SEARCH · Search NASA
Results for “Beam cooling”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A monolithic Si bolometer array for the Caltech Submillimeter Observatory
We are developing a submillimeter continuum camera for the Caltech Submillimeter Observatory (CSO) located on Mauna Kea. The camera will employ a monolithic Si bolometer array which was developed by Moseley et al. at the NASA Goddard Space Flight Center (GSFC). The camera will be cooled to a temperature of about 300 mK in a He-3 cryostat, and will operate primarily at wavelengths of 350 and 450 micrometers. We plan to use a bolometer array with 1x24 directly illuminated pixels, each pixel of dimension 1x2 sq mm, which is about half of the F/4 beam size at these wavelengths. Each pixel is 10 to 12 micrometers thick and is supported only by four thin Si legs formed by wet chemical etch. The pixels are doped n-type by phosphorus implantation, compensated by boron implantation. Signals from the bolometer pixels are first amplified by cryogenically cooled FET's. The signals are further amplified by room-temperature amplifiers and then separately digitized by 16 bit A/D converters with differential inputs. The outputs of the A/D converters are fed into a digital signal processing board via fiber-optic cables. The electronics and data acquisition system were designed by the Goddard group. We will report the status of this effort.
H2O line emission from shocked gas
The H2O emission expected from a hot astrophysical plasma containing water is computed to obtain (1) a general cooling function for water, and (2) the individual H2O line intensities in the specific case of the shocked gas region in Orion-KL. It is found that for a shocked molecular region, such as has been previously proposed to account for H2, CO, and O I observations of Orion-KL, there are several hundred H2O lines with fluxes that exceed 10 to the -18th W/sq cm into a 1 arcmin beam. Though the strongest of these generally correspond to strong terrestrial water absorption features, making their detection difficult, future balloon and space experiments should be capable of detecting a large number of water lines. An analytic fit to the total cooling due to water is obtained as a function of temperature, H2 density, and H2O column density. At large optical depth, the result exceeds significantly that obtained from the 'universal cooling function' of Hollenbach and McKee (1979).
Interchange for Joint Research Entitled: Miniature Laser Spectrometer for Stable Isotope Measurements
As a first step in successfully measuring carbon isotopes optically we have previously demonstrated the measurement of C-13/C-12 to a precision of 0.1% using a tunable diode laser and CO2 spectral lines in the 2300/cm spectral region. This precision of 0.1% (1 per mil) for carbon isotopes is a value sufficiently precise to provide important isotopic data of interest to astrobiologists. The precision presently attainable in gases is sufficient to permit our instrument to be used in the measurement of isotopic ratios of interest to astrobiologists as well as geologists and planetary scientists. A small stable isotope laser spectrometer with a 10 cm path gas cell was designed and constructed. The cell was integrated with a liquid nitrogen cooled tunable diode laser and indium antimonide detector for evaluation. Using the small gas cell, preliminary measurements of 13C/12C in CO2 were made employing single-beam sequential acquisitions of the required spectral data. The results indicate an accuracy of 0.1% which is sufficiently high to make meaningful measurements of martian samples. In addition, improvements in the spectrometer gas handling system have been made to markedly reduce C-13/C-12 isotopic fractionation during sample gas cell loading which we expect will lead to further improvements in precision and accuracy. An important part of making isotopic ratio measurements in solid samples using diode lasers is the conversion of the elements of interest to molecules that have absorption spectra in the mid-ir spectral range accessible by tunable diode lasers. In this project we have investigated the necessary sample preparation procedures to extract carbon, an element of astrobiological importance, from model soil compounds and to convert it to CO2, a molecule with appropriate optical absorption characteristics for reliable laser spectrometer isotopic ratio measurements of 13C/12C. We have considered calcium carbonate as a model for a component of the martian regolith, and we have formulated a simple heating protocol for extracting carbon in the form of CO2.
Height Control and Deposition Measurement for the Electron Beam Free Form Fabrication (EBF3) Process
A method of controlling a height of an electron beam gun and wire feeder during an electron freeform fabrication process includes utilizing a camera to generate an image of the molten pool of material. The image generated by the camera is utilized to determine a measured height of the electron beam gun relative to the surface of the molten pool. The method further includes ensuring that the measured height is within the range of acceptable heights of the electron beam gun relative to the surface of the molten pool. The present invention also provides for measuring a height of a solid metal deposit formed upon cooling of a molten pool. The height of a single point can be measured, or a plurality of points can be measured to provide 2D or 3D surface height measurements.
The Infrared Telescope in Space (IRTS)
The Infrared Telescope in Space (IRTS) is a cryogenically cooled small infrared telescope that will fly aboard the small space platform Space Flyer Unit. It will survey approximately 10% of the sky with a relatively wide beam during its 20 day emission. Four focal-plane instruments will make simultaneous observations of the sky at wavelengths ranging from 1 to 1000 microns. The IRTS will provide significant information on cosmology, interstellar matter, late-type stars, and interplanetary dust. This paper describes the instrumentation and mission.
ROSAT observations and correlated X-ray, radio, and optical features in cluster cooling flows
Images from the Rosat high resolution imager (HRI) of the central regions of cluster cooling flows are compared to optical continuum and radio continuum images. The radio sources associated with cooling flows show two distinct morphologies. In most sources, the jets appear to be inflating distinct lobes of radio plasma. These sources show strong Faraday rotation, radio pressures in agreement with the X-ray gas pressure, and a radio X-ray spatial anti-correlation. A few cooling sources are seen to have amorphous radio morphologies, Faraday depolarization, low radio pressure and a possible radio-X-ray spatial correlation. These properties suggest that the radio jets are disrupted and that the radio plasma is mixed with the thermal X-ray plasma. Blue continuum lobes are seen in several cooling flow central galaxies. These could be due to star formation induced by the hydrodynamical effects of the radio source or due to the scattered light from beamed emission from the active galactic nucleus.
Pervasive small-scale structure in molecular clouds
An unbiased CO survey of molecular cloud cores was completed, and the profiles were analyzed within the context of a model for emission from clumpy clouds. It was found that all sources observed contain a significant amount of structure that is not resolved with our 2.3-arcmin beam, and that the parameters which describe the degree of clumping span a remarkably narrow range of the possible values. We studied two separate samples of cloud cores: a large sample of warm cores from the Massachusetts-Stony Brook 12CO survey of the first galactic quadrant, and a sample of cool cores in the Taurus dark clouds chosen primarily on the basis of H2CO emission. We observed all sources in the 1-0 transition of 12CO and 13CO with the 5-m telescope of the Millimeter Wave Observatory. The 12CO/13CO ratios can be explained if there is unresolved structure giving rise to significant variations of opacity across the beam. Our model cloud consists of a large number of identical clumps distributed randomly in the beam. These clumps have velocity widths v small compared to the width of the observed profile, which is determined by the relative motion of the clumps. The entire cloud is isothermal and in local thermodynamic equilibrium. With these assumptions the intensity and linewidth ratios depend on three parameters: the abundance ratio; the peak 13CO opacity through a single clump, tau(0); and the average number of clumps on a line of sight N. Small tau(0) and large N correspond to the microturbulent limit, which is indistinguishable from a uniform gas distribution. In the other extreme, large tau(0) and snall N, at a given velocity at most one clump contributes to the profile on each line of sight. A figure is presented which shows the model parameters which reproduce the measured intensity and linewidth ratios for the sample of warm cores, assuming an abundance ratio of 75.
Of narrow lines and beaming in the strong-field SSC emission model
The synchrotron self-Compton (SSC) emission model for gamma-ray bursts is capable of producing narrow line features for a variety of modelled field strengths, primary electron injection distributions and burst luminosities. Multiple resonant scattering with synchrotron continuum photons efficiently traps and cools pairs in the ground state to an average energy where the Compton energy loss rate is zero. Annihilation between pairs in these cooled distributions can be very efficient. For isotropic injection of primary electrons, there is an anti-correlation of the intensity of the angular-binned emission between the portions of the continuum spectrum below the cyclotron peak and above the annihilation line feature. Small-angle emission dominates the continuum above the annihilation line feature and is smooth through the line up to the pair production cut-off, which can be above several MeV for small enough angles. The angle-averaged annihilation line is made of components which can have peak emission centered at energies away from 511 keV, due to Doppler shifting. For beamed injection,the annihilation line breaks up into relatively narrow components in the angular emission, which sum into a broad feature in the angle-averaged emission.
Manufacturing unique glasses in space
An air suspension melting technique is described for making glasses from substances which to date have been observed only in the crystalline condition. A laminar flow vertical wind tunnel was constructed for suspending oxide melts that were melted using the energy from a carbon dioxide laser beam. By this method it is possible to melt many high-melting-point materials without interaction between the melt and crucible material. In addition, space melting permits cooling to suppress crystal growth. If a sufficient amount of under cooling is accompanied by a sufficient increase in viscosity, crystallization will be avoided entirely and glass will result.
UAVSAR Active Electronically-Scanned Array
The Uninhabited Airborne Vehicle Synthetic Aperture Radar (UAVSAR) L-band (1.2-1.3 GHz) repeat pass, interferometric synthetic aperture radar (InSAR) used for Earth science applications. Using complex radar images collected during separate passes on time scales of hours to years, changes in surface topography can be measured. The repeat-pass InSAR technique requires that the radar look angle be approximately the same on successive passes. Due to variations in aircraft attitude between passes, antenna beam steering is required to replicate the radar look angle. This paper describes an active, electronically steered array (AESA) that provides beam steering capability in the antenna azimuth plane. The array contains 24 transmit/receive modules generating 2800 W of radiated power and is capable of pulse-to-pulse beam steering and polarization agility. Designed for high reliability as well as serviceability, all array electronics are contained in single 178cm x 62cm x 12 cm air-cooled panel suitable for operation up 60,000 ft altitude.
Post-sunset cooling behavior of the lunar surface.
Differential IR flux scans at 22 microns have been made across the nighttime lunar surface over a range of phases before and after new moon. The differential chopping technique effectively cancels atmospheric emission in the beam path but records the flux difference between adjacent resolution elements on the lunar disk. The scans show that the brightness temperature gradient across the highlands after sunset is much greater than that across the western maria. The large gradients consistently disappear approximately 3.5 days after sunset. The postsunset enhancement could be due to surface roughness in the highlands or to a significant surface rock population with a mean size of approximately 0.5 m.
Resistance welding graphite-fiber composites
High-strength joints are welded in seconds in carbon-reinfored thermoplastic beams. Resistance-welding electrode applies heat and pressure to joint and is spring-loaded to follow softening material to maintain contact; it also holds parts together for cooling and hardening. Both transverse and longitudinal configurations can be welded. Adhesive bonding and encapsulation are more time consuming methods and introduce additional material into joint, while ultrasonic heating can damage graphite fibers in composite.
Effects of warm streaming electrons on electrostatic shock solutions
A plasma model consisting of warm downward streaming electrons, cool Boltzmann electrons, cold upward streaming ions, and hot Boltzmann ions is considered. It is shown that there is little difference between having a finite temperature in the electron beam and leaving the beam cold. This implies a greater utility for a cold electron beam model, and adds weight to the idea that the smaller amplitude electrostatic shocks seen in conjunction with ion beams are nonlinear ion acoustic modes.
Project Report: Design and Analysis for the Deep Space Network BWG Type 2 Antenna Feed Platform
The following report explains in detail the solid modeling design process and structural analysis of the LNA (Low Noise Amplifier) feed platform to be constructed and installed on the new BWG (Beam Wave Guide) Type-2 tracking antenna in Canberra, Australia, as well as all future similar BWG Type-2 antennas builds. The Deep Space Networks new BWG Type-2 antennas use beam waveguides to funnel and 'extract' the desired signals received from spacecraft, and the feed platform supports and houses the LNA(Low Noise Amplifier) feed-cone and cryogenic cooling equipment used in the signal transmission and receiving process. The mandated design and construction of this platform to be installed on the new tracking antenna will be used and incorporated on all future similar antenna builds.
Oxidation resistant porous material for transpiration cooled vanes
Porous metal sheet with controlled permeability was made by space winding and diffusion bonding fine wire. Two iron-chromium-aluminum alloys and three-chromium alloys were used: GE 1541 (Fe-Cr-Al-Y), H 875 (Fe-Cr-Al-Si), TD Ni Cr, DH 245 (Ni-Cr-Al-Si) and DH 242 (Ni-Cr-Si-Cb). GE 1541 and H 875 were shown in initial tests to have greater oxidation resistance than the other candidate alloys and were therefore tested more extensively. These two materials were cyclic furnace oxidation tested in air at 1800 and 2000 F for accumulated exposure times of 4, 16, 64, 100, 200, 300, 400, 500, and and 600 hours. Oxidation weight gain, permeability change and mechanical properties were determined after exposure. Metallographic examination was performed to determine effects of exposure on the porous metal and electron beam weld joints of porous sheet to IN 100 strut material. Hundred hour stress rupture life and tensile tests were performed at 1800 F. Both alloys had excellent oxidation resistance and retention of mechanical properties and appear suitable for use as transpiration cooling materials in high temperature gas turbine engines.
Variation of the pulse profile of Hercules X-1
The X-ray pulsar Her X-1 was observed in an on-state during its 35th cycle of activity in May, 1983 using the gas scintillation proportional counter (GSPC) array of the Tenma X-ray astronomy satellite. The outstanding features observed during the declining phase of the on-state included: a sharp decrease in the main X-ray pulse amplitude; and a steady increase in the column density of cool matter. On the basis of the spectral shape of the pulses, it is suggested that the main phase was attenuated due to electron scattering of the X-ray beam in a highly ionized medium located 3 x 10 to the 8th cm from the neutron star. Near the end of the on-state, the main pulse totally disappeared and a plain sinusoidal profile was observed. The observed pulse profiles are reproduced in graphic form.
BL Lacertae objects, Fanaroff-Riley type I radio sources, and cluster cooling flows
The correctness of the view that the Fanaroff-Riley type I (F-R I) radio galaxies and the BL Lac objects are intrinsically the same and that the strong emission seen in BL Lac may be the result of beaming of radiation from the galactic nucleus is examined. Expressions are derived for the surface brightness of scattered beams of polarized or unpolarized radiation, and the expected scattered light surface is calculated assuming the beams have spectra and fluxes consistent with those observed for BL Lac objects. The models are compared to recent observations of lobes of excess, polarized blue light in Cy-A, and observations of lobes of UV light in the central regions of the cD galaxies in A1795 and A2597. It was found that the models predict scattered surface brightnesses in reasonable agreement with those observed. If these lobes are indeed scattered light, this would indicate that F-R I radio galaxies do possess beams of radiation with apparent luminosities similar to BL Lac objects and that the radiation is actively beamed and not merely obscured by a torus of dust around the nucleus.