Search NASA⌕ Search

SEARCH · Search NASA

Results for “CORONA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

The Structure and Dynamics of the Corona - Heliosphere Connection

Determining the source at the Sun of the slow solar wind is one of the major unsolved problems in solar and heliospheric physics. First, we review the existing theories for the slow wind and argue that they have difficulty accounting for both the observed composition of the wind and its large angular extent. A new theory in which the slow wind originates from the continuous opening and closing of narrow open field corridors, the S-Web model, is described. Support for the S-Web model is derived from MHD solutions for the quasisteady corona and wind during the time of the August 1, 2008 eclipse. Additionally, we perform fully dynamic numerical simulations of the corona and heliosphere in order to test the S-Web model as well as the interchange model proposed by Fisk and co-workers. We discuss the implications of our simulations for the competing theories and for understanding the corona - heliosphere connection, in general.

Antiochos, Spiro K.↗

The Destruction and Recreation of the X-Ray Corona in a Changing-look Active Galactic Nucleus

We present the drastic transformation of the X-ray properties of the active galactic nucleus 1ES 1927+654, following a changing-look event. After the optical/UV outburst the power-law component, produced in the X-ray corona, disappeared, and the spectrum of 1ES 1927+65 instead became dominated by a blackbody component (kT ∼ 80− 120 eV). This implies that the X-ray corona, ubiquitously found in AGN, was destroyed in the event. Our dense ∼ 450 day long X-ray monitoring shows that the source is extremely variable in the X-ray band. On long time scales the source varies up to ∼ 4 dex in ∼ 100 days, while on short timescales up to ∼ 2 dex in ∼ 8 hours. The luminosity of the source is found to first show a strong dip down to ∼ 10(exp 40) erg/s, and then a constant increase in luminosity to levels exceeding the pre-outburst level &300 days after the optical event detection, rising up asymptotically to ∼ 2 × 10(exp 44) erg/s. As the X-ray luminosity of the source increases, the X-ray corona is recreated, and a very steep power-law component (Γ ≃ 3) reappears, and dominates the emission for 0.3–2 keV luminosities & 10(exp 43.7) erg/s, ∼ 300 days after the beginning of the event. We discuss possible origins of this event, and speculate that our observations could be explained by the interaction between the accretion flow and debris from a tidally disrupted star. Our results show that changing-look events can be associated with dramatic and rapid transformations of the innermost regions of accreting SMBHs.

C. Ricci↗

Inverse Compton Cooling in the Coronae of Simulated Black Hole Accretion Flows

We present a formulation for a local cooling function to be employed in the diffuse, hot corona region of 3D GRMHD simulations of accreting black holes. This new cooling function calculates the cooling rate due to inverse Compton scattering by considering the relevant microphysics in each cell in the corona and approximating the radiation energy density and Compton temperature there by integrating over the thermal seed photon flux from the disk surface. The method either assumes ion and electron tem- peratures are equal (1T), or calculates them separately (2T) using an instantaneous equilibrium approach predicated on the actual relevant rate equations (Coulomb and Compton). The method is shown to be consistent with a more detailed ray-tracing calculation where the bulk of the cooling occurs, but is substantially less costly to per- form. As an example, we apply these methods to a harm3d simulation of a 10M⊙, non-spinning black hole, accreting at nominally 1% the Eddington value. Both 1T and 2T approaches lead to increased radiative efficiency and a larger fraction of total cooling in the corona as compared to the original target-temperature cooling function used by harm3d, especially in the 1T case. Time-averaged post-processing reveals that the continuum spectral observations predicted from these simulations are qualitatively similar to actual X-ray binary data, especially so for the 1T approach which yields a harder power-law component (Γ = 2.25) compared to the 2T version (Γ = 2.53).

Brooks E. Kinch↗

The Corona Contracts in a Black-Hole Transient

The geometry of the accretion flow around stellar-mass black holes can change on timescales of days to months1–3. When a black hole emerges from quiescence (that is, it ‘turns on’ after accreting material from its companion) it has a very hard (high-energy) X-ray spectrum produced by a hot corona4,5 positioned above its accretion disk, and then transitions to a soft (lower-energy) spectrum dominated by emission from the geometrically thin accretion disk, which extends to the innermost stable circular orbit6,7. Much debate persists over how this transition occurs and whether it is driven largely by a reduction in the truncation radius of the disk8,9 or by a reduction in the spatial extent of the corona10,11. Observations of X-ray reverberation lags in supermassive black-hole systems12,13 suggest that the corona is compact and that the disk extends nearly to the central black hole14,15. Observations of stellar-mass black holes, however, reveal equivalent (mass-scaled) reverberation lags that are much larger16, leading to the suggestion that the accretion disk in the hard-X-ray state of stellar-mass black holes is truncated at a few hundreds of gravitational radii from the black hole17,18. Here we report X-ray observations of the black-hole transient MAXI J1820+07019,20. We find that the reverberation time lags between the continuum-emitting corona and the irradiated accretion disk are 6 to 20 times shorter than previously seen. The timescale of the reverberation lags shortens by an order of magnitude over a period of weeks, whereas the shape of the broadened iron K emission line remains remarkably constant. This suggests a reduction in the spatial extent of the corona, rather than a change in the inner edge of the accretion disk.

E. Kara↗

Transient Events in the Chromosphere and Corona with IBIS, ALMA, IRIS, and XRT

The connection between the photosphere, chromosphere, and corona is essential for understanding energy flow throughout the solar atmosphere. Recent work shows strong correlations between observations of the chromospheric mm-continuum (e.g., ALMA) and the low chromospheric H alpha (e.g., IBIS), and also between mm-continuum and the upper chromosphere and corona, such as SDO and XRT. However, the features which correlate between ALMA and IBIS are not those that correlate between ALMA and observations higher in the atmosphere. In this work, we examine transient features observed from the photosphere to the corona, and determine when and where the atmospheric features agree, and when they diverge. In particular, we show that the established IBIS line-width and ALMA Band 3 relationships break down during transient events (such as blue-wing excursions), though the ALMA and the H-alpha blue wing transients appear related. We also explore features of these transients that appear to foreshadow coronal signatures and find consistent connections and time-lags between transients observed in ALMA and features seen in the upper atmosphere.

A.R. Kobelski↗

The Hyper-inflation Stage in the Coronal Mass Ejection Formation: A Missing Link That Connects Flares, Coronal Mass Ejections, and Shocks in the Low Corona

We analyze the formation and three-dimensional (3D) evolution of two coronal mass ejections (CMEs) and their associated waves in the low corona via a detailed multi-viewpoint analysis of extreme-ultraviolet observations. We analyze the kinematics in the radial and lateral directions and identify three stages in the early evolution of the CME: (1) a hyper-inflation stage, when the CME laterally expands at speeds of ∼1000 km/s, followed by (2) a shorter and slower expansion stage of a few minutes and ending with (3) a self-similar phase that carries the CME into the middle corona. The first two stages coincide with the impulsive phase of the accompanying flare, the formation and separation of an EUV wave from the CME, and the start of the metric type II radio burst. Our 3D analysis suggests that the hyper-inflation phase may be a crucial stage in the CME formation with wide-ranging implications for solar eruption research. It likely represents the formation stage of the magnetic structure that is eventually ejected into the corona, as the white-light CME. It appears to be driven by the injection of poloidal flux into the ejecting magnetic structure, which leads to the lateral (primarily) growth of the magnetic flux rope. The rapid growth results in the creation of EUV waves and eventually shocks at the CME flanks that are detected as metric type II radio bursts. In other words, the hyper-inflation stage in the early CME evolution may be the "missing" link between CMEs, flares, and coronal shocks.

Solar coronal waves↗

Understanding the Variability of Helium Abundance in the Solar Corona Using Three Fluid Modeling and Ultraviolet Observations

The variability of helium abundance in the solar corona and the solar wind is an important signature of solar activity, solar cycle, and solar wind sources, as well as coronal heating processes. Motivated by recently reported remote-sensing UV imaging observations by Helium Resonance Scattering in the Corona and Heliosphere payload sounding rocket of helium abundance in the inner corona on 2009 September 14 near solar minimum, we present the results of the first three-dimensional three-fluid (electrons, protons, and alpha particles) model of tilted coronal streamer belt and slow solar wind that illustrates the various processes leading to helium abundance differentiation and variability. We find good qualitative agreement between the three-fluid model and the coronal helium abundance variability deduced from UV observations of streamers, providing insight on the effects of the physical processes, such as heating, gravitational settling, and interspecies Coulomb friction in the outflowing solar wind that produce the observed features. The study impacts our understanding of the origins of the slow solar wind.

Leon Ofman↗

Origin of Corona-Dominated Topographic Rises on Venus

Both large-scale mantel upwellings, comparable to terrestrial hotspots on Earth, and smaller scale mantel upwellings, known as coronae, occur on Venus. Corona-dominated rises have many of the characteristics of large scale mantle upwellings, or hotspots, such as broad topographic rises greater than 1000km in diameter and large positive gravity anomalies.

Venus Corona-dominated rises hotspots mantle upwel↗

Probing the Solar Corona with Radio Ranging Measurements

An asymmetry in the radial variation of electron density above the east and west limbs of the Sun was inferred from centimeter wavelength ranging measurements conducted by Voyager 2 during its 1985 solar conjunction. The Voyager 2 ranging measurements are compared with the Mauna Loa Solar Observatory white-light coronagraph measurements of the underlying corona. Corona probing abilities are summarized.

sun solar corona radio ranging coronagraph white-l↗

Destruction of Sun-Grazing Comet C-2011 N3 (SOHO) Within the Low Solar Corona

Observations of comets in Sun-grazing orbits that survive solar insolation long enough to penetrate into the Suns inner corona provide information on the solar atmosphere and magnetic field as well as on the makeup of the comet. On 6 July 2011, the Solar Dynamics Observatory (SDO) observed the demise of comet C2011 N3 (SOHO) within the low solar corona in five wavelength bands in the extreme ultraviolet (EUV). The comet penetrated to within 0.146 solarradius (100,000 kilometers) of the solar surface before its EUV signal disappeared.

ultraviolet emissions↗

Persistent Doppler Shift Oscillations Observed with HINODE-EIS in the Solar Corona: Spectroscopic Signatures of Alfvenic Waves and Recurring Upflows

Using data obtained by the EUV Imaging Spectrometer on board Hinode, we have performed a survey of obvious and persistent (without significant damping) Doppler shift oscillations in the corona. We have found mainly two types of oscillations from February to April in 2007. One type is found at loop footpoint regions, with a dominant period around 10 minutes. They are characterized by coherent behavior of all line parameters (line intensity, Doppler shift, line width, and profile asymmetry), and apparent blueshift and blueward asymmetry throughout almost the entire duration. Such oscillations are likely to be signatures of quasi-periodic upflows (small-scale jets, or coronal counterpart of type-II spicules), which may play an important role in the supply of mass and energy to the hot corona. The other type of oscillation is usually associated with the upper part of loops. They are most clearly seen in the Doppler shift of coronal lines with formation temperatures between one and two million degrees. The global wavelets of these oscillations usually peak sharply around a period in the range of three to six minutes. No obvious profile asymmetry is found and the variation of the line width is typically very small. The intensity variation is often less than 2%. These oscillations are more likely to be signatures of kink/Alfv´en waves rather than flows. In a few cases, there seems to be a π/2 phase shift between the intensity and Doppler shift oscillations, which may suggest the presence of slow-mode standing waves according to wave theories. However, we demonstrate that such a phase shift could also be produced by loops moving into and out of a spatial pixel as a result of Alfv´enic oscillations. In this scenario, the intensity oscillations associated with Alfv´enic waves are caused by loop displacement rather than density change. These coronal waves may be used to investigate properties of the coronal plasma and magnetic field.

Solar Corona↗

Coronae of Stars with Supersolar Elemental Abundances

Coronal elemental abundances are known to deviate from the photospheric values of their parent star, with the degree of deviation depending on the first ionization potential (FIP). This study focuses on the coronal composition of stars with supersolar photospheric abundances. We present the coronal abundances of six such stars: 11 LMi, iota Hor, HR 7291, tau Boo, and alpha Cen A and B. These stars all have high-statistics X-ray spectra, three of which are presented for the first time. The abundances we measured were obtained using the line-resolved spectra of the Reflection Grating Spectrometer (RGS) in conjunction with the higher throughput EPIC-pn camera spectra onboard the XMM-Newton observatory. A collisionally ionized plasma model with two or three temperature components is found to represent the spectra well. All elements are found to be consistently depleted in the coronae compared to their respective photospheres. For 11 LMi and tau Boo no FIP effect is present, while iota Hor, HR 7291, and alpha Cen A and B show a clear FIP trend. These conclusions hold whether the comparison is made with solar abundances or the individual stellar abundances. Unlike the solar corona, where low-FIP elements are enriched, in these stars the FIP effect is consistently due to a depletion of high-FIP elements with respect to actual photospheric abundances. A comparison with solar (instead of stellar) abundances yields the same fractionation trend as on the Sun. In both cases, a similar FIP bias is inferred, but different fractionation mechanisms need to be invoked.

stars: abundances / stars: coronae / stars: genera↗

Editorial: Flux Rope Interaction With the Ambient Corona: From Jets to CMEs

Eruptive events within the Sun’s corona occur across a broad range of scales, from abundant small-scale jets to highly energetic coronal mass ejections (CMEs) (e.g., Webb and Howard, 2012; Raouafi et al., 2016; Kumar et al., 2021). Flux ropes have been understood to be a fundamental constituent of CMEs for many years, but it has only been more recently that their role in smaller eruptive events has become more appreciated (e.g., Sterling et al., 2015; Wyper et al., 2017). The key to understanding the differing morphology and nature of eruptions on these vastly differing scales is to understand the nature of the interaction between the flux ropes involved and the magnetic field of the surrounding corona. This Research Topic invited perspectives on (and examples of) flux rope eruptions across this broad range of scales, from formation to ejection, with the aim of highlighting commonalities and differences to aid in ultimately building a common framework for their understanding. Starting at the smallest scales, Schmieder presented a historically ordered review of jets and surges. The parallel improvements in instrumentation, physical insight and numerical simulations over time were highlighted along with the ways in which improvements in one area led to developments in another. Overall, jets of all forms are presented as the result of magnetic reconnection between two magnetic domains, with the reconnection involving a null point, bald patch separatrix or quasi-separatrix layer. In particular, jets with observed rotational motions often involve the transfer of twist from a small-scale filament or flux rope by reconnection across the separatrix.

solar corona and wind↗

Observations of the Polarized Solar Corona During the Annular Eclipse of 14 October 2023

We present results of a dual eclipse expedition to observe the solar corona from two sites during the annular solar eclipse of 14 October 2023 using a novel coronagraph designed to be accessible for amateurs and students to build and deploy. The coronagraph (CATEcor) builds on the standardized eclipse observing equipment developed for the Citizen CATE 2024 experiment. The observing sites were selected for likelihood of clear observations, for historic relevance (near the Climax site in the Colorado Rocky Mountains), and for centrality to the annular eclipse path (atop Sandia Peak above Albuquerque, New Mexico). The novel portion of CATEcor is an external occulter assembly that slips over the front of a conventional dioptric telescope, forming a shaded-truss externally occulted coronagraph. CATEcor is specifically designed to be easily constructed in a garage or “makerspace” environment. We successfully observed some bright features in the solar corona to an altitude of approximately 2.25 R during the annular phases of the eclipse. Future improvements to the design, in progress now, will reduce both stray light and image artifacts; our objective is to develop a design that can be operated successfully by amateur astronomers at sufficient altitude even without the darkened skies of a partial or annular eclipse.

Solar instrumentation↗

The magnetic field structure in the active solar corona.

The structure of the magnetic field of the active solar corona is discussed with reference to optical and radio observations of the solar atmosphere. Eclipse observations provide evidence of fine scale structures in the solar atmosphere that appear to relate to the coronal magnetic field. The coronal magnetic field used for comparison is calculated from potential theory; the influence of solar activity upon the potential theory field is discussed with reference to observations of the Faraday rotation of a microwave signal from Pioneer 6 as it was occulted by the solar atmosphere. Evidence has been found suggesting the existence of expanding magnetic bottles located at 10 solar radii above flaring active regions. The dynamics of these events is discussed. It is further suggested that these magnetic bottles are an important component in the solar corona.

Schatten, K. H.↗

Photometric intensity and polarization measurements of the solar corona.

Use of a satellite photometric observatory (SPO) to measure the solar corona from Miahuatlan, Mexico during the Mar. 7, 1970, total eclipse of the sun. The SPO is equipped with a 24-in. Cassegrainian telescope, a four-channel photoelectric photometer, a Wollaston prism, and a rotating half-wave plate. Simultaneous measurements were made of the two orthogonal components of coronal light in the B and R bands of the UBVRI system. A 1-minute arc aperture was scanned from the lunar disk center out to five solar radii in a series of spirals of gradually increasing radius. For the first time, simultaneous multicolor intensity, degree, and angle of polarization profiles are computed from photoelectric measurements. Comparison of the variations of the measurements for each spiral scan yield a detailed picture of the intensity and polarization features in the K corona.

Mcdougal, D. S.↗

Structure of the chromosphere-corona transition region.

The structure and energy balance of the chromosphere-corona transition region is investigated by means of a static, planar model which is compared with the results of XUV-resonance-line observations. In this model, the transition region is heated by thermal conduction from the corona and cooled by radiative losses. Comparison of the model with observational results implies that this is the dominant process in the energy balance of the transition region, and that the base of the transition region is inherently nonstatic and/or nonplanar. The model explains the observational finding of Noyes et al. (1970) that the number density and the downward heat flux both increase by the same factor from quiet regions to active regions.

Moore, R. L.↗