limit to the accretion rate onto the central black hole.

79 ASTRONOMY AND ASTROPHYSICS↗

A COMMON SOURCE OF ACCRETION DISK TILT

Many different system types retrogradely precess, and retrograde precession could be from a tidal torque by the secondary on a misaligned accretion disk. However, a source that causes and maintains disk tilt is unknown. In this work, we show that accretion disks can tilt due to a force called lift. Lift results from differing gas stream supersonic speeds over and under an accretion disk. Because lift acts at the disk's center of pressure, a torque is applied around a rotation axis passing through the disk's center of mass. The disk responds to lift by pitching around the disk's line of nodes. If the gas stream flow ebbs, then lift also ebbs and the disk attempts to return to its original orientation. To first approximation, lift does not depend on magnetic fields or radiation sources but does depend on the mass and the surface area of the disk. Also, for disk tilt to be initiated, a minimum mass transfer rate must be exceeded. For example, a 10{sup -11} M{sub sun} disk around a 0.8 M{sub sun} compact central object requires a mass transfer rate greater than {approx} 8 x 10{sup -11} M{sub sun} yr{sup -1}, a value well below the known mass transfer rates in cataclysmic variable dwarf novae systems that retrogradely precess and exhibit negative superhumps in their light curves and a value well below mass transfer rates in protostellar-forming systems.

79 ASTRONOMY AND ASTROPHYSICS↗

EFFECTS OF ROTATION ON STOCHASTICITY OF GRAVITATIONAL WAVES IN THE NONLINEAR PHASE OF CORE-COLLAPSE SUPERNOVAE

By performing three-dimensional (3D) simulations that demonstrate the neutrino-driven core-collapse supernovae aided by the standing accretion shock instability (SASI), we study how the spiral modes of the SASI can impact the properties of the gravitational-wave (GW) emission. To see the effects of rotation in the nonlinear postbounce phase, we give a uniform rotation on the flow advecting from the outer boundary of the iron core, the specific angular momentum of which is assumed to agree with recent stellar evolution models. We compute fifteen 3D models in which the initial angular momentum and the input neutrino luminosities from the protoneutron star are changed in a systematic manner. By performing a ray-tracing analysis, we accurately estimate the GW amplitudes generated by anisotropic neutrino emission. Our results show that the gravitational waveforms from neutrinos in models that include rotation exhibit a common feature; otherwise, they vary much more stochastically in the absence of rotation. The breaking of the stochasticity stems from the excess of the neutrino emission parallel to the spin axis. This is because the compression of matter is more enhanced in the vicinity of the equatorial plane due to the growth of the spiral SASI modes, leading to the formation of the spiral flows circulating around the spin axis with higher temperatures. We point out that recently proposed future space interferometers like Fabry-Perot-type DECIGO would permit the detection of these signals for a Galactic supernova.

79 ASTRONOMY AND ASTROPHYSICS↗

EXPLOSIVE NUCLEOSYNTHESIS IN THE NEUTRINO-DRIVEN ASPHERICAL SUPERNOVA EXPLOSION OF A NON-ROTATING 15 M{sub sun} STAR WITH SOLAR METALLICITY

We investigate explosive nucleosynthesis in a non-rotating 15 M{sub sun} star with solar metallicity that explodes by a neutrino-heating supernova (SN) mechanism aided by both standing accretion shock instability (SASI) and convection. To trigger explosions in our two-dimensional hydrodynamic simulations, we approximate the neutrino transport with a simple light-bulb scheme and systematically change the neutrino fluxes emitted from the protoneutron star. By a post-processing calculation, we evaluate abundances and masses of the SN ejecta for nuclei with a mass number {<=}70, employing a large nuclear reaction network. Aspherical abundance distributions, which are observed in nearby core-collapse SN remnants, are obtained for the non-rotating spherically symmetric progenitor, due to the growth of a low-mode SASI. The abundance pattern of the SN ejecta is similar to that of the solar system for models whose masses range between (0.4-0.5) M{sub sun} of the ejecta from the inner region ({<=}10, 000 km) of the precollapse core. For the models, the explosion energies and the {sup 56}Ni masses are {approx_equal} 10{sup 51}erg and (0.05-0.06) M{sub sun}, respectively; their estimated baryonic masses of the neutron star are comparable to the ones observed in neutron-star binaries. These findings may have little uncertainty because most of the ejecta is composed of matter that is heated via the shock wave and has relatively definite abundances. The abundance ratios for Ne, Mg, Si, and Fe observed in the Cygnus loop are reproduced well with the SN ejecta from an inner region of the 15 M{sub sun} progenitor.

79 ASTRONOMY AND ASTROPHYSICS↗

SHOCK BREAKOUT IN TYPE II PLATEAU SUPERNOVAE: PROSPECTS FOR HIGH-REDSHIFT SUPERNOVA SURVEYS

Shock breakout is the brightest radiative phenomenon in a supernova (SN) but is difficult to be observed owing to the short duration and X-ray/ultraviolet (UV)-peaked spectra. After the first observation from the rising phase reported in 2008, its observability at high redshift is attracting enormous attention. We perform multigroup radiation hydrodynamics calculations of explosions for evolutionary presupernova models with various main-sequence masses M {sub MS}, metallicities Z, and explosion energies E. We present multicolor light curves of shock breakouts in Type II plateau SNe, being the most frequent core-collapse SNe, and predict apparent multicolor light curves of shock breakout at various redshifts z. We derive the observable SN rate and reachable redshift as functions of filter x and limiting magnitude m {sub x,lim} by taking into account an initial mass function, cosmic star formation history, intergalactic absorption, and host galaxy extinction. We propose a realistic survey strategy optimized for shock breakout. For example, the g'-band observable SN rate for m {sub g',lim} = 27.5 mag is 3.3 SNe deg{sup -2} day{sup -1} and half of them are located at z {>=} 1.2. It is clear that the shock breakout is a beneficial clue for probing high-z core-collapse SNe. We also establish ways to identify shock breakout and constrain SN properties from the observations of shock breakout, brightness, timescale, and color. We emphasize that the multicolor observations in blue optical bands with {approx}hour intervals, preferably over {>=}2 continuous nights, are essential to efficiently detect, identify, and interpret shock breakout.

79 ASTRONOMY AND ASTROPHYSICS↗

ONE MOMENT IN TIME-MODELING STAR FORMATION IN THE ANTENNAE

We present a new high-resolution N-body/smoothed particle hydrodynamics simulation of an encounter of two gas-rich disk galaxies that closely matches the morphology and kinematics of the interacting Antennae galaxies (NGC 4038/39). The simulation includes radiative cooling, star formation, and feedback from Type II supernovae. The large-scale morphology and kinematics are determined by the internal structure and the orbit of the progenitor disks. The properties of the central region, in particular the starburst in the overlap region, only match the observations for a very short time interval ({Delta}t {approx} 20 Myr) after the second encounter. This indicates that the Antennae galaxies are in a special phase only about 40 Myr after the second encounter and 50 Myr before their final collision. This is the only phase in the simulation when a gas-rich overlap region between the nuclei is forming accompanied by enhanced star formation. The star formation rate as well as the recent star formation history in the central region agree well with observational estimates. For the first time, this new model explains the distributed extra-nuclear star formation in the Antennae galaxies as a consequence of the recent second encounter. The proposed model predicts that the Antennae are in a later merger stage than the Mice (NGC 4676) and would therefore lose their first place in the classical Toomre sequence.

79 ASTRONOMY AND ASTROPHYSICS↗

Altering the Supply of Shielding Gases to Fabricate Distinct Geometry in GMA Additive Manufacturing

Wire arc additive manufacturing (WAAM) is the process by which large, metallic structures are built, layer-by-layer, using a welding arc to melt wire feedstock. In this process, the proper selection of the shielding gas plays a vital role in the achievement of structurally acceptable part geometries and quality surface finishes. In this study, the authors used either a ternary mix (He, Ar and CO 2 ) or a binary mix (Ar and CO 2 ) of shielding gases to deposit wall geometries using an open loop-controlled WAAM system developed at Oak Ridge National Laboratory’s Manufacturing Demonstration Facility. The binary blend produced a wider and shorter geometry, while the ternary blend resulted in a narrower build that was more equivalent to the CAD geometry. The data indicated that the binary blend provided a higher oxygen concentration in the weld as compared to that of the ternary blend. The results imply that the arc characteristics and heat input had a significantly higher impact on the weld penetration than the surface tension effect of surface active elements. This was further verified by developing and applying a high-fidelity computational fluid dynamics (CFD) model of the thermophysical properties of gas mixtures. The results from the model showed that, while the influence of increased oxygen concentration on the surface tension for the binary blend led to a deeper penetration, the ternary blend gave rise to heat flux to the workpiece.

36 MATERIALS SCIENCE↗

Numerical Analysis of Fuel Effects on Advanced Compression Ignition Using a Cooperative Fuel Research Engine Computational Fluid Dynamics Model

Growing environmental concerns and demand for a better fuel economy are driving forces that motivate the research for more advanced engines. Multi-mode combustion strategies have gained attention for their potential to provide high thermal efficiency and low emissions for light-duty applications. These strategies target optimizing the engine performance by correlating different combustion modes to load operating conditions. The extension from boosted spark ignition (SI) mode at high loads to advanced compression ignition (ACI) mode at low loads can be achieved by increasing the compression ratio and utilizing intake air heating. Further, in order to enable an accurate control of intake charge condition for ACI mode and rapid mode-switches, it is essential to gain fundamental insights into the autoignition process. Within the scope of ACI, homogeneous charge compression ignition (HCCI) mode is of significant interest. It is known for its potential benefits, operation at low fuel consumption, low NOx, and particulate matter (PM) emissions. In the present work, a virtual Cooperative Fuel Research (CFR) engine model is used to analyze fuel effects on ACI combustion. In particular, the effect of fuel octane sensitivity (S) (at constant Research Octane Number (RON)) on autoignition propensity is assessed under beyond-RON (BRON) and beyond-MON (BMON) ACI conditions. The three-dimensional CFR engine computational fluid dynamics (CFD) model employs a finite-rate chemistry approach with a multi-zone binning strategy to capture autoignition. Two binary blends with Research Octane Number (RON) of 90 are chosen for this study: primary reference fuel (PRF) with S = 0 and toluene–heptane (TH) blend with S = 10.8, representing paraffinic and aromatic gasoline surrogates. Reduced mechanisms for these blends are generated from a detailed gasoline surrogate kinetic mechanism. Simulation results with the reduced mechanisms are validated against experimental data from an in-house CFR engine, with respect to in-cylinder pressure, heat release rate, and combustion phasing. Thereafter, the sensitivity of combustion behavior to ACI operating condition (BRON versus BMON), air-fuel ratio (λ = 2 and 3), and engine speed (600 and 900 rpm) is analyzed for both fuels. It is shown that the sensitivity of a fuel’s autoignition characteristics to λ and engine speed significantly differs at BRON and BMON conditions. Moreover, this sensitivity is found to vary among fuels, despite the same RON. It is also observed that the presence of low-temperature heat release (LTHR) under BRON condition leads to more sequential autoignition and longer combustion duration than BMON condition. Finally, the study indicates that the octane index (OI) fails to capture the trend in the variation of autoignition propensity with S under the BMON condition.

33 ADVANCED PROPULSION SYSTEMS↗

Producing magnetar magnetic fields in the merger of binary neutron stars

The merger of binary neutron stars (BNSs) can lead to large amplifications of the magnetic field due to the development of turbulence and instabilities in the fluid, such as the Kelvin–Helmholtz shear instability, which drive small-scale dynamo activity. In order to properly resolve such instabilities and obtain the correct magnetic field amplification, one would need to employ resolutions that are currently unfeasible in global general relativistic magnetohydrodynamic simulations of BNS mergers. Here, we present a subgrid model that allows global simulations to take into account the small-scale amplification of the magnetic field which is caused by the development of turbulence during BNS mergers. Assuming dynamo saturation, we show that magnetar-level fields (∼10{sup 16} G) can be easily reached, and should therefore be expected from the merger of magnetized BNSs. The total magnetic energy can reach values up to ∼10{sup 51} erg and the post-merger remnant can therefore emit strong electromagnetic signals and possibly produce short gamma-ray bursts.

79 ASTRONOMY AND ASTROPHYSICS↗

Dixie Valley Bottoming Binary Unit

This binary plant is the first air cooled, high-output refrigeration based waste heat recovery cycle in the industry. Its working fluid is environmentally friendly and as such, the permits that would be required with a hydrocarbon based cycle are not necessary. The unit is largely modularized, meaning that the unit’s individual skids were assembled in another location and were shipped via truck to the plant site. The Air Cooled Condensers (ACC), equipment piping, and Balance of Plant (BOP) piping were constructed at site. This project further demonstrates the technical feasibility of using low temperature brine for geothermal power utilization. The development of the unit led to the realization of low temperature, high output, and environmentally friendly heat recovery systems through domestic research and engineering. The project generates additional renewable energy, resulting in cleaner air and reduced carbon dioxide emissions. Royalty and tax payments to governmental agencies will increase, resulting in reduced financial pressure on local entities. The major components of the unit were sourced from American companies, resulting in increased economic activity throughout the country.

15 GEOTHERMAL ENERGY↗

Multiscale dendritic needle network model of alloy solidification with fluid flow

We present a mathematical formulation of a multiscale model for solidification with convective flow in the liquid phase. The model is an extension of the dendritic needle network approach for crystal growth in a binary alloy. We propose a simple numerical implementation based on finite differences and step-wise approximations of parabolic dendritic branches of arbitrary orientation. Results of the two-dimensional model are verified against reference benchmark solutions for steady, unsteady, and buoyant flow, as well as steady-state dendritic growth in the diffusive regime. Simulations of equiaxed growth under forced flow yield dendrite tip velocities within 10% of quantitative phase-field results from the literature. Finally, we perform illustrative simulations of polycrystalline solidification using physical parameters for an aluminum-10wt% copper alloy. Resulting microstructures show notable differences when taking into account natural buoyancy in comparison to a purely diffusive transport regime. The resulting model opens new avenues for computationally and quantitatively investigating the influence of fluid flow and gravity-induced buoyancy upon the selection of dendritic microstructures. Further ongoing developments include an equivalent formulation for directional solidification conditions and the implementation of the model in three dimensions, which is critical for quantitative comparison to experimental measurements.

36 MATERIALS SCIENCE↗

Derivation of the lattice Boltzmann model for relativistic hydrodynamics

A detailed derivation of the lattice Boltzmann scheme for relativistic fluids recently proposed in M. Mendoza, B. Boghosian, H. Herrmann, and S. Succi, Phys. Rev. Lett. 105, 014502 (2010) is presented. The method is numerically validated and applied to the case of two quite different relativistic fluid-dynamic problems, namely, shock-wave propagation in quark-gluon plasmas and the impact of a supernova blast wave on massive interstellar clouds. Close to second-order convergence with the grid resolution, as well as linear dependence of computational time on the number of grid points and time steps, are reported.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Testing the isotropy of the Universe with type Ia supernovae

We analyze the magnitude-redshift data of type Ia supernovae included in the Union and Union2 compilations in the framework of an anisotropic Bianchi type I cosmological model and in the presence of a dark-energy fluid with anisotropic equation of state. We find that the amount of deviation from isotropy of the equation of state of dark energy, the skewness {delta}, and the present level of anisotropy of the large-scale geometry of the Universe, the actual shear {Sigma}{sub 0}, are constrained in the ranges -0.16 < or approx. {delta} < or approx. 0.12 and -0.012 < or approx. {Sigma}{sub 0} < or approx. 0.012 (1{sigma} C.L.) by Union2 data. Supernova data are then compatible with a standard isotropic universe ({delta}={Sigma}{sub 0}=0), but a large level of anisotropy, both in the geometry of the Universe and in the equation of state of dark energy, is allowed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fast Lattice Boltzmann Solver for Relativistic Hydrodynamics

A lattice Boltzmann formulation for relativistic fluids is presented and numerically validated through quantitative comparison with recent hydrodynamic simulations of relativistic fluids. In order to illustrate its capability to handle complex geometries, the scheme is also applied to the case of a three-dimensional relativistic shock wave, generated by a supernova explosion, impacting on a massive interstellar cloud. This formulation opens up the possibility of exporting the proven advantages of lattice Boltzmann methods, namely, computational efficiency and easy handling of complex geometries, to the context of (mildly) relativistic fluid dynamics at large, from quark-gluon plasmas up to supernovae with relativistic outflows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Speed of Sound Measurements of Binary Mixtures of Hydrofluorocarbons [Pentafluoroethane (R-125), 1,1-Difluoroethane (R-152a), or 1,1,1,2,3,3,3-Heptafluoropropane (R-227ea)] with Hydrofluoroolefins [2,3,3,3-Tetrafluoropropene (R-1234yf) or trans-1,3,3,3-Tetrafluoropropene (R-1234ze(E))]

In this article, speed of sound data measured using a dual-path pulse-echo instrument are reported for three binary refrigerant mixtures, R-125/1234yf, R-1234yf/152a, and R-1234ze(E)/227ea, at compositions of (0.33/0.67) and (0.67/0.33) mole fraction. The speed of sound was studied at temperatures ranging from 230 K to 345 K from pressures slightly above the bubble point curve up to 20 MPa for the mixtures containing R-1234yf and 49 MPa for the R-1234ze(E)/227ea mixtures. The relative combined expanded speed of sound uncertainty ranged from 0.039 % to 0.317 % with a mean uncertainty over all state points of less than 0.10 %. The reported data are compared to the most recent mixture models in REFPROP for each blend studied. Comparisons of available mixture models for the R-125/1234yf and R-1234yf/152a blends exhibit average absolute deviation values ranging from 0.10 % to 0.27 %, and the average absolute deviations for R-1234ze(E)/227ea blends range from 0.62 % to 0.94 %. The comparisons show that only minor adjustments are required to the R-125/1234yf and R-1234yf/152a mixture models to represent the speed of sound data within its uncertainty. However, significant adjustments are needed to improve the current mixture models for the R-1234ze(E)/227ea blend. Deficiencies with the R-1234ze(E)/227ea mixture model are not unexpected since it (1) utilizes a pure-fluid EOS R-1234ze(E) that has been shown to inaccurately represent R-1234ze(E) speed of sound values and (2) uses binary interaction parameters for the chemically similar mixture of R-1234yf/227ea.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SIMULATIONS OF WINDS OF WEAK-LINED T TAURI STARS: THE MAGNETIC FIELD GEOMETRY AND THE INFLUENCE OF THE WIND ON GIANT PLANET MIGRATION

By means of numerical simulations, we investigate magnetized stellar winds of pre-main-sequence stars. In particular, we analyze under which circumstances these stars will present elongated magnetic features (e.g., helmet streamers, slingshot prominences, etc). We focus on weak-lined T Tauri stars, as the presence of the tenuous accretion disk is not expected to have strong influence on the structure of the stellar wind. We show that the plasma-beta parameter (the ratio of thermal to magnetic energy densities) is a decisive factor in defining the magnetic configuration of the stellar wind. Using initial parameters within the observed range for these stars, we show that the coronal magnetic field configuration can vary between a dipole-like configuration and a configuration with strong collimated polar lines and closed streamers at the equator (multicomponent configuration for the magnetic field). We show that elongated magnetic features will only be present if the plasma-beta parameter at the coronal base is beta{sub 0} << 1. Using our self-consistent three-dimensional magnetohydrodynamics model, we estimate for these stellar winds the timescale of planet migration due to drag forces exerted by the stellar wind on a hot-Jupiter. In contrast to the findings of Lovelace et al., who estimated such timescales using the Weber and Davis model, our model suggests that the stellar wind of these multicomponent coronae are not expected to have significant influence on hot-Jupiters migration. Further simulations are necessary to investigate this result under more intense surface magnetic field strengths (approx2-3 kG) and higher coronal base densities, as well as in a tilted stellar magnetosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

THREE-DIMENSIONAL SIMULATIONS OF MIXING INSTABILITIES IN SUPERNOVA EXPLOSIONS

We present the first three-dimensional (3D) simulations of the large-scale mixing that takes place in the shock-heated stellar layers ejected in the explosion of a 15.5 M{sub sun} blue supergiant star. The blast is initiated and powered by neutrino-energy deposition behind the stalled shock by means of choosing sufficiently high neutrino luminosities from the contracting, nascent neutron star, whose high-density core is excised and replaced by a retreating inner grid boundary. The outgoing supernova shock is followed beyond its breakout from the stellar surface more than 2 hr after the core collapse. Violent convective overturn in the post-shock layer causes the explosion to start with significant large-scale asphericity, which acts as a trigger of the growth of Rayleigh-Taylor instabilities at the composition interfaces of the exploding star. Despite the absence of a strong Richtmyer-Meshkov instability at the H/He interface, which only a largely deformed shock could instigate, deep inward mixing of hydrogen is found as well as fast-moving, metal-rich clumps penetrating with high velocities far into the hydrogen envelope of the star as observed, for example, in the case of Supernova 1987A. Also individual clumps containing a sizeable fraction of the ejected iron-group elements (up to several 10{sup -3} M{sub sun}) are obtained in some models. The metal core of the progenitor is partially turned over with nickel-dominated fingers overtaking oxygen-rich bullets and both nickel and oxygen moving well ahead of the material from the carbon layer. Comparing with corresponding two-dimensional (axially symmetric; 2D) calculations, we determine the growth of the Rayleigh-Taylor fingers to be faster, the deceleration of the dense metal-carrying clumps in the helium and hydrogen layers to be reduced, the asymptotic clump velocities in the hydrogen shell to be higher (up to {approx}4500 km s{sup -1} for the considered progenitor and an explosion energy of 10{sup 51} erg, instead of {approx_lt}2000 km s{sup -1} in 2D), and the outward radial mixing of heavy elements and inward mixing of hydrogen to be more efficient in 3D than in 2D. We present a simple argument that explains these results as a consequence of the different action of drag forces on moving objects in the two geometries.

79 ASTRONOMY AND ASTROPHYSICS↗