Search NASA⌕ Search

SEARCH · Search NASA

Results for “Bulk density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Steepening of nonlinear waves in the solar wind.

Two shock-like structures (i.e., abrupt step-like increases in number density, bulk speed, and proton temperature) were found in the data from Mariner 5 at 0.98 AU on June 26 and at 0.85 AU on Aug. 29, 1967. The thickness of these 'structures' determined from the magnetic field data was more than 1000 proton Larmor radii. They were also observed by Explorer 33, 34, and 35 at 1 AU, where the thicknesses were much smaller than in the Mariner 5 data. It is suggested that these two structures were nonlinear magnetoacoustic waves that were in the processes of steepening. It is further suggested that shocks would be formed just beyond 1 AU. These structures were not associated with corotating streams, but they could be associated with impressive solar events in which a flare was followed by type 2 and type 4 radio emission and a rare chromospheric wave.

Chao, J. K.↗
NASA NTRS1973

Solar albedo and spectral reflectance for Apollo 15 and 16 lunar fines

The spectral directional reflectance of Apollo 15 and 16 fines was obtained for bulk densities of approximately 1000 and 1600 kg/cu m. The solar albedo as a function of illumination was calculated from these results. Comparison of solar albedos shows that Apollo 11, 12, and 15 soils fall into one group and the Apollo 14 and 16 soil results into a second group corresponding to mare or lunar highland materials.

Birkebak, R. C.↗
NASA NTRS1974

Apollo drill core depth relationships

Preliminary depth relationships are presented for the Apollo 15, 16, and 17 drill core samples. For a given depth in any of these drill stems, the in situ lunar surface depth can be estimated. Ranges of uncertainty are also established, based on percent core recovery and degree of sample disturbance. The most likely explanation for the sample disturbance observed in the top three sections of the Apollo 16 drill stem is sample migration after the stem was capped on the lunar surface; essentially no sample was lost. Similar disturbance occurred in the Apollo 17 drill core, although to a lesser degree. The average original bulk densities (i.e., before any disturbance occurred) of the Apollo 15, 16, and 17 drill cores are 1.76, 1.59, and 1.87 g/cu cm, respectively. The Apollo 15 and 17 values are probably close to the in situ values; but the Apollo 16 average in situ density could be as much as 13% less than the already low density in the drill core.

Carrier, W. D., III↗
NASA NTRS1974

The effects of shock wave compaction on the transition temperatures of A15 structure superconductors

Several superconductors with the A15 structure exhibit a positive pressure coefficient, indicating that their transition temperatures increase with applied pressure. Powders of the composition Nb3Al, Nb3Ge, Nb3(Al0.75Ge0.25), and V3Si were compacted by explosive shock waves. The superconducting properties of these materials were measured before and after compaction and it was found that regardless of the sign of the pressure coefficient, the transition temperature is always lowered. The decrease in transition temperature is associated with a decrease in the particle diameter. The shock wave passage through a 3Nb:1Ge powder mixture leads to the formation of at least one compound (probably Nb5Ge3). However, the formation of the A15 compound Nb3Ge is not observed. Elemental niobium powder can be compacted by converging shock waves close to the expected value of the bulk density. Under special circumstances a partial remelting in the center of the sample is observed.

Otto, G. H.↗
NASA NTRS1975

Experimental shock metamorphism of maximum microcline

A series of recovery experiments are conducted to study the behavior of single-crystal perthitic maximum microcline shock-loaded to a peak pressure of 417 kbar. Microcline is found to deform in a manner similar to quartz and other alkali feldspars. It is observed that shock-induced cleavages occur initially at or slightly below the Hugoniot elastic limit (60-85 kbar), that shock-induced rather than thermal disordering begins above the Hugoniot elastic limit, and that all types of planar elements form parallel to crystallographic planes of low Miller indices. When increasing pressure, it is found that bulk density, refractive indices, and birefringence of the recovered material decrease and approach diaplectic glass values, whereas disappearance and weakening of reflections in Debye-Sherrer patterns are due to disordering of the feldspar lattice.

Robertson, P. B.↗
NASA NTRS1976

The 'soil' of Mars /Viking 1/

The immediate environs of the Viking 1 lander are described, and the techniques employed to deduce the properties of the two different 'soil' types there are summarized. It is shown that the surface in the immediate vicinity of the lander consists of an area with fine-grained materials ('Sandy Flats') and a rocky area set in a matrix of finer-grained material ('Rocky Flats'). Estimates are given for the bulk density, particle density, particle size distribution, cohesion, angle of internal friction, and penetration resistance of the surface layer in each area. Footpad penetration into the surface layer is discussed, and wind removal of particles is examined. It is concluded that the surface layer of the Viking 1 landing site contains loess, dune sand, lunar nominal soil, lag gravel, and bare rock.

Shorthill, R. W.↗
NASA NTRS1977

Interplanetary medium data book, appendix

Computer generated listings of hourly average interplanetary plasma and magnetic field parameters are given. Parameters include proton temperature, proton density, bulk speed, an identifier of the source of the plasma data for the hour, average magnetic field magnitude and cartesian components of the magnetic field. Also included are longitude and latitude angles of the vector made up of the average field components, a vector standard deviation, and an identifier of the source of magnetic field data.

King, J. H.↗
NASA NTRS1977

Evacuated load-bearing high performance insulation study

A light weight, vacuum jacketed, load bearing cryogenic insulation system was developed and tested on a 1.17-m (46-in.) spherical test tank. The vacuum jacket consists of 0.08 mm (0.003 in.) thick 321 stainless steel formed into a wedge design that allows elastic jacket movements as the tank shrinks (cools) or expands (warms up or is pressurized). Hollow glass spheres, approximately 80 micrometers in diameter with a bulk density of 0.069 g/cc (4.3 lb cubic foot), provide the insulating qualities and one atmosphere load bearing capability required. The design, fabrication, and test effort developed the manufacturing methods and engineering data needed to scale the system to other tank sizes, shapes, and applications. The program demonstrated that thin wall jackets can be formed and welded to maintain the required vacuum level of .013 Pa yet flex elastically for multiple reuses. No significant shifting or breakage of the microspheres occurred after 13 simulated Space Tug flight cycles on the test tank and a hundred 1 atmosphere load cycles in a flat plate calorimeter. The test data were then scaled to the Space Tug LO2 and LH2 tanks, and weight, thermal performance, payload performance, and costs were compared with a helium purged multilayer insulation system.

Parmley, R. T.↗
NASA NTRS1977

Surface materials of the Viking landing sites

In the present paper, the soil characteristics at the Viking sites are discussed in terms of bulk density, particle size, angle of internal friction, cohesion, and moisture content. At the Viking Lander-1 site, there is a relatively weak drift material, along with more cohesive materials of a rocky area, and rocks. A variety of materials are present also at the Lander-2 site. Moisture content is low as compared to terrestrial soils. Current estimates of some of the physical properties are tabulated and discussed.

Moore, H. J.↗
NASA NTRS1978

Meteoroids from periodic comet d'Arrest

The predicted anomalous tail of periodic comet d'Arrest was photographed and photometrically studied. The derived particle-size distribution function varies inversely according to slightly higher than the 4-th power of the size. Particle dimensions span a few orders of magnitude, the mean size being in the general range of 0.01 to 0.1 cm depending on the assumed bulk density. The determination of the amount of the ejected dust is complicated by large uncertainties in the particle albedo. The product of the particle albedo and of the production rate of meteoroids that remain gravitationally bound to the solar system is found to be about 3000 g/s at the time of maximum activity and some 200 g/s when averaged over the comet's revolution period. The contribution of the comet to the interplanetary dust cloud is insignificant, unless the albedo of the debris from the comet is as low as 0.1 percent.

Sekanina, Z.↗
NASA NTRS1978

Postperihelion interference filter photometry of the 'annual' Comet P/Encke

Interference filter photometry was taken of Comet Encke on June 14, 1974 (1.07 AU heliocentric distance, postperihelion) at the CTIO (Cerro Tololo Interamerican Observatory) 150-cm reflector. Production rates were calculated as 4.1 x 10 to the 23nd power mol/sec for CN, 5.3 x 10 to 23nd power mol/sec for C3, and 4.3 x 10 to the 24th power mol/sec for C2. These are about three times smaller than at comparable heliocentric distance preperihelion, assuming a value of 100 for the ratio H2O/(C2 + C3 + CN). An upper limit was placed on the production of nonvolatiles at about one-third that of volatiles in mass by assuming a bulk density of 1 g/cu cm, a particle geometric albedo of 0.1, and a phase function of 0.2.

Newburn, R. L., Jr.↗
NASA NTRS1979

Preflight status of the External Tank portion of the Space Shuttle Main Propulsion System

The development progress of the External Tank (ET) of the Shuttle Main Propulsion System (MPS) is described. 87% of ET propulsion components have satisfactorily completed qualification tests in preparation for the first Shuttle flight and their performance has been verified in the Main Propulsion Test Article (MPTA) firings of up to 100 seconds duration. The design changes in the LH2 tank pressurant diffuser, the LO2 feed system, and the ground test LO2 tank are discussed. Propellant loading information from MPTA tests may be used to predict loading operations and performance at KSC and VAFB, while ullage pressure profiles and boil-off rates during loading, chilldown rates, and final bulk density data have been obtained with geyser suppression evaluated and loading procedures established and verified. The MPTA test experience provided data to evaluate pressurization system and ET to Orbiter interface propellant performance noting thus that the fluid interface requirements will be satisfied for the first Shuttle flight. The Intertank inerting system was found to be effective in minimizing hazardous gas mixtures and full scale separation tests of the ET to Ground Umbilical Carrier Plate system were successfully completed.

Norquist, L.↗
NASA NTRS1980

Mass loss of a TEOS-coated, reinforced carbon-carbon composite subjected to a simulted shuttle entry environment

Coated, reinforced carbon-carbon (RCC) is used for the leading edges of the space shuttle. The mass loss characteristics of RCC specimens coated with tetraethyl orthosilicate (TEOS) were determine for conditions which simulated the environment expected at the lug attachment area of the leading edge. Mission simulation included simultaneous application of load, temperature, and oxygen partial pressure. Maximum specimen temperature was 900 K (1160 F). Specimens were exposed for up to 80 simulated missions. Stress levels up to 6.8 MPa (980 psi) did not significantly affect the mass loss characteristics of the TEOS-coated RCC material. Mass loss was correlated with the bulk density of the specimens.

Stroud, C. W.↗
NASA NTRS1979

Mass-radius relationships in icy satellites

Using published laboratory data for H2O ice, a modeling technique was developed by which the bulk density, density and temperature profile, rotational moment of inertia, central pressure, and location of the rock-ice interface can all be obtained as a function of the radius, the heliocentric distance, and the silicate composition. Models of the interiors of Callisto, Ganymede, Europa, Rhea, and Titan are given, consistent with present mass and radius data. The radius and mass of spheres of ice under self-gravitation for two different temperature classes are given (103 and 77 deg K). Measurements of mass, radius and I/MR2 by spacecraft can be interpreted by this model to yield substantial information about the internal structure and the ice/rock ratio of the icy satellites of Jupiter and Saturn.

Lupo, M. J.↗
NASA NTRS1980

Evaluation of gravimetric ground truth soil moisture data collected for the agricultural soil moisture experiment, 1978 Colby, Kansas, aircraft mission

Soil moisture data acquired to support the development of algorithms for estimating surface soil moisture from remotely sensed backscattering of microwaves from ground surfaces are presented. Aspects of field uniformity and variability of gravimetric soil moisture measurements are discussed. Moisture distribution patterns are illustrated by frequency distributions and contour plots. Standard deviations and coefficients of variation relative to degree of wetness and agronomic features of the fields are examined. Influence of sampling depth on observed moisture content an variability are indicated. For the various sets of measurements, soil moisture values that appear as outliers are flagged. The distribution and legal descriptions of the test fields are included along with examinations of soil types, agronomic features, and sampling plan. Bulk density data for experimental fields are appended, should analyses involving volumetric moisture content be of interest to the users of data in this report.

Arya, L. M.↗
NASA NTRS1980

Early lunar petrogenesis, oceanic and extraoceanic

An attempt is made to ascertain which (if any) pristine nonmare rocks, other than KREEPy ones, are not cumulates from the magma ocean. It is noted that the only pristine rocks having bulk densities low enough to have formed by floating above the magma ocean are the ferroan anorthosites, which are easily recognizable as a discrete subset of pristine rocks in general, on the basis of mineral composition relationships. The other class of pristine nonmare rocks, the Mg-rich rocks, did not form from the same magma that produced the ferroan anorthosites. It is suggested that they were formed in layered noritic-troctolitic plutons. These plutons, it is noted, were apparently intruded at, or slightly above, the boundary between the floated ferroan anorthosite crust and the underlying complementary mafic cumulates. It is thought that the parental magmas of the plutons may have arisen by partial melting of either deep mafic cumulates from the magma ocean or a still deeper, undifferentiated primordial layer that was not molten during the magma ocean period.

Warren, P. H.↗
NASA NTRS1980

Hektor - Nature and origin of a binary asteroid

It is argued that the elongated single body model (Dunlap and Gehrels, 1969) which reproduces the rotational light curve of 624 Hektor is unstable with respect to binary fission. It is shown that a contact binary model with ellipsoidal components of equilibrium shape matches the observed amplitude. Hektor's bulk density is inferred to be about 2.5 g/cu cm.

Weidenschilling, S. J.↗
NASA NTRS1981

Correlations between solar wind parameters and auroral kilometric radiation intensity

The relationship between solar wind properties and the influx of energy into the nightside auroral region as indicated by the intensity of auroral kilometric radiation is investigated. Smoothed Hawkeye satellite observations of auroral radiation at 178, 100 and 56.2 kHz for days 160 through 365 of 1974 are compared with solar wind data from the composite Solar Wind Plasma Data Set, most of which was supplied by the IMP-8 spacecraft. Correlations are made between smoothed daily averages of solar wind ion density, bulk flow speed, total IMF strength, electric field, solar wind speed in the southward direction, solar wind speed multiplied by total IMF strength, the substorm parameter epsilon and the Kp index. The greatest correlation is found between solar wind bulk flow speed and auroral radiation intensity, with a linear correlation coefficient of 0.78 for the 203 daily averages examined. A possible mechanism for the relationship may be related to the propagation into the nightside magnetosphere of low-frequency long-wavelength electrostatic waves produced in the magnetosheath by the solar wind.

Gallagher, D. L.↗